Critical region method-based fatigue life prediction of notched steel wires of long-span bridges
Source abstract
Abstract
Abstract Huge uncertainty exists in the corrosion process, and the dimensions of corrosion pits are quite random in practical engineering. Corrosion pit-induced stress concentration accelerates the initiation of fatigue cracks, ultimately reducing the fatigue life of bridge sling. This paper proposes a critical region method to predict the fatigue life of notched steel wires. This method considers the critical distance and the average stress amplitude of notched specimen. Fatigue loading tests on various notched steel wires are performed to simulate the effects of corrosion pit morphologies on the performance of steel wires. The relationships between notch dimensions and the fatigue lives of specimens are discussed. Following that, a fine-mesh three-dimensional solid model of notched steel wire is established by finite element method. The stress concentration coefficients and the stress distribution near the notch root are investigated, and the critical distance is also determined according to the local stress gradient of notched steel wire. The critical region-based fatigue life prediction method is validated using experimental fatigue life results of notched steel wires. A good agreement is observed between the theoretical predictions and experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Fatigue and fracture mechanics · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Experimental study on fatigue performance of corroded high-strength steel wires used in bridges10.1016/j.conbuildmat.2018.07.249 ↗
2. Fatigue properties assessment of corroded cable10.4028/www.scientific.net/KEM.413-414.757 ↗
3. Corrosion mechanism and protection methods for suspension bridge cables10.2749/101686600780481518 ↗
4. Fatigue life prediction for aging RC beams considering corrosive environments10.1016/j.engstruct.2014.07.039 ↗
5. Experimental and modelling of the flexural performance degradation of corroded RC beams under fatigue load10.1016/j.conbuildmat.2018.10.031 ↗
6. Fatigue fracture surface analysis and fatigue life estimation of corroded steel wires
7. Quantitative correlation between geometric parameters and stress concentration of corrosion pits10.1016/j.engfailanal.2014.05.020 ↗
8. An extended engineering critical assessment for corrosion fatigue of subsea pipeline steels10.1016/j.engfailanal.2017.11.012 ↗
9. Corrosion fatigue life prediction of a steel shaft material in seawater10.1016/j.engfailanal.2013.08.004 ↗
10. Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue10.1016/j.conbuildmat.2006.07.008 ↗
11. Concrete cracking prediction under combined prestress and strand corrosion10.1080/15732479.2018.1550519 ↗
12. Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosion10.1016/j.corsci.2013.03.037 ↗
13. Degradation relationships for the mechanical properties of corroded steel rebars10.1016/j.conbuildmat.2017.04.209 ↗
14. Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete10.1016/j.conbuildmat.2017.06.169 ↗
15. A continuum damage mechanics approach coupled with an improved pit evolution model for the corrosion fatigue of aluminum alloy10.1016/j.corsci.2016.10.006 ↗
16. Tensile and fatigue behavior of corroded rebars10.1016/j.conbuildmat.2012.02.071 ↗
17. Nonlinear cyclic response of corrosion-damaged reinforcing bars with the effect of buckling10.1016/j.conbuildmat.2012.12.011 ↗
18. Test method for corrosion pit-to-fatigue crack transition from a corner of hole in 7075–T651 aluminum alloy10.1016/j.ijfatigue.2016.05.021 ↗
19. Prior corrosion and fatigue of 2024–T3 aluminum alloy10.1016/j.corsci.2005.11.008 ↗
20. Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ – ε behavior10.1016/j.conbuildmat.2015.10.139 ↗
21. Mechanical model to evaluate steel reinforcement corrosion effects on σ – ε and fatigue curves. Experimental calibration and validation10.1016/j.engstruct.2016.03.055 ↗
22. Effect of reinforcement corrosion on reliability of highway bridges10.1016/S0141-0296(97)00197-1 ↗
23. Numerical investigation on stress concentration of corrosion pit10.1016/j.engfailanal.2009.04.004 ↗
24. Experimental study on fatigue strength of corroded bridge wires10.1061/(ASCE)BE.1943-5592.0000366 ↗
25. Static and fatigue behavior investigation of artificial notched steel reinforcement10.3390/ma10050532 ↗
26. Specimen length effect on parameter estimation in modelling fatigue strength by Weibull distribution10.1016/j.ijfatigue.2005.11.006 ↗
27. Aspects of parallel wire cable reliability10.1016/S0167-4730(02)00057-7 ↗
28. Fatigue life prediction for parallel-wire stay cables considering corrosion effects
29. Anisotropic fatigue & fracture behaviour in hot-rolled and cold-drawn pearlitic steel wires10.4028/www.scientific.net/KEM.713.103 ↗
30. Investigation into corrosion pit-to-fatigue crack transition in 7075–T6 aluminum alloy
31. Effects of stress ratio and banded microstructure on fatigue crack growth behavior of HRB400 steel bar10.1061/(ASCE)MT.1943-5533.0002193 ↗
32. Equivalent surface defect model for fatigue life prediction of steel reinforcing bars with pitting corrosion10.1016/j.ijfatigue.2018.01.019 ↗
33. Prediction of fatigue failure location on a component using a critical distance method10.1016/S0142-1123(00)00062-1 ↗
34. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
35. The theory of critical distances: a review of its applications in fatigue10.1016/j.engfracmech.2006.12.004 ↗
36. On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti–6Al–4V10.1016/j.ijfatigue.2004.06.002 ↗
37. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
38. Behavior of short fatigue crack at notch root10.4028/www.scientific.net/KEM.465.515 ↗
39. Mechanical properties and remaining strength of corroded bridge wires10.2749/101686604777964305 ↗
40. Investigation on fatigue reliability of high strength galvanized steel wires
41. Limit equilibrium method-based shear strength prediction for corroded reinforced concrete beam with inclined bars10.3390/ma12071014 ↗
42. Chloride-induced corrosion of steel reinforcement–Mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
43. Probabilistic prediction with Bayesian updating for strength degradation of RC bridge beams10.1016/j.strusafe.2013.07.006 ↗
44. Bridge remaining strength prediction integrated with Bayesian Network and in situ load testing10.1061/(ASCE)BE.1943-5592.0000611 ↗
45. A generic statistical methodology to predict the maximum pit depth of a localized corrosion process10.1016/j.corsci.2011.03.026 ↗
46. Corrosion pit growth on austenitic stainless steels in chloride containing solution: a quantitative approach10.1108/00035591211265550 ↗
47. GB-T17101-2008, Hot-dip galvanized steel wires for bridge cables, (2008).
48. Fatigue crack growth behavior of cables and steel wires for the cable-stayed portion of Runyang bridge: disproportionate loosening and/or tightening of cables10.1016/j.tafmec.2007.10.008 ↗
49. Correlation between the geometric parameters of corrosion pit and stress concentration Factor10.4028/www.scientific.net/AMM.327.156 ↗
50. Fatigue life assessment of large scale T-jointed steel truss bridge components10.1016/j.jcsr.2017.01.008 ↗