Investigation into the effect of fibre distribution on the post-cracking tensile strength of SFRC through physical experimentation and numerical simulation
Source abstract
Abstract
Abstract Steel Fibre Reinforced Concrete (SFRC) is a two-phase heterogeneous material that is composed of steel fibres and a concrete matrix, whose specimen toughness, residual strength, and impact resistance is dependent on the distribution of steel fibres within the concrete matrix. Thus, this paper has elected to study the effects of fibre distribution on the post-cracking tensile strength of cubic SFRC specimens at the mesoscopic level using physical experiments and numerical simulations. The first step of analyzing the effects of fibre distribution must invariably be the determination of fibre distribution itself; therefore, inductive tests were conducted to determine the distribution of fibres in cubic SFRC specimens of varying fibre contents. A three-dimensional steel fibre distribution model was generated in MATLAB according to the steel fibre distribution that was obtained from the inductive tests. Physical multi-axial cube splitting tests (MCST tests) were carried out on all cubic SFRC specimens to study the effects of fibre content and orientation on the post-cracking tensile strength of SFRC. Afterwards, the three-dimensional steel fibre distribution model was imported from MATLAB into ABAQUS, a finite element software, to establish the SFRC mesoscale model, wherein the assignment and calibration of model parameters were based on the results of the MCST tests. Finally, simulated MCST tests were carried out using the mesoscale SFRC models. Comparative analyses between the mesoscale SFRC numerical simulation results and the experimental results show that both agree well with each other, which verifies the validity of the numerical model. This paper’s verified model has a broad range of applications, which include a variety of scenarios that range from simple mechanical tests to complex steel fibre reinforced concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Fibre reinforced concrete: new design perspectives10.1617/s11527-009-9529-4 ↗
2. Experimental and analytical study of concrete blocks subjected to concentrated loads with an application to TBM-constructed tunnels10.1016/j.tust.2015.04.020 ↗
3. High performance fibre reinforced concrete: progress in knowledge and design codes10.1617/s11527-009-9538-3 ↗
4. Blanco · 2013
5. Tensile modeling of steel fiber reinforced concrete10.1007/s42107-018-00104-y ↗
6. Constitutive modeling of steel fiber-reinforced concrete
7. A new constitutive model for steel fibre reinforced concrete subjected to dynamic loads10.1016/j.compstruct.2019.04.021 ↗
8. Experimental and numerical analysis on effect of fibre aspect ratio on mechanical properties of SRFC10.1016/j.conbuildmat.2009.09.009 ↗
9. Cao · 2011
10. Wang · 2017
11. FEA modelling of fracture toughness of steel fibre-reinforced geopolymer composites10.1016/j.matdes.2015.03.029 ↗
12. An efficient method to derive statistical mechanical properties of concrete reinforced with spiral-shaped steel fibres in dynamic tension10.1016/j.conbuildmat.2016.07.140 ↗
13. Three-dimensional modelling of steel fibre reinforced concrete material under intense dynamic loading10.1016/j.conbuildmat.2013.02.067 ↗
14. Evaluation of elastic properties of fibre reinforced concrete with homogenization theory and finite element simulation10.1016/j.conbuildmat.2018.12.134 ↗
15. Effects of the fibre orientation and fibre aspect ratio on the tensile strength of Csf/Mg composites10.1016/j.commatsci.2014.03.004 ↗
16. Mesoscale analysis on ultra-high performance steel fibre reinforced concrete slabs under contact explosions10.1016/j.compstruct.2019.111322 ↗
17. Effects of fiber orientation and content on the static and fatigue behavior of SFRC by using CT-Scan technology10.1016/j.ijfatigue.2019.06.038 ↗
