Genetic programming based formulation for compressive and flexural strength of cement mortar containing nano and micro silica after freeze and thaw cycles
Source abstract
Abstract
Abstract Replacing cement with supplementary cementitious materials such as nano and micro-silica would improve the mechanical properties including compressive strength (Fc) and flexural strength (Ff). Also, the frost resistance of the cement mortar as adding micro and nano-silica reduces its porosity. The purpose of this investigation is to evaluating the capability of Genetic Expression Programming (GEP) to predict and formulate the hardened characteristics of cement mortar with the simultaneous addition of nano and micro-silica by considering the freeze-thaw (F-T) cycles based on experimental data. 32 mix designs were prepared with 0.4 and 0.5 water/binder ratios, 990–1200 gr of cement content, 2.667–3.222 of sand/cement ratio, 0 to 0.051 of nano-silica/cement ratio, and 0–0.157 of micro-silica/cement ratio. The parameters modeled by GEP were porosity, Fc, and Ff by considering the F-T cycles. The results obtained from the experimental program of this study were used as input dataset for the proposed GEP models. The correlation between GEP and the experimental results was evaluated and a small dispersion was observed. The results showed the power and robustness of the GEP tool for modeling the hardened characteristics of the cement mortar comprising nano and micro-silica. It also produced a formulation to predict these properties as a function of the mixture components. Finally, a sensitivity analysis was performed and the contribution of the predictor variables on the variation of the Fc and Ff was evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effects of the addition of silica fume and rubber particles on the compressive behaviour of recycled aggregate concrete with steel fibres10.1016/j.jclepro.2018.06.237 ↗
2. Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar10.1016/j.conbuildmat.2017.02.115 ↗
3. ANN prediction of cement mortar compressive strength, influence of cement strength class10.1016/j.conbuildmat.2017.01.132 ↗
4. Effects of chemical composition of fly ash on compressive strength of fly ash cement mortar10.1016/j.conbuildmat.2019.01.208 ↗
5. Predicting the mechanical properties of ordinary concrete and nano-silica concrete using micromechanical methods
6. Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point10.1016/j.conbuildmat.2014.07.089 ↗
7. Effect of using different types of nano materials on mechanical properties of high strength concrete10.1016/j.conbuildmat.2014.12.075 ↗
8. Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by multi-objective ANN modeling10.1016/j.conbuildmat.2019.03.243 ↗
9. Combined usage of micro-silica and nano-silica in concrete: SP demand, cementing efficiencies and synergistic effect10.1016/j.conbuildmat.2018.02.181 ↗
10. Simultaneous effects of microsilica and nanosilica on self-consolidating concrete in a sulfuric acid medium10.1016/j.conbuildmat.2017.06.165 ↗
11. Chloride penetration, water absorption and electrical resistivity of high performance concrete containing nano silica and silica fume
12. Synergistic influence of micro-nano silica mixture on durability performance of cementious materials10.1016/j.conbuildmat.2018.01.013 ↗
13. Combined effects of micro-silica and nano-silica on durability of mortar10.1016/j.conbuildmat.2017.09.105 ↗
14. A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: mechanism perspective10.1016/j.conbuildmat.2018.08.029 ↗
15. Genetic prediction of cement mortar mechanical properties with different cement strength class after freezing and thawing cycles10.1002/suco.201700196 ↗
16. Effect of freeze – thaw cycles on the physicomechanical properties of a pozzolanic mortar10.1016/j.conbuildmat.2016.12.131 ↗
17. Damage and damage resistance of high strength concrete under the action of load and freeze-thaw cycles10.1016/S0008-8846(99)00097-6 ↗
18. Effects of freezing and thawing on the tension properties of high-strength concrete
19. Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes10.1016/j.carbon.2014.12.094 ↗
20. A review for characterization of silica fume and its effects on concrete properties
21. Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by ANN and GEP10.1016/j.conbuildmat.2019.05.092 ↗
22. Freeze-thaw durability of air-entrained CSF concrete10.1016/0958-9465(91)90021-9 ↗
23. Investigation on the mechanical properties of a cement-based material containing carbon nanotube under drying and freeze-thaw conditions10.3390/ma8125491 ↗
24. Influence of nano- and micro-silica additions on the durability of a high-performance self-compacting concrete10.1016/j.conbuildmat.2017.12.100 ↗
25. Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method10.1016/j.conbuildmat.2018.11.265 ↗
26. ANN and GEP prediction for simultaneous effect of nano and micro silica on the compressive and flexural strength of cement mortar10.1016/j.conbuildmat.2018.09.031 ↗
27. A new predictive model for compressive strength of HPC using gene expression programming10.1016/j.advengsoft.2011.09.014 ↗
28. Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP10.1016/j.eswa.2013.04.014 ↗
29. ASTM C150, Standard Specification for Portland Cement, Annu. B. ASTM Stand., 2011. https://doi.org/10.1002/jbm.b.31853.10.1002/jbm.b.31853 ↗
30. ASTM, Standard Specification for Silica Fume Used in Cementitious Mixtures, Astm C1240, 2012. https://doi.org/10.1520/C1240-14.2.
31. ASTM, Standard specification for standard sand, C778-13, 2013.
32. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
33. Rheological performance and compressive strength of superplasticized cementitious mixtures with micro/nano-SiO 2 additions10.1016/j.conbuildmat.2012.12.025 ↗
34. ASTM C348, Flexural strength of hydraulic-cement mortars, ASTM Int., 2002.
35. ASTM, ASTM C349. Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), Annu. B. ASTM Stand, 2008. https://doi.org/10.1520/C0349-08.2.
36. ASTM C666, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2015.
37. Genetic algorithms10.1038/scientificamerican0792-66 ↗
38. Koza · 1992
39. C. Ferreira, Gene expression programming: a new adaptive algorithm for solving problems, ArXiv Prepr. Cs/0102027, 2001.
40. Genetic programming based formulation for fresh and hardened properties of self-compacting concrete containing pulverised fuel ash10.1016/j.conbuildmat.2009.02.012 ↗
41. Gene expression programming in problem solving
42. Nonlinear genetic-based models for prediction of flow number of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000154 ↗
43. Probability and statistics in civil engineering
44. Frank · 1994
45. A. Golbraikh, A. Tropsha, Beware of q2!, in: J. Mol. Graph. Model, 2002. https://doi.org/10.1016/S1093-3263(01)00123-1.10.1016/S1093-3263(01)00123-1 ↗
46. On some aspects of variable selection for partial least squares regression models10.1002/qsar.200710043 ↗