journal article·2020-07

Controlling the hydration and carbonation in lime-based materials: Advantage of slow carbonation in CO2 curable construction materials

Sung-Hoon Kang, Yang-Hee Kwon, Juhyuk Moon

Publisher page

Abstract

Abstract In this study, the role of natural additives (sodium chloride or sugar) in aerial lime mortar was elucidated. It was found that both the hydration and carbonation were accelerated by sodium chloride but retarded by sugar. Especially, sugar prevented the rapid clogging of pores around the mortar surface, which caused the even formation of calcium carbonate crystals throughout the volume of mortar. Therefore, the strength development was significantly accelerated. The slow carbonation and resulting rapid strength development can be practically implementable since it does not rely on long term atmospheric carbonation or use of high concentration of CO2 gas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · CO2 Sequestration and Geologic Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Reactivity of laboratory and industrial limes10.1205/cherd06200 ↗
2. Influence of relative humidity on the carbonation of calcium hydroxide nanoparticles and the formation of calcium carbonate polymorphs10.1016/j.powtec.2010.09.026 ↗
3. Oates · 1998
4. Towards sustainable concrete10.1038/nmat4930 ↗
5. Hydrated lime activation on byproducts for eco-friendly production of structural mortars10.1016/j.jclepro.2019.05.313 ↗
6. Intergovernmental Panel on Climate Change (IPCC), Special report on global warming of 1.5°C: Summary for policymakers, Incheon, Republic of Korea, 2018, pp. 1-33.
7. Enhancement of material properties of lime-activated slag mortar from intensified Pozzolanic reaction and pore filling effect10.3390/su10114290 ↗
8. High-volume use of limestone in ultra-high performance fiber-reinforced concrete for reducing cement content and autogenous shrinkage10.1016/j.conbuildmat.2019.04.091 ↗
9. The role of CO2 capture and utilization in mitigating climate change10.1038/nclimate3231 ↗
10. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
11. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
12. Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials10.1016/j.conbuildmat.2019.05.129 ↗
13. The filler effect: The influence of filler content and surface area on cementitious reaction rates10.1111/jace.12264 ↗
14. The filler effect: The influence of filler content and type on the hydration rate of tricalcium silicate10.1111/jace.14859 ↗
15. Calcined clay limestone cements (LC3)10.1016/j.cemconres.2017.08.017 ↗
16. The use of limestone to replace physical filler of quartz powder in UHPFRC10.1016/j.cemconcomp.2018.09.013 ↗
17. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
18. An investigation of high-volume fly ash concrete blended with slag subjected to elevated temperatures10.1016/j.jclepro.2015.01.031 ↗
19. Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete10.1016/j.jclepro.2014.12.021 ↗
20. Mechanical and environmental properties of carbonated steel slag compacts as a function of mineralogy and CO2 uptake10.1016/j.jcou.2019.05.028 ↗
21. CO2 capture using fly ash from coal fired power plant and applications of CO2-captured fly ash as a mineral admixture for concrete10.1016/j.jenvman.2016.01.010 ↗
22. S.A. Bernal, J.S.J. van Deventer, J.L. Provis, Natural and accelerated carbonation rates of alkali-activated slag/fly ash blended concretes, in: Ana Baričević, Marija Jelčić Rukavina, Domagoj Damjanović, Maurizio Guadagnini (Eds.) International Conference on Sustainable Materials, Systems and Structures (SMSS2019): Durability, Monitoring and Repair of Structures, RILEM Publications S.A.R.L., Rovinj, Croatia, 2019, pp. 357-364.
23. P. Van den Heede, N. De Belie, Difference in carbonation behavior at 0.04%, 1% and 10% CO2 for High-Volume Fly Ash (HVFA) mortar: effect on internal humidity and resistivity, in: Ana Baričević, Marija Jelčić Rukavina, Domagoj Damjanović, Maurizio Guadagnini (Eds.) International Conference on Sustainable Materials, Systems and Structures (SMSS2019): Durability, Monitoring and Repair of Structures, RILEM Publications S.A.R.L., Rovinj, Croatia, 2019, pp. 317-324.
24. Traditional organic additives improve lime mortars: New old materials for restoration and building natural stone fabrics10.1016/j.conbuildmat.2011.03.020 ↗
