journal article·2019-02

Destructive and minor destructive tests on masonry buildings: Experimental results and comparison between shear failure criteria

Francesca Ferretti, Barbara Ferracuti, Claudio Mazzotti, Marco Savoia

Publisher page

Abstract

Abstract In this paper, an extensive experimental campaign conducted on existing masonry buildings is presented. The main objective of this activity was to study the shear behaviour of masonries constituted by clay bricks and lime-based mortar evaluating the most suitable techniques applicable to get reliable information on the material mechanical properties. Minor destructive tests (MDT) and destructive tests (DT) were performed on eight masonry buildings, damaged by the 2012 Emilia earthquake (Italy). The tests results are here presented and discussed, focusing on the strength parameters obtainable from each test type and on the definition of appropriate failure domains. The strength predictions are finally compared with the outcomes of full-scale destructive tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Eurocode 8, Design of structures for earthquake resistance. Part 3: Assessment and retrofitting of buildings, 1998.
2. NTC2008, Nuove Norme Tecniche per le Costruzioni, D.M. 14 Gennaio 2008 (in Italian), Rome, 2008.
3. Investigation procedures for the diagnosis of historic masonries10.1016/S0950-0618(00)00018-0 ↗
4. Assessment of seismic vulnerability of a historical masonry building10.3390/buildings2030332 ↗
5. A. Benedetti, L. Pelà, A. Aprile, Masonry properties determination via splitting tests on cores with a rotated mortar layer, in: 8th Int. Semin. Struct. Mason, 2008.
6. The use of small diameter cores for assessing the compressive strength of clay brick masonries10.1016/j.culher.2012.11.027 ↗
7. F. Braga, M. Dolce, A. Masi, Interpretazione statistica di prove sperimentali per l’accertamento della resistenza a taglio della muratura di edifici esistenti (in italian), in: 6° Convegno Naz. – L’ingegneria Sismica Ital., 1993, pp. 577–585.
8. Determination of shear strength of historic masonries by moderately destructive testing of masonry cores10.1016/j.conbuildmat.2013.12.039 ↗
9. Combining Brazilian tests on masonry cores and double punch tests for the mechanical characterization of historical mortars10.1016/j.conbuildmat.2016.02.168 ↗
10. A. Incerti, V. Rinaldini, C. Mazzotti, The evaluation of masonry shear strength by means of different experimental techniques: a comparison between full-scale and laboratory tests, in: 16th Int. Brick Block Mason. Conf., Padova, Italy, 2016, pp. 1645–1652.10.1201/b21889-204 ↗
11. Shear strength of brick masonry walls assembled with different types of mortar10.1016/j.conbuildmat.2012.11.107 ↗
12. The in-plane failure of masonry—a review
13. A. Anthoine, G. Magonette, G. Magenes, Shear-compression testing and analysis of brick masonry walls, in: Geraldduma (Ed.), Proc. 10th Eur. Conf. Earthq. Eng., 1994, pp. 260–277. doi: 10.1111/jcom.12085.10.1111/jcom.12085 ↗
14. D.P. Abrams, Strength behaviour of unreinforced masonry elements, in: Earthq. Eng. 10th World Conf., Balkema, Rotterdam, 1992, pp. 3475–3480.
15. Experimental study on the determination of strength of masonry walls10.1016/S0950-0618(03)00007-2 ↗
16. S. Chiostrini, L. Galano, A. Vignoli, On the determination of strength of ancient masonry walls via experimental tests, in: 12th World Conf. Earthq. Eng., 2000, pp. 1–8. http://www.iitk.ac.in/nicee/wcee/article/2564.pdf.
17. R.H. Atkinson, G.R. Kingsley, S. Sture, A laboratory and in situ study of the shear strength of masonry bed joints, in: Proc. 8th Int. Brick/Block Mason. Conf., 1988, pp. 261–271.
18. ASTM C1531-16, Standard test methods for in situ measurement of masonry mortar joint shear strength index, 2016, pp. 1–7. doi: 10.1520/C1531-16.10.1520/C1531-16 ↗
19. J.L. Noland, G.R. Kingsley, R.H. Atkinson, Utilization of nondestructive techniques into the evaluation of masonry, in: Proc. 8th Int. Brick/Block Mason. Conf., 1988.
20. Determination of strength of mortar in the joints of masonry by compression tests on small specimens
21. UNI EN 772-1, Methods of test for masonry units – Part 1: Determination of compressive strength, 2011.
22. V. Turnsek, F. Cacovic, Some experimental results on the strength of brick masonry walls, in: Proc. 2nd Int. Brick Mason. Conf., Stoke-on-Trent, United Kingdom, 1971.
23. Sulla verifica sismica di costruzioni in muratura (in Italian)
24. W. Mann, H. Muller, Failure of shear-stressed masonry – an enlarged theory, tests and application to shear walls, in: Proc. Int. Syposium Load Bear. Brickwork, London, 1980.
25. Augenti · 2000
26. In-plane strength of unreinforced masonry piers10.1002/eqe.860 ↗
27. In-plane seismic response of brick masonry walls10.1002/(SICI)1096-9845(199711)26:11<1091::AID-EQE693>3.0.CO;2-6 ↗
28. Mechanical characterization of historical masonry by core drilling and testing of cylindrical samples
29. RILEM MS-D6, In Situ Measurement of Masonry Bed Joint Shear Strength, 1996.
30. R. Van der Pluijm, Out-of-plane Bending of Masonry Behaviour and Strength, 1999. doi: 10.6100/IR528212.
31. Modeling masonry shear-compression: role of dilatancy highlighted10.1061/(ASCE)0733-9399(2004)130:11(1289) ↗
32. ASTM E519-15, Standard test method for diagonal tension (shear) in masonry assemblages, 2015, pp. 4–8. doi: 10.1520/E0519.10.1520/E0519 ↗
33. RILEM TC – LUMB6, Diagonal Tensile Strength Tests of Small Wall Specimens, 1991.
34. Shear behavior of unreinforced and reinforced masonry panels subjected to in situ diagonal compression tests10.1016/j.conbuildmat.2011.01.009 ↗
35. Recent advances in photoelasticity
36. A Failure hypothesis for masonry shearwalls10.1061/JSDEAG.0004294 ↗
37. The use of the diagonal compression test to identify the shear mechanical parameters of masonry10.1016/j.conbuildmat.2009.11.001 ↗
38. A. Borri, G. Cangi, A. De Maria, Caratterizzazione meccanica delle murature (anche alla luce del recente sisma in Emilia) e interpretazione delle prove sperimentali a taglio, XV Congr. Naz. “L’ingegneria Sismica Ital., 2013.