journal article·2019-10

Health monitoring of reinforced concrete structures under impact using multiple piezo-based configurations

Prateek Negi, Rajat Chhabra, Naveet Kaur, Suresh Bhalla

Publisher page

Abstract

Abstract With new advancements in construction technologies, the researchers and engineers have started taking a greater interest in structural health monitoring (SHM). Some of these techniques involve monitoring of structures using piezo sensors, made of smart materials such as Lead Zirconate Titanate (PZT) in form of thin patches. One of such techniques which has shown promising results in detecting damage at incipient stages is the electro-mechanical impedance (EMI) technique. In this study, damages incurred due to impact loading on reinforced concrete (RC) slabs were studied using four types of piezo-based configurations, namely concrete vibration sensor (CVS) with circular PZT patch (CVS-C), CVS with square PZT patch (CVS-S), resin jacketed piezo (RJP) sensor with a single layer of epoxy (RJP-I) and RJP with double layer of epoxy (RJP-II). The tests showed a successful detection of damage due to impacts by all the four types of piezo-based configurations. The CVS-C and RJP-I proved to be more sensitive in quantifying damage via root mean square deviation (RMSD) variation, i.e. increasing RMSD values with an increase in the number of impacts. In addition, CVS-C, CVS-S, and RJP-II, specifically detected an imminent failure in one of the RC slabs. The equivalent structural parameters computed from the admittance signatures showed a reduction in the equivalent stiffness with the incremental damage. An empirical model was successfully developed for each of the sensors to determine the remaining life of the structure based on a non-dimensional stiffness loss factor. The equivalent stiffness-based model was found to be an improvement over the previous damping-based models which can be reliably used in the field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Impact testing of concrete using a drop-weight impact machine10.1007/BF02327783 ↗
2. Structural health monitoring by piezo-impedance transducers. II: application10.1061/(ASCE)0893-1321(2004)17:4(166) ↗
3. Prognosis of low-strain fatigue induced damage in reinforced concrete structures using embedded piezo-transducers10.1016/j.ijfatigue.2018.04.002 ↗
4. Bhalla · 2016
5. Piezo-impedance transducers for residual fatigue life assessment of bolted steel joints10.1177/1475921712458708 ↗
6. Impact behaviour of plain concrete loaded in uniaxial compression
7. Central electronics limited (2018), http://www.celindia.co.in/drupal7/ (Date of access: 24th Feb 2018)
8. Prognosis of fatigue and impact induced damage in concrete using embedded piezo-transducers10.1016/j.sna.2018.03.005 ↗
9. Theoretical and experimental assessment of parameters for the non-linear viscoelastic model of structural pounding
10. Kessler · 2002
11. Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer10.1177/1045389X9400500102 ↗
12. Strain monitoring for a bending concrete beam by using piezoresistive cement-based sensors10.1016/j.conbuildmat.2018.02.048 ↗
13. Concrete damage diagnosis using electromechanical impedance technique10.1016/j.conbuildmat.2016.12.173 ↗
14. A novel electromechanical impedance–based model for strength development monitoring of cementitious materials10.1177/1475921717725028 ↗
15. Empirircal relationship between the impact energy and compressive strength for fiber reinforcrd concrete
16. Embedded PZT sensor for monitoring mechanical impedance of hydrating cementitious materials10.1007/s10921-017-0442-4 ↗
17. EMI effectiveness investigation on embedded PZT patches at varying orientations for monitoring concrete hydration10.1016/j.conbuildmat.2018.03.006 ↗
18. Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patches10.1016/j.conbuildmat.2008.02.017 ↗
19. Smart aggregates: multi-functional sensors for concrete structures–a tutorial10.1088/0964-1726/17/3/033001 ↗
20. Monitoring the strength development in concrete by EMI sensing technique10.1016/j.conbuildmat.2010.02.014 ↗
21. Monitoring of the strength gain of concrete using embedded PZT impedance transducer10.1016/j.conbuildmat.2011.04.020 ↗
22. Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: I. Experiment
23. Piezoresistive behavior of CF- and CNT-based reinforced concrete beams subjected to static flexural loading: Shear failure investigation10.1016/j.conbuildmat.2018.02.124 ↗