18. Mesoscale modelling of fibre reinforced concrete material under compressive impact loading10.1016/j.conbuildmat.2011.06.022 ↗
19. Mesoscale modelling of dynamic tensile behaviour of fibre reinforced concrete with spiral fibres10.1016/j.matdes.2012.05.047 ↗
20. Simple tools for fibre orientation prediction in industrial practice10.1016/j.cemconres.2011.05.008 ↗
21. Influence of formwork surface on the orientation of steel fibres within self-compacting concrete and on the mechanical properties of casting structural element10.1016/j.cemconcomp.2013.12.002 ↗
22. Distribution of steel fibres in rectangle sections10.1016/j.cemconcomp.2004.03.005 ↗
23. Mechanical properties of high-strength steel fibre-reinforced concrete10.1016/j.conbuildmat.2004.04.027 ↗
24. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
25. Effect of fibre dispersion on multiple cracking of cement composites
26. Correlation of fibre dispersion, rheology and mechanical performance of FRCs10.1016/j.cemconcomp.2006.08.006 ↗
27. Multidirectional double punch test to assess the post-cracking behaviour and fibre orientation of FRC10.1016/j.conbuildmat.2014.02.023 ↗
28. Fibre distribution in macro-plastic fibre reinforced concrete slab-panels10.1016/j.conbuildmat.2014.04.067 ↗
29. The prediction of bending strengths in SFRSCC using Computational Fluid Dynamics (CFD)10.1016/j.conbuildmat.2014.06.003 ↗
30. Calibration patterns for predicting residual strengths of steel fibre reinforced concrete (SFRC)10.1016/j.compositesb.2013.10.086 ↗
31. Influence of the type of fiber on the structural response and design of FRC slabs10.1061/(ASCE)ST.1943-541X.0001515 ↗
32. fib (2010) Model Code 2010. International Federation for Structural Concrete, Lausanne.
33. Plastic fibres as the only reinforcement for flat suspended slabs: parametric study and design considerations10.1016/j.conbuildmat.2014.07.091 ↗
34. Inductive method for assessing the amount and orientation of steel fibers in concrete10.1617/s11527-012-9858-6 ↗
35. Improved assessment of fibre content and orientation with inductive method in SFRC10.1617/s11527-014-0279-6 ↗
36. Assessment of fibre content and 3D profile in cylindrical SFRC specimens10.1617/s11527-014-0521-2 ↗
37. Characterizing fibre dispersion in cement composites using AC-impedance spectroscopy10.1016/j.cemconcomp.2004.06.003 ↗
38. Non-destructive monitoring of fibre orientation using AC-IS: an industrial-scale application10.1016/j.cemconres.2006.05.026 ↗
39. Nondestructive determination of the steel fibre content in concrete slabs with an open-ended coaxial probe10.1109/TGRS.2004.837332 ↗
40. Nondestructive testing of steel-fibre-reinforced concrete using a magnetic approach10.1109/TIM.2010.2090059 ↗
41. A magnetic method for non-destructive monitoring of fibre dispersion and orientation in steel fibre reinforced cementitious composites. Part 1: method calibration10.1617/s11527-011-9793-y ↗
42. Investigation on the relationship between the steel fibre distribution and the post-cracking behaviour of SFRC10.1016/j.conbuildmat.2018.12.081 ↗
43. Experimental and analytical study of the fibre distribution in SFRC: a comparison between image processing and the inductive test10.1016/j.compstruct.2018.01.006 ↗
44. GB/T50081-2019, Standard for Test Method of Mechanical Properties on Ordinary Concrete, 2019.
45. Analysis and modelling of mechanical anchorage of 4D/5D hooked end steel fibres10.1016/j.matdes.2016.09.107 ↗
46. GB50010-2010, Code for design of concrete structures. 2010.
47. Numerical study of the effect of ITZ on the failure behaviour of concrete by using particle element modelling10.1016/j.conbuildmat.2018.03.040 ↗
48. Abaqus analysis user’s manual, 23.6.3 CONCRETE DAMAGED PLASTICITY. ABAQUS, Inc., 2014.
49. Sidoroff F. In IUTAM Symposium on Physical Nonlinearities in Structure [J]. Hult and Lemairte (eds), Springer, Berlin, 1981: pp. 237–244.10.1007/978-3-642-81582-9_35 ↗
50. Abaqus analysis user’s manual, 35.4.1EMBEDDED ELEMEENT. ABAQUS, Inc., 2014.10.1201/b15042-7 ↗