journal article·2018-11

The effect of multi-walled carbon nanotubes on the rheological properties and hydration process of cement pastes

Dainius Leonavičius, Ina Pundienė, Giedrius Girskas, Jolanta Pranckevičienė, Modestas Kligys, Agnė Kairytė

Publisher page

Abstract

Abstract The properties of cementitious materials can be noticeably improved by the addition of carbon nanotubes (CNTs). It is important to detect the effects of the pellets containing multi-walled CNTs, dispersed in carboxyl-methyl cellulose, on the hydration process of fresh cement pastes, and physical or mechanical properties of hardened cement paste specimens, obtained without the use of commercially available surfactants and plasticisers, in order to use CNTs in cementitious materials more effectively. The influence of dispersed CNTs in different amounts (from 0 to 0.5%) on the pH and electrical conductivity values of water solutions and fresh cement pastes, as well as on the rheological properties, setting time and exothermic reaction of fresh cement pastes or on the physical and mechanical properties of hardened cement paste specimens was analysed in this work. It can be stated, that 0.005% is the marginal amount of CNTs, as amounts above 0.005% deteriorate the hydration parameters of cement pastes. This was confirmed by decreased values in electrical conductivity (approximately 17%), pH (approximately 6.8%) and dynamic viscosity (approximately 3 times) tests. Lower pH values lead to a significant retardation of the dissolution of cement minerals and this process is reflected in the setting time (prolonged by 110–130%) and maximum time (extended by 148%) or temperature (decreased by 18.4%) of exothermic reaction. Consequently, the mechanical properties of hardened cement paste specimens (after 28 days) decreased about 10%, as well as water absorption increased up to 10.6%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Smart Materials for Construction · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
2. K. Sobolev, M.F. Guterrez, How nanotechnology can change the concrete world, 2005.
3. Nano-composites: a state of the art review
4. The properties of nanocarbon tubes cement mortar incorporating mineral additives
5. Hybrid effect of carbon nanotube and nanoclay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
6. K. Sobolev, I. Flores, R. Hermosillo, L.M. Torres-Martínez, Nanomaterials and nanotechnology for high-performance cement composites, in: K. Sobolev, S.P. Shah (Eds.), Proceedings of ACI Session on Nanotechnology of Concrete: Recent Developments and Future Perspectives, 7 November 2006, Denver ACI SP-254 2008, pp. 93–120.
7. F.C. Lai, M.F.M. Zain, M. Jamil, Nano cement additives (NCA) development for OPC strength enhancer and carbon neutral cement production, in: 35th Conference on Our World in Concrete & Structures, 25–27 August, Singapore CI‐Premier PTE LTD 2010, pp. 25–27.
8. D. Bajare, G. Bumanis, G. Shakhmenko, J. Justs, High performance and conventional concrete properties affected by ashes obtained from different type of grasses, in: T.C. Holland, P.R. Gupta (Eds.). Proceedings of the 12th International Conference on Recent Advances in Concrete Technology and Sustainability Issues, October, Czech Republic, Prague 2012, pp. 318–328.
9. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
10. J.M. Makar, J.C. Margeson, J. Luh, carbon nanotube/cement composites-early results and potential applications, in: Proceedings of the 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, 22–24 August, Vancouver, Canada 2005, pp. 1–10.
11. Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites10.1016/j.cemconcomp.2006.12.011 ↗
12. Nanotubes from carbon10.1021/cr970102g ↗
13. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
14. Nanomechanics of carbon nanotubes and composites10.1115/1.1538625 ↗
15. J.M. Makar, J.J. Beaudoin, Carbon nanotubes and their application in the construction industry, in: P.J.M Bartos, J.J. Hughes, P. Trtik, W. Zhu (Eds.), Proceedings of 1st International Symposium on Nanotechnology in Construction, 23–25 June 2003, Paisley, Scotland, R. Soc. Chem. London 2004, pp. 331–341.10.1039/9781847551528-00331 ↗
16. I. Campillo, J.S. Dolado, A. Porro, High-performance Nanostructured Materials for Construction, in: P.J.M Bartos, J.J. Hughes, P. Trtik, W. Zhu (Eds.), Proceedings of 1st International Symposium on Nanotechnology in Construction, 23–25 June 2003, Paisley, Scotland, R. Soc. Chem. London 2004, pp. 215–226.10.1039/9781847551528-00215 ↗
17. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
18. SEM/AFM studies of cementitious binder modified by MWCNT and nano-sized Fe needles10.1016/j.matchar.2008.11.001 ↗
19. Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites10.1680/adcr.2008.20.2.65 ↗
20. Cement based foam concrete reinforced by carbon nanotubes
21. Inluence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete10.1016/j.conbuildmat.2011.06.035 ↗
22. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗
23. Effect of highly dispersed carbon nanotubes on the flexural toughness of cement-based composites10.1016/j.conbuildmat.2013.04.014 ↗
24. Growth of cement hydration products on single-walled carbon nanotubes10.1111/j.1551-2916.2009.03055.x ↗
25. Modifying porous cement matrices with carbon nanotubes
26. Performance of cementitious materials produced by incorporating surface treated multiwall carbon nanotubes and silica fume10.1016/j.conbuildmat.2016.03.216 ↗
27. Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite10.1016/j.compositesb.2014.09.031 ↗
28. Dispersion and alignment of carbon nanotubes in polymer matrix: a review Mater10.1016/j.mser.2005.04.002 ↗
29. Functional micro-concrete: the incorporation of zeolites and inorganic nano-particles into cement micro-structures10.1023/A:1006767809807 ↗
30. Controlled deposition of individual single-walled carbon nanotubes on chemically functionalized templates10.1016/S0009-2614(99)00209-2 ↗
31. Sonication-assisted functionalization and solubilization of carbon nanotubes10.1021/nl010083x ↗
32. Distribution of carbon nanofibers and nanotubes in cementitious composites10.3141/2142-13 ↗
33. Compressive strength and microstructure of carbon nanotubes-fly ash cement composites10.1016/j.msea.2009.09.039 ↗
34. Properties of normal-strength concrete and mortar with multi-walled carbon nanotubes10.1680/macr.12.00212 ↗
35. Dispersivity of multi-walled carbon nanotubes (MWCNT) and mechanical properties of MWCNT reinforced cement-based composite
36. Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties10.1016/S0032-3861(99)00166-4 ↗
37. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
38. M. Collepardi, J.O. Olagot, U. Skarp, R. Troli, Influence of Amorphous Colloidal Silica on the Properties of Self-compacting Concretes, Innovations and Developments, in: Proceedings of the International Conference – Concrete Materials and Construction, 9–11 September 2002, Dundee, Scotland, pp.473–483.
39. Improvement of cementitious binders by multi-walled carbon nanotubes
40. Atomic force microscopy and nanoindentation of cement pastes with nanotube dispersions10.1002/pssa.200566166 ↗
41. Alcoa calcium aluminate cement test methods brochure, Revision 5, available through Alcoa Industrial Chemicals, Frankfurt, 1999 (08/99).
42. J.C. Cracherau, N. Gabas, J. Blouin, B. Hebrard, A. Maujean, Stabilisation tartrique des vins par la carboxyméthylcellulose (C.M.C.). 2001, pp. 151–159.
43. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
44. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
45. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
46. Nanotechnology innovations for the construction industry10.1016/j.pmatsci.2013.04.001 ↗
47. Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes10.1016/j.carbon.2014.12.094 ↗
48. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using novel dispersion technique
49. Experimental investigation on the effect of multiwalled carbon nanotubes and nano-SiO2 addition on mechanical properties of hardened cement paste10.11648/j.am.20140305.13 ↗
50. Potential of carbon nanotube reinforced cement composites as concrete repaire material
51. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste10.1016/j.conbuildmat.2014.11.049 ↗
52. Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes10.1016/j.conbuildmat.2014.07.077 ↗
53. Macro- and micro-characterization of mortars produced with carbon nanotubes
54. Influence of dispersants on the properties of CNTs reinforced cement-based materials10.1016/j.conbuildmat.2016.11.053 ↗
55. Effect of carbon nanotubes on properties of cement mortars10.1016/j.conbuildmat.2013.09.019 ↗
56. Application of ultrasonic testing to describe the hydration of calcium aluminate cement at the early age10.1016/S0008-8846(00)00446-4 ↗
57. Effect of multiwalled carbon nanotubes on mechanical properties of concrete
58. Some of the physical and mechanical properties of cement composites manufactured from carbon nanotubes and bagasse fiber10.1016/j.matdes.2011.04.027 ↗