Dynamic response of temperature-seepage-stress coupling in asphalt pavement
Source abstract
Abstract
Abstract Temperature-seepage-stress coupling exists in asphalt pavement and directly affects force and failure mechanisms in the pavement structure. The objective of this paper is to propose a systematic approach to simulate the dynamic characteristics of asphalt pavement, under the combined effects of vehicle dynamic load and environmental factors. In the simulation, the asphalt viscoelastic constitutive equation was established using Burger’s model, to derive the nonlinear control equation of thermal-hydraulic-mechanical coupling of asphalt pavement. Then, a finite element model of asphalt pavement was built using the software ABAQUS. The thermal stress and pore water pressure in pavement structure were analyzed under the condition of rainfall infiltration. Moreover, vertical stress, longitudinal stress, transverse stress and shear stress of different structural layers were analyzed and computed under the multi-field condition. These stresses were then compared to the stresses in the single stress field. The results show that when seepage and temperature are considered, stress change of the subbase is insignificant. However, the transverse stress in the modified fine-grained asphalt concrete layer (AC-1) and the vertical shear stress in the asphalt macadam layer (AM) increased 30% and 53% respectively, compared to the single stress field. This would lead to the occurrence of rutting and cracks in asphalt pavement, which accordingly seriously affects the road performance in hot and rainy weather. The field test was carried out in the DaGuang Highway, and the validity of the simulation model was verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Underground Structures · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Sun · 2005
2. Dynamic response of asphalt pavement considering coupling between fluid flow and stress under moving vehicle loads
3. Field and laboratory investigation of stripping in asphalt pavements
4. Fatigue damage characteristics considering the difference of tensile-compression modulus for asphalt mixture10.1520/JTE20170114 ↗
5. Coupled hydro-mechanical wave propagation in road structures10.1016/j.compstruc.2005.02.012 ↗
6. Development and analysis of premature failures of the asphalt pavements
7. Dynamic behavior of asphalt pavement structure under temperature-stress coupled loading10.1016/j.applthermaleng.2012.10.055 ↗
8. Normalization of fatigue characteristics for asphalt mixtures under different stress states10.1016/j.conbuildmat.2018.05.109 ↗
9. Zhou · 2006
10. Viscoelastic nonlinear multilayered model for asphalt pavement
11. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay
12. Research on pore pressure within asphalt pavement under the coupled moisture-loading action
13. Viscoelastic analysis of saturated asphalt pavement subjected to dynamic load
14. Evaluation of hydroplaning risk of permeable friction course using 3-D grooved tire-water-pavement interaction model
15. Coupled hydro-mechanical response of saturated asphalt pavement under moving traffic load10.1080/10298436.2014.937712 ↗
16. Impact of water on the response and performance of a pavement structure in an accelerated test
17. Modeling of temperature field in flexible pavement10.1007/s40098-014-0122-6 ↗
18. Temperature influence in a dynamic viscoelastic modeling of a pavement structure
19. Experimental and numerical analyses of the thermo-mechanical stability of an embankment with shady and sunny slopes in a permafrost region10.1016/j.applthermaleng.2017.08.074 ↗
20. Action of stress and deformation analysis of asphalt pavement under temperature-stress coupling
21. Xue · 2009
22. Validity of cubic law for fluid flow in deformable rock fracture
23. A finite element method for coupled stress and fluid flow analysis in fractured rock masses10.1016/0148-9062(82)90888-9 ↗
24. Strength, deformation and conductivity coupling of rock joints10.1016/0148-9062(85)93227-9 ↗
25. DCOVALEX-an international co-operative research project on mathematical models of coupled THM processes for safety analysis of radioactive waste repositories10.1016/0148-9062(95)00031-B ↗
26. A numerical study of thermal-hydraulic-mechanical simulation with application of thermal recovery in fractured shale-gas reservoirs10.2118/183637-PA ↗
27. Elastoplastic finite element analysis for influences of pressure solution on thermo-hydro-mechanical coupling in aggregate rock
28. Thermal-hydraulic-mechanical-chemical coupling with damage mechanics using ESCRIPTPT and ABAQUS10.1016/j.tecto.2011.12.005 ↗
29. Comparative modelling of the coupled thermal-hydraulic-mechanical(THM) processes in a heated bentonite pellet column with hydration10.1007/s12665-018-7255-3 ↗
30. Liu · 2007
31. Solution of stochastic partial differential equations using Galerkin finite element techniques10.1016/S0045-7825(01)00237-7 ↗
32. Wang · 2009
33. Determining burger's model parameters of asphalt materials using creep-recovery testing data
34. Connections between chemical composition and rheology of aged base asphalt binders during repeated freeze-thaw cycles10.1016/j.conbuildmat.2017.10.097 ↗
35. Monitoring the Mechanical and structure behavior of pavement structure using electronic sensors10.1111/mice.12104 ↗