journal article·2019-03

Durability properties of multiple-blended binder concretes incorporating thermally activated alum sludge ash

Haider M. Owaid, R. Hamid, M.R. Taha

Publisher page

Abstract

Abstract Binary and ternary blended binder (BBB and TBB, respectively) concretes are prepared by incorporating thermally activated alum sludge ash (AASA), silica fume (SF), ground granulated blast furnace slag (GGBS) and palm oil fuel ash (POFA) as partial cement replacement. Concrete mixtures were prepared with a water/binder ratio and total binder content of 0.30 and 493 kg/m3, respectively. The evaluated durability performances of the multiple blended binder concretes included water absorption, porosity, initial surface absorption, sorptivity and sulfate and chloride resistance (immersed in 5% sodium sulfate (Na2SO4), 5% sodium chloride (NaCl) solutions and water for 90 and 180 days). The results indicated that the BBB with 15% AASA cement replacement demonstrated superior durability performance compared with the control and 20% AASA concretes. A higher replacement level of 20% AASA did not improve inner core durability but improved surface durability characteristics. All TBB concretes performed better than the BBB concretes with AASA at the same replacement levels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Physical and mechanical properties of high performance concrete with alum sludge as partial cement replacement
2. Influence of thermally activated alum sludge ash on the engineering properties of multiple-blended binders concretes
3. Microstructures and bond in cementitious solids
4. G.D. Schutter, K. Audenaert, V. Boel, L. Vandewalle, D. Dupont, G. Heirman, J. Vantomme, J. D’hemricourt, Transport properties in self-compacting concrete and relation with durability, in: Proceedings of the Third International RILEM Symposium, RILEM Proceedings. France, 2003, pp. 799–807.
5. Near surface characteristics of concrete containing supplementary cementing materials10.1016/j.cemconcomp.2003.10.001 ↗
6. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
7. Absorption characteristics of metakaolin concrete10.1016/S0008-8846(03)00188-1 ↗
8. Compressive strength, water absorption, sorptivity, abrasion resistance and permeability of self-compacting concrete containing coal bottom ash10.1016/j.conbuildmat.2013.06.081 ↗
9. Effect of metakaolin and foundry sand on the near surface characteristics of concrete10.1016/j.conbuildmat.2011.03.012 ↗
10. Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash10.1016/j.conbuildmat.2011.12.007 ↗
11. Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar10.1016/j.conbuildmat.2006.10.003 ↗
12. Water sorptivity and chloride diffusivity of oil shale ash concrete10.1016/S0950-0618(98)00006-3 ↗
13. H.M. Amjad, R.S. Salihuddin, Influence of fly ash, GGBF slag and silica fume on porosity and oxygen permeability in high performance concrete, in: Proceedings of the World Engineering Congress, July 19–21, Kuala Lumpur, Malaysia, 1999, pp. 97–102.
14. Neville · 2005
15. Durability of metakaolin concrete to sulfate attack10.1016/j.cemconres.2006.03.026 ↗
16. Effect of silica fume, metakaolin, and low-calcium fly ash on chemical resistance of concrete10.1016/S0008-8846(01)00548-8 ↗
17. Influence of fly ash, silica fume, and slag on sulfate resistance of concrete
18. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate10.1016/S0958-9465(02)00083-5 ↗
19. Anisur R.K.M. Sulfate resistance of concrete containing mineral admixture
20. The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice10.1016/j.conbuildmat.2005.11.005 ↗
21. Evaluation of the sulfate resistance of concrete containing palm oil fuel ash10.1016/j.conbuildmat.2006.07.005 ↗
22. Increasing concrete durability with high-reactivity metakaolin10.1016/S0958-9465(00)00097-4 ↗
23. Durability of self-consolidating concrete incorporating high volume replacement composite cements10.1016/j.cemconres.2004.03.018 ↗
24. ASTM C 150-92, Standard Specification for Portland Cement. Annual Book of ASTM Standard, Vol. 04.02. Philadelphia: America society for Testing and Materials 1992.
25. ASTM C 192/C 192M – 02. Standard practice for making and curing concrete test specimens in the laboratory. West Conshohocken (PA), ASTM International, 2002.
26. ASTM C642. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete1, ASTM C642-97, Annual book of ASTM standard vol. 04.02 1997.
27. Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash10.1016/j.conbuildmat.2006.12.001 ↗
28. Utilization of bagasse ash in high-strength concrete10.1016/j.matdes.2011.07.045 ↗
29. British Standard BS 1881: Part 208, Recommendations For the Determination of the Initial Surface Absorption of Concrete, BSI 1996, London.
30. ASTM C1585, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic- Cement Concretes, ASTM C1585-04, Annual Book of ASTM Standard 2004, West Conshohocken (PA).
31. ASTM C1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution, ASTM C1012-04, Annual Book of ASTM Standard2004, West Conshohocken (PA).
32. Comparing a natural pozzolan, zeolite, to metakaolin and silica fume in terms of their effect on the durability characteristics of concrete: A laboratory study10.1016/j.conbuildmat.2012.11.054 ↗
33. Shetty · 2001
34. Metakaolin and calcined clay as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
35. The effect of mineral admixtures on the properties of high-performance concrete10.1016/S0958-9465(00)00031-7 ↗
36. Near-surface characteristics of concrete: assessment and development of in-situ test methods10.1680/macr.1987.39.141.183 ↗
37. Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes10.1016/S0958-9465(99)00010-4 ↗
38. Development of high performance concrete using silica fume at relatively high water-binder ratios10.1016/S0008-8846(00)00359-8 ↗
39. Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes10.1016/j.conbuildmat.2012.02.017 ↗
40. Influence of metakaolin as supplementary cementing material on strength and durability of concretes10.1016/j.conbuildmat.2011.12.050 ↗
41. Effect of solution concentrations and replacement levels of metakaolin on the resistance of mortars exposed to magnesium sulfate solutions10.1016/j.cemconres.2004.10.035 ↗
42. Performance of volcanic ash and pumice based blended cement concrete in mixed sulfate environment10.1016/j.cemconres.2006.03.010 ↗
43. K.K. Thomas, A.E. Savva, Resistance of fly ash and natural pozzolans blended cement mortars and concrete to carbonation, sulfate attack, and chloride ion penetration, in: Proceedings of the seventh CANMET/ACI international conference on fly ash, silica fume, slag, and natural pozzolan in concrete, Chennai, India, 2001, pp. 276–293.
44. Sulfate resistance of high-performance concrete10.1016/S0958-9465(02)00049-5 ↗
45. Obtaining progressive chloride profiles in cementitious materials10.1016/j.conbuildmat.2005.02.015 ↗