journal article·2019-08

Sub-surface simulated damage detection using Non-Destructive Testing Techniques in reinforced-concrete slabs

Harsh Rathod, Rishi Gupta

Publisher page

Abstract

Abstract Most commonly occurring defects in RC (Reinforced Concrete) bridge decks include voids, spalling, corrosion of reinforcement, leaching, scaling, cracking, honeycombing and delamination/debonding. Research related to the use of different NDTs (Non-Destructive Testing) techniques to locate and identify different defects and its severity have been conducted in the past. Previous research work indicates that no particular technique is complete and each has its own advantages and limitations. This paper discusses the error values in identification of the damage in reinforced concrete using NDTs. This research uses a total of five NDTs and their combination to detect the defects. For this, a total of nine 1800 mm × 460 mm reinforced concrete slabs with varying thicknesses of 100 mm, 150 mm and 200 mm have been prepared. These slabs have been embedded with artificial defects like voids, debonding, honeycombing, and corrosion. The experimental research shows that combining multiple techniques together in evaluating the defects give significantly lower error and higher accuracy compared to that from a standalone test. Combination of multiple techniques such as stress wave, electromagnetic wave, infrared thermography and other electrochemical methods have been used for damage detection in reinforced-concrete slabs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Halsall · Can. Infrastructure Rep Card · 2016
2. AASHTO Guide Manual for Bridge Element Inspection, American Association of State Highway and Transportation Officials, Washington DC, First Edition, 2011.
3. Structural assessment of masonry arch bridges by combination of non-destructive testing techniques and three-dimensional numerical modelling: Application to Vilanova bridge10.1016/j.engstruct.2017.07.011 ↗
4. D. Breysse, “Non-Destructive Assessment of Concrete Structures: Reliability and Limits of Single and Combined Techniques”, State-of-the-Art Report of the RILEM Technical Committee 207-INR, 2012 DOI: 10.1007/978-94-007-2736-6.10.1007/978-94-007-2736-6 ↗
5. 228.2R Report on Non-destructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, 2013.
6. Pavement drainage pipe condition assessment by GPR image reconstruction using FDTD modelling10.1016/j.conbuildmat.2017.06.103 ↗
7. Location of buried plastic pipes using multi-agent support based on GPR images10.1016/j.jappgeo.2011.09.024 ↗
8. Application of radar techniques to the verification of design plans and the detection of defects in concrete bridges10.1080/15732470701778506 ↗
9. Benedetto · Civil Eng. Appl. Ground Penet. Radar · 201510.1007/978-3-319-04813-0 ↗
10. ASTM D4788–03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography, ASTM International, West 2013 Conshohocken, PA www.astm.org.
11. Application of infrared thermography to the non-destructive testing of concrete and masonry bridges10.1016/S0963-8695(02)00060-9 ↗
12. Effects of environmental variables on infrared imaging of subsurface features of concrete bridges10.3141/2108-12 ↗
13. Defect detection in concrete structures using thermal imaging techniques10.1111/j.1747-1567.2010.00658.x ↗
14. Detection of common defects in concrete bridge decks using non-destructive evaluation techniques10.1061/(ASCE)1084-0702(2007)12:2(215) ↗
15. TP 95-11 - Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration. (2013). In Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards, 2013 Edition (p. 1). American Association of State Highway and Transportation Officials (AASHTO).
16. ASTM C1202–12, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, ASTM International, West 2012 Conshohocken, PA www.astm.org.
17. Modification of four point method to measure the concrete electrical resistivity in presence of reinforcing bars10.1016/j.cemconcomp.2014.07.013 ↗
18. Test methods for on site measurement of resistivity of concrete — a RILEM TC-154 technical recommendation10.1016/S0950-0618(00)00061-1 ↗
19. Use of electrical resistivity as an indicator for durability10.1016/j.conbuildmat.2014.09.077 ↗
20. Lataste · 2013 · 255
21. A new standing-wave testing system for bridge structure nondestructive damage detection using electromagnetic wave10.1002/tee.22048 ↗
22. A new guided wave–based technique for corrosion monitoring in reinforced concrete10.1177/1475921712462938 ↗
23. ASTM C597-16 Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West 2016 Conshohocken, PA 10.1520/C0597-16.
24. Predicting concrete compressive strength using ultrasonic pulse velocity and rebound number
25. An ultrasonic method of studying deterioration and cracking in concrete structures
26. Concrete quality designation based on ultrasonic pulse velocity10.1016/j.conbuildmat.2016.08.158 ↗
27. Detection of delamination in concrete using ultrasonic pulse velocity test10.1016/j.conbuildmat.2011.06.060 ↗
28. ASTM C876-15 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, ASTM International, West 2015 Conshohocken, PA 10.1520/C0876-15
29. RILEM technical committees RILEM TC 154-EMC: “electrochemical techniques for measuring metallic corrosion’ recommendations”10.1007/BF02481526 ↗
30. Factors influencing half-cell potential measurement and its relationship with corrosion level10.1016/j.measurement.2017.03.027 ↗
31. Electrical resistivity of concrete for durability evaluation: a review10.1155/2017/8453095 ↗
32. Harsh Rathod and Rishi Gupta, “2-Dimensional Non-Destructive Testing data maps for Reinforced Concrete slabs with simulated damage”, Construction and Building Materials Data in Brief (DiB) “Submitted” http://ees.elsevier.com/conbuildmat/download.aspx?id=1225111&guid=ac12a182-8a84-4372-a39c-7d92036a4a7d&scheme=1