journal article·2019-02

The influences of cement type and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates

Weichung Yeih, Jiang Jhy Chang

Publisher page

Abstract

Abstract Pervious concrete is an environment-friendly material in many aspects such as flood control, reducing heat island effect, water purification, providing better anti-skid performance in rainy days and better sound absorption capability. In this article, the influences of cement types and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates were investigated. Four types of cements (type I cement, type II cement, sulphoaluminate cement and calcium aluminate cement) were used and two curing conditions (saturated lime water curing and air curing) were considered. Results revealed that alumina, ferric oxide, tri-sulfate (AFt or ettringite) formed in pervious concrete made with sulphoaluminate cement, resulted in a serious degradation in compressive strength as well as flexural strength, especially for specimens cured in saturated lime water curing condition. Pervious concretes from type II cement showed better compressive strength and worst permeability while the one from sulphoaluminate cement shows opposite. Air Curing results were lower than lime water curing except concretes from sulphoaluminate cement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Stormwater Management Solutions · Smart Materials for Construction · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A.J. Schokker, The Sustainable Concrete Guide – Strategies and Examples, U.S. Green Concrete Council, 2010.
2. Mesoscale and microscale evaluation of surface impacts on the urban heat island effects10.1080/10298430500505325 ↗
3. Influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete
4. Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio10.1016/j.cemconres.2004.12.009 ↗
5. An experimental study on the water–purification properties of porous concrete10.1016/S0008-8846(03)00223-0 ↗
6. ACI 522.1-13, Specification for Pervious Concrete Pavement, ACI, 2013.
7. BS 7533-13: 2009, Pavements Constructed with Clay, Natural Stone or Concrete Pavers. Guide for the Design of Permeable Pavements Constructed with Concrete Paving Blocks and Flags, Natural Stone Slabs and Setts and Clay Pavers, British Standard Institution, 2009.
8. ABNT NBR 16416, Pervious Concrete Pavement – Requirements and Procedures, ABNT – Associação Brasileira de Normas Técnicas, 2015.
9. The influence of aggregate size and binder material on the properties of pervious concrete10.1155/2014/963971 ↗
10. Study of the pervious concrete properties using the experimental design method10.4028/www.scientific.net/AMR.1089.253 ↗
11. Aggregate effects on pervious Portland cement concrete static modulus of elasticity10.1061/(ASCE)0899-1561(2007)19:7(561) ↗
12. Investigating properties of pervious concrete containing waste tire rubbers10.1016/j.conbuildmat.2014.04.046 ↗
13. Abrasion and freezing-thawing resistance of pervious concrete containing waste rubber10.1016/j.conbuildmat.2014.09.047 ↗
14. Use of washed municipal solid waste incinerator bottom ash in pervious concrete10.1016/j.cemconcomp.2013.01.001 ↗
15. Experimental study on properties of pervious concrete made with recycled aggregate
16. Investigation into laboratory abrasion test methods for pervious concrete10.1061/(ASCE)MT.1943-5533.0000683 ↗
17. Performance comparison of laboratory and field produced pervious concrete mixtures10.1016/j.conbuildmat.2011.03.002 ↗
18. Laboratory evaluation of abrasion resistance of portland cement pervious concrete10.1061/(ASCE)MT.1943-5533.0000210 ↗
19. H. Fujiwara, R. Tomita, T. Okamoto, A. Dozono, A. Obatake, Properties of high-strength porous concrete, ACI SP-179 (1998) 173–188.
20. Laboratory evaluation of permeability and strength of polymer-modified pervious concrete10.1016/j.conbuildmat.2009.10.025 ↗
21. Cement paste characteristics and porous concrete properties10.1016/j.conbuildmat.2006.12.007 ↗
22. Effects of cement paste strength and aggregate size on the compressive strength and void ratio of porous concrete
23. Experimental study on properties of pervious concrete pavement materials10.1016/S0008-8846(02)00966-3 ↗
24. Pervious high-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2011.12.028 ↗
25. Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates10.1016/j.conbuildmat.2015.05.104 ↗
26. Properties of pervious concrete made with electric arc furnace slag and alkali-activated slag cement10.1016/j.conbuildmat.2016.01.049 ↗
27. Hydration mechanism of sulphoaluminate cement10.1007/s11595-014-0869-8 ↗
28. Rheological and hydration characterization of calcium sulfoaluminate cement pastes10.1016/j.cemconcomp.2012.01.008 ↗
29. Influence of the calcium sulphate source on the hydration mechanism of portland cement–calcium sulphoaluminate clinker–calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
30. Microstructure development in mixes of calcium aluminate cement with silica fume or fly ash10.1007/s10973-007-8439-3 ↗
31. Properties of some calcium aluminate cement compositions10.1111/j.1151-2916.1957.tb12595.x ↗
32. Corrosion resistance of calcium aluminate cement concrete exposed to chloride environment10.3390/ma7020887 ↗
33. ASTM C138/C138M-14, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM International, PA, USA, 2014.
34. Japan Concrete Association, Test methods for properties of porous concrete, draft, 1998 (in Japanese).
35. Japan Road Association, Pavement Testing Manual, Supplement volume, 1996, 317 pp (in Japanese).
36. ASTM C39/C39M-14, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, PA, USA, 2014.
37. ASTM C293/C293M-10, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM International, PA, USA, 2010.
38. S. Mindes, J.F. Young, D. Darwin, Concrete, second ed., Pearson Ed. Inc., NJ, USA, 2003.