journal article·2020-05

Replacing fly ash with limestone dust in hybrid cements

G. Millán-Corrales, J.R. González-López, A. Palomo, A. Fernandez-Jiménez

Publisher page

Abstract

This study explored the effect of adding 10% of finely ground limestone dust to alkaline hybrid cements. A series of binders was prepared with 20–30% OPC (CEM I 52.5R) and fly ash in the presence or absence of a chemical activator (5% Na2SO4). The rate of heat release was determined by isothermal conduction calorimetry. Setting times and 3 d, 28 d and 90 d compressive strength were likewise found. The reaction products were characterised by XRD, DTA/TG and BSEM/EDX. The inclusion of 10% of limestone in the hybrid cements to replace the fly ash improved compressive strength and hastened hydration. The 28 d pastes containing 30% OPC, 10% limestone, 55% FA and 5% Na2SO4 developed compressive strength above 45 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Cements in the 21st century: challenges, perspectives, and opportunities10.1111/jace.14948 ↗
2. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
3. Alternative cement clinkers10.1016/j.cemconres.2017.02.002 ↗
4. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
5. Efficient utilization of cementitious materials to produce sustainable blended cement10.1016/j.cemconcomp.2012.02.004 ↗
6. Industrial trial to produce a low clinker, low carbon cement10.3989/mc.2015.00614 ↗
7. Reducing environmental impacts and carbon emissions: study of effects of superfine cement particles on blended cement containing high volume mineral admixtures10.1016/j.jclepro.2018.06.079 ↗
8. EN 197-1 Cement – Part 1: Composition, specifications and conformity criteria for common cements.
9. https://cembureau.eu/media/1501/cembureau_cementslowcarboneurope.pdf.
10. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
11. Calcined clay limestone cements (LC3)10.1016/j.cemconres.2017.08.017 ↗
12. Elucidating the role of the aluminous source on limestone reactivity in cementitios materials10.1111/jace.13806 ↗
13. Physical performances of alkali-activated Portland cement-glass-limestone blends10.1111/jace.14955 ↗
14. Packing density modeling of blended cement with limestone having different particle sizes10.1016/j.conbuildmat.2015.09.063 ↗
15. The influence of limestone and Al2O3 content in the slag on the performance of the composite cements10.1016/j.proeng.2015.06.164 ↗
16. Hydration of C3A in the presence of Ca(OH)2, CaSO4.2H2O and CaCO310.1016/0008-8846(91)90183-I ↗
17. Studies on the carboaluminate formation in limestone filler blended cements10.1016/S0008-8846(01)00491-4 ↗
18. Properties and behavior of limestone cement concrete and mortar10.1016/S0008-8846(00)00372-0 ↗
19. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
20. Effects of Portland cement replacement with limestone on the properties of hardened concrete10.1016/j.cemconcomp.2013.10.016 ↗
21. Lothenbach B., Influence of limestone and anhydrite on the hydration of Portland cements10.1016/j.cemconcomp.2013.11.007 ↗
22. Influence of initial curing on the properties of concrete containing limestone blended cement10.1016/S0008-8846(00)00217-9 ↗
23. Effects of the fineness of limestone poder and cement on the hydration and strength decelopment of PLC concrete10.1016/j.conbuildmat.2016.12.189 ↗
24. A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures10.1016/j.conbuildmat.2018.06.075 ↗
25. Effect of macro-, micro- and nano-calcium carbonate on properties of cementitious composites—A review10.3390/ma12050781 ↗
26. X. Xiong, B. Van, Hydration processes of cements blended with limestone powder: Experimental study and numerical simulation, in Cement’s Contribution to the Development in the 21st Century, in: Proceedings of the 11th International Congress on the Chemistry of Cement (ICCC) 11–16 May 2003, Durban, South Africa, pp. 1983–1992.
27. Strength development of ternary blended cement with limestone filler and blast-furnace slag10.1016/S0958-9465(01)00056-7 ↗
28. Synergy between fly ash limestone powder in ternary cements10.1016/j.cemconcomp.2010.09.006 ↗
29. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗
30. Assessment of pore estructure evolution in the limestone calcined clay cementitious system and its implications for performance10.1016/j.cemconcomp.2017.08.012 ↗
31. Physical performances of blended cements containing calcium aluminosilicate glass poder and limestone10.1016/j.cemconres.2010.12.005 ↗
32. Variation in hybrid cements over time. Alkaline activation of fly ash-portland cement blends10.1016/j.cemconres.2013.03.022 ↗
33. Hybrid alkaline cements: Bentonite-OPC binders10.3390/min8040137 ↗
34. Fundamental properties of industrial hybrid cement: utilization in ready-mixed concretes and shcrinkage-reducing applications10.3989/mc.2016.04615 ↗
35. Chemical activation of hybrid binders based on siliceous fly ash and Portland cement10.1016/j.cemconcomp.2015.11.003 ↗
36. Hydration mechanisms of hybrid cements as a function of the way of addition of chemicals10.1111/jace.15939 ↗
37. Hydration of hybrid alkaline cement containing a very large proportion of fly ash: a descriptive model10.3390/ma9070605 ↗
38. An overview and experimental study on hybrid binders containing date palm ash, fly ash, OPC and activator composites10.1016/j.conbuildmat.2017.11.017 ↗
39. Natural volcanic pozzolans as an available raw material for alkali-activated materials in the foreseeable future: A review10.1016/j.conbuildmat.2018.08.174 ↗
40. ASTM C187 Normal consistency of Hydraulic Cement.
41. ASTM C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle.
42. ASTM C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry.
43. Fine limestone additions to regulate setting in high volume fly ash mixtures10.1016/j.cemconcomp.2011.09.004 ↗
44. Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder10.1016/j.cemconcomp.2014.10.001 ↗
45. Calorimetric study on the influence of calcium sulfate on the hydration of Portland cement-calcium aluminate cement mixtures10.1007/s10973-011-1920-z ↗
46. Hydration of cement and its mechanisms
47. Limestone addition effects on concrete porosity10.1016/j.cemconcomp.2016.06.006 ↗
48. Effect of a high calcite filler addition upon microstructural, mechanical, shrinkage and transport properties of a mortar10.1016/j.cemconres.2008.02.007 ↗
49. Phase evolution of C-(N)-A-S-H/N-A-S-H gel blends investigated via alkali-activation of synthetic calcium aluminosilicate precursors10.1016/j.cemconres.2016.08.010 ↗
50. Use of high-resolution thermogravimetric analysis (HRTG) technique in spent FCC catalyst/Portland cement pastes10.1007/s10973-015-4526-z ↗
51. K. Scrivener, R. Snellings, B. Lothenbach, A practical guide to Micostructural Analysis of Cementitious Materials, Book Ed. Taylor & Francis Group, 2016 Chaper 5.
52. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