Evaluation of the freeze-thaw durability of surface-treated airport pavement concrete under adverse conditions
Source abstract
Abstract
Abstract In this experimental study, four kinds of conventional concrete surface treatments were selected for evaluation of surface treatment on the freeze-thaw durability of airport pavement concrete under the coupled effect of freeze-thaw cycles, ultraviolet radiation, abrasion, and flame erosion. Relative dynamic elastic modulus and freeze-thaw mass loss ratio were used to characterize the performance of the surface treatments. Experimental results indicated that the freeze-thaw durability of concrete coated with surface treatments improved in comparison with non-coated concrete. The performance difference of the four surface treatments can be expressed in the following order: silane > modified polyurea > AH material > epoxy resin. In order to investigate the influence of surface treatment durability on concrete freeze-thaw durability, scanning electron microscopy (SEM) images were collected. SEM images indicate that: (1) silane has good environment applicability; (2) modified polyurea has good freeze-thaw resistance and is susceptible to high temperature; (3) AH material has excellent high temperature performance and poor freeze-thaw resistance; (4) epoxy resin has poor weathering resistance. Having a better understanding of the properties of each surface treatment increases the successful application of surface treatments in accordance with the demand of airports.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. P.R. Rangaraju, Influence of airfield pavement deicing and anti-icing chemicals on durability of concrete, 2007 FAA Worldwide Airport Technology Transfer Conference: New Directions in Airport Technology, Atlantic City New Jersey, United States, 2007.
2. Hongfa Yu, Haiyan Ma, Kang Bai, Wentao Cao, Peng Zhou, Lijun Han, Freeze-thaw durability of Portland cement concrete subjected to airfield pavement deicer, 1st International conference on microstructure related durability of cementitious composites, Nanjing, China, 2008.
3. Effect of airfield pavement deicer on freeze-thaw durability of high performance concrete
4. Freeze-thaw durability of Portland cement concrete subjected to aircraft deicer10.4028/www.scientific.net/AMR.295-297.1856 ↗
5. Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement10.1016/j.cemconcomp.2011.11.006 ↗
6. Conservation of tuff-stone with polymeric resins10.1016/j.conbuildmat.2006.12.012 ↗
7. Study of the physical-chemical properties of organic coatings for concrete degradation control10.1016/S0950-0618(97)00060-3 ↗
8. Ethyl silicate for surface protection of concrete: performance in comparison with other inorganic surface treatments10.1016/j.cemconcomp.2013.05.008 ↗
9. Concrete surface treatment: effect of exposure temperature on chloride diffusion resistance
10. Hydrophobic treatment of concrete10.1016/S0950-0618(97)00046-9 ↗
11. Influence of ultraviolet radiation and aggressive media on epoxy coating degradation10.1016/S0300-9440(99)00070-3 ↗
12. Surface morphology and chemistry of epoxy-based coatings after exposure to ultraviolet radiation10.1016/j.porgcoat.2012.12.010 ↗
13. A review on surface treatment for concrete-Part 2: Performance10.1016/j.conbuildmat.2016.11.128 ↗
14. Accelerated laboratory evaluation of surface treatments for protecting concrete bridge decks from salt scaling10.1016/j.conbuildmat.2014.01.014 ↗
15. Applying a polyurea coating to high-performance organic cementitious materials10.1016/j.conbuildmat.2012.09.041 ↗
16. Effects of inorganic surface treatment on water permeability of cement-based materials10.1016/j.cemconcomp.2016.01.002 ↗
17. Surface skin protection of concrete with silicate-based impregnations: influence of the substrate roughness and moisture10.1016/j.conbuildmat.2014.07.071 ↗
18. Mehta · 2006 · vol. 3
19. Surface treatments for concrete: assessment methods and reported performance10.1016/S0950-0618(97)00019-6 ↗
20. Study of the physico-chemical properties of organic coatings for concrete degradation control10.1016/S0950-0618(97)00060-3 ↗
21. Corrosion inhibitors in concrete-part I: the principles10.1016/S0008-8846(98)00142-2 ↗
22. Effectiveness of surface coatings in improving concrete durability10.1016/S0958-9465(02)00087-2 ↗
23. Freeze–thaw resistance of concretes treated with pore liners10.1016/j.conbuildmat.2005.06.010 ↗
24. Evaluation of penetrating sealers for reinforced concrete bridge decks10.3141/2108-10 ↗
25. Effect of hydrophobic surface treatment on freeze-thaw durability of concrete10.1016/j.cemconcomp.2016.03.001 ↗
26. Time dependence and service life prediction of chloride resistance of concrete coatings10.1016/j.conbuildmat.2015.03.003 ↗
27. Multi-criteria assessment of an acrylic coating exposed to natural and artificial weathering10.1016/j.proeng.2015.06.197 ↗
28. Comparative evaluation method of polymer surface treatments applied on high performance concrete10.1023/A:1020810113110 ↗
29. GJB 1278A-2009: Specifications for design of cement concrete pavement for military airport.
30. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete10.1016/j.conbuildmat.2013.08.050 ↗
31. ASTM-G154: Standard practice for operating fluorescent light apparatus for UV exposure of nonmetallic materials.
32. ASTM-D5207: Standard practice for confirmation of 20-MM (50-W) and 125-MM (500-W) test flames for small-scale burning tests on plastic materials.
33. GB/T 50082-2009: Standard for test methods of long-term performance and durability of ordinary concrete.
34. Barrier performance of silane–clay nanocomposite coatings on concrete structure10.1016/j.compscitech.2007.10.028 ↗
35. Progress of silane impregnating surface treatment technology of concrete structure
36. A review on concrete surface treatment Part 1: Types and mechanisms10.1016/j.conbuildmat.2016.12.025 ↗
37. Performance characteristics of surface coatings applied to concrete for control of reinforcement corrosion10.1016/S0950-0618(00)00011-8 ↗
38. A comparative study of porous limestones treated with silicon-based strengthening agents10.1016/j.porgcoat.2007.09.020 ↗
39. Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concrete10.1016/j.cemconres.2011.03.011 ↗
40. The effect of a proprietary inorganic coating on compressive strength and carbonation depth of simulated fire-damaged concrete10.1680/macr.12.00119 ↗
41. Blistering and degradation of polyurethane coatings under different accelerated weathering tests10.1016/S0141-3910(02)00085-X ↗
42. Anticorrosive coatings: a review10.1007/s11998-008-9144-2 ↗
43. Degradation study of polymer coating: improvement in coating weatherability testing and coating failure prediction10.1016/j.porgcoat.2008.08.015 ↗