journal article·2018-11

Characteristics of hot mix asphalt containing steel slag aggregate according to temperature and void percentage

Kyungnam Kim, Shin Haeng Jo, Nakseok Kim, Hyunwook Kim

Publisher page

Abstract

Abstract This study investigated the behavior of hot mix asphalt mixture containing steel slag aggregate (SHMA). Compared to hot mix asphalt mixture containing granite aggregate (GHMA), SHMA increased strains by approximately 15%; however, a void percentage of 4.2% or higher resulted in a strain similar to that of GHMA. Furthermore, the dynamic modulus of SHMA remained higher than that of GHMA because SHMA exhibited favorable aggregate interlock due to its high strength and grain shape. In addition, when the target air void was increased to 4.5%, SHMA showed improvements in rut resistance, tensile strength, and toughness of 121, 110, and 114%, respectively, compared to GHMA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A study on aggregate gradation of 10 mm dense-graded asphalt mixture using slag aggregate10.12652/Ksce.2015.35.6.1367 ↗
2. Characterisation and utilisation of steel slag for the construction of roads and highways
3. Potentials of steel slag and copper mine tailings as construction materials
4. Effect of moisture damage on gap-graded asphalt mixture incorporating electric arc furnace steel slag and copper mine tailings
5. Evaluation of asphalt mixtures incorporating electric arc furnace steel slag and copper mine tailings for road construction10.1016/j.trgeo.2014.09.004 ↗
6. The present situation of production and utilization of steel slag in Korea and other countries
7. Recent improvements in quality of steel slag aggregates
8. Horii · 2015
9. Effects of moisture on surface chemistry of steel slags and steel slag-asphalt paving mixes
10. Federal Highway Administration Research and Technology, User guidelines for Waste and Byproduct Materials in Pavement Construction, https://www.fhwa.dot.gov/publications/ research/infrastructure/structures/97148/ssa2.cfm (accessed 1 November 2017).
11. SYSCO electric arc furnace slag as an asphalt concrete aggregate
12. Use of steel slag aggregate in asphalt concrete mixes10.1139/l07-025 ↗
13. Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings10.1016/j.jclepro.2016.02.051 ↗
14. Volumetric properties and leaching effect of asphalt mixes with electric arc furnace steel slag and copper mine tailings
15. Evaluation of rutting potential and skid resistance of hot mix asphalt incorporating electric arc furnace steel slag and copper mine tailing
16. Performance comparative analysis of stone mastic asphalts with electric arc furnace steel slag: a laboratory evaluation10.1617/s11527-011-9773-2 ↗
17. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete10.1016/j.jhazmat.2008.09.105 ↗
18. Stroup-Gardiner · 2013
19. Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures10.1016/j.buildenv.2006.06.008 ↗
20. Performance Evaluation of asphalt mixes containing steel slag aggregate as a measure to resist studded tire wear
21. Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregate10.1177/0734242X08092025 ↗
22. Evaluating skid resistance of different asphalt concrete mixes10.1016/j.buildenv.2005.08.020 ↗
23. Chaney · 2015 · 31
24. The Ministry of Environment · 2014
25. KS F 2580 · 2017
26. Evaluation of steel slag fine aggregate in hot-mix asphalt mixtures10.3141/1583-04 ↗
27. Evaluation of correlation between aggregate gradation and dynamic modulus with statistical analysis
28. American Association of State Highway and Transportation Officials, AASHTO T-62, Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt (HMA), 2007.
29. A study on field application and laboratory performance evaluation of warm mix asphalt
30. Yu · 2012
31. Influence of air voids of hot mix asphalt on rutting within the framework of mechanistic-empirical pavement design10.1016/j.sbspro.2013.11.102 ↗
32. X.F. Li, Estimation of permanent deformation based on volumetric and stiffness properties of asphalt concrete (Ph.D. Thesis), Kangwon National University Kangwon, Korea, 2001 (in Korean).
33. Evaluation of rutting and deformation strength properties of polymer modified SMA mixtures
34. MOLIT · 2017
35. KS F 2374 · 2017
36. Multi-scale heterogeneous fracture modeling of asphalt mixture using microfabric distinct element approach
37. ASTM D 6931 · 2012
38. Discrete fracture modeling of asphalt concrete10.1016/j.ijsolstr.2009.02.006 ↗