journal article·2019-01Open access

Predicting the corrosion rate of steel in cathodically protected concrete using potential shift

Arpit Goyal, Homayoon Sadeghi Pouya, Eshmaiel Ganjian, Adegoke Omotayo Olubanwo, Morteza Khorami

Abstract

Abstract The commonly accepted Cathodic Protection (CP) criterion i.e. 100 mV decay evolves from experimental investigations and may not always be accurate. Alternatively, corrosion rate monitoring can assess the adequacy of CP. This work examines the possibility of predicting the corrosion rate of steel in concrete using polarization data induced by known applied current density using Butler Volmer equation. For this, the value of cathodic Tafel slope (βc) plays an important role; decreasing βc from 210 to 60 mV, decreases the corrosion rate by 92% at 20 mA/m2 current density. The adequacy of the proposed method is evaluated by applying Impressed Current Cathodic Protection (ICCP) to concrete specimens which have a zinc rich paint (ZRP) as an external anode for a short duration of time. Results showed that to achieve at least 100 mV of depolarization, the applied current density should be at least 7 times the corrosion rate for the ZRP anode. However, this holds true, considering the short duration of the tests. Prediction of the corrosion rate of steel from potential shift forms the basis for the improved CP performance criterion for reinforced concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Early stage beneficial effects of cathodic protection in concrete structures10.1002/maco.201005803 ↗
2. Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode10.1016/j.conbuildmat.2008.12.002 ↗
3. State-of-the-art review of cathodic protection for reinforced concrete structures10.1680/jmacr.15.00083 ↗
4. Cathodic protection and cathodic prevention10.1016/0950-0618(95)00017-8 ↗
5. Effects of cathodic prevention on the chloride threshold for steel corrosion in concrete10.1016/j.electacta.2008.09.033 ↗
6. Field application of performance enhancing chemicals to metallized zinc anodes
7. US Federal Highway Administration, Long-term effectiveness of cathodic protection systems on highway structures, Publ. No. FHWA-RD-01-096, FHWA. (2001). .
8. Anode selection for protection of reinforced concrete structures
9. Modeling of potential distribution of subsea pipeline under cathodic protection by finite element method10.1002/maco.201407738 ↗
10. P. Chess, Gronvold, Karnov, Cathodic protection of steel in concrete, 1998.10.4324/9780203223031 ↗
11. British Standard Institution · 2016
12. Monitoring the passivation of steel in concrete induced by cathodic protection10.1016/S0010-938X(97)00051-6 ↗
13. Hybrid corrosion protection of chloride-contaminated concrete10.1680/coma.2008.161.4.163 ↗
14. Electrochemical polarization I. a theoretical analysis of the shape of polarization curves10.1149/1.2428653 ↗
15. Corrosion rate of steel in concrete-measurements beyond the Tafel law10.1016/j.corsci.2005.06.021 ↗
16. Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method10.1007/BF02483292 ↗
17. The corrosion protection behaviour of zinc rich epoxy paint in 3% NaCl solution10.4236/aces.2011.12009 ↗
18. Poursaee · 2016 · 249
19. Fundamentals of Corrosion Kinetics
20. Popov · 2015
21. Corrosion monitoring of reinforced concrete structures – a review10.1016/S1452-3981(23)17049-0 ↗
22. Bungey · 1982
23. Zinc-rich paint as anode for cathodic protection of steel in concrete10.1061/(ASCE)MT.1943-5533.0001243 ↗
24. NACE, Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures, NACE Int. SP0290 (2007).
25. Concrete Society Technical Report · 2004