25. Design and behavior of traditional lime-based plasters and renders. Review and critical appraisal of strengths and weaknesses10.1016/j.cemconcomp.2018.03.005 ↗
26. Masonry repair lime-based mortars: factors affecting the mechanical behavior10.1016/S0008-8846(03)00210-2 ↗
27. Historical and scientific investigations into the use of hydraulic lime in Korea and preventive conservation of historic masonry structures10.3390/su11195169 ↗
28. Quantitative analysis of CO2 uptake and mechanical properties of air lime-based materials10.3390/en12152903 ↗
29. Effects of sodium sulfate on the hydration and properties of lime-based low carbon cementitious materials10.1016/j.jclepro.2019.02.186 ↗
30. Assessment of energy performance and emission control using alternative fuels in cement industry through a process model10.3390/en10121996 ↗
31. Investigation and modification of two kinds of Chinese traditional lime in cultural building relics10.1016/j.culher.2018.02.018 ↗
32. Self-healing capacity of advanced lime mortars
33. CaO-based CO2 sorbents: A review on screening, enhancement, cyclic stability, regeneration and kinetics modelling10.1016/j.jcou.2017.11.012 ↗
34. The effect of HCl and steam on cyclic CO2 capture performance in calcium looping systems (in press)
35. The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production10.1016/j.cherd.2010.10.013 ↗
36. Investigation into potential synergy between power generation, cement manufacture and CO2 abatement using the calcium looping cycle10.1039/c1ee01282g ↗
37. CO2 capture from cement plants using oxyfired precalcination and/or calcium looping10.1021/es2030593 ↗
38. Reduction of greenhouse gas emissions by integration of cement plants, power plants, and CO2 capture systems10.1002/ghg3.5 ↗
39. Pilot testing of enhanced sorbents for calcium looping with cement production10.1016/j.apenergy.2018.05.039 ↗
40. Direct air capture of CO2 via aqueous-phase absorption and crystalline-phase release using concentrated solar power10.1038/s41560-018-0150-z ↗
41. An inter-model assessment of the role of direct air capture in deep mitigation pathways10.1038/s41467-019-10842-5 ↗
42. Hydration and carbonation reactions of calcium oxide by weathering: Kinetics and changes in the nanostructure10.1016/j.cej.2014.12.062 ↗
43. Influence of sticky rice and anionic polyacrylamide on the crystallization of calcium carbonate in Chinese organic sanhetu10.1142/S0218625X15500730 ↗
44. Building limes for cultural heritage conservation in China
45. Traditional methods of mortar preparation: The hot lime mix method10.1016/j.cemconcomp.2011.05.008 ↗
46. The effects of limestone characteristics and calcination temperature to the reactivity of the quicklime10.1016/S0008-8846(00)00490-7 ↗
47. Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar10.1016/j.conbuildmat.2017.04.120 ↗
48. Lime mortars for the conservation of historic buildings10.1179/sic.2002.47.1.62 ↗
49. Cementation by the carbonation of hydrated lime10.1016/0008-8846(86)90044-X ↗
50. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
51. Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions10.1016/j.cemconres.2017.03.009 ↗
52. Accelerated carbonation of ceramic materials. Application to bricks from Andalusian factories (Spain)10.1016/j.conbuildmat.2018.05.285 ↗
53. Mineral carbonation of ceramic brick at low pressure and room temperature. A simulation study for a superficial CO2 store using a common clay as sealing material10.1016/j.clay.2018.04.021 ↗
54. Carbon dioxide mineral carbonation through pH-swing process: A review10.1016/j.egypro.2014.12.311 ↗
55. A review on carbon dioxide mineral carbonation through pH-swing process10.1016/j.cej.2015.05.064 ↗
56. Enhancement of CaO for CO2 capture in an FBC environment10.1016/j.cej.2003.08.011 ↗
57. Technology of medieval mortars: An investigation into the use of organic additives10.1111/arcm.12155 ↗
58. The identification of organic additives in traditional lime mortar10.1016/j.culher.2013.04.001 ↗
59. Analytical investigations of traditional masonry mortars from ancient city walls built during Ming and Qing Dynasties in China10.1080/15583058.2015.1104399 ↗
60. Role of additives in mortars: Historic precedents
61. The hydration of lime10.1021/ie50194a004 ↗
62. Mechanical and physical properties of natural additive dispersed lime10.1016/j.jobe.2017.10.009 ↗
63. British Standards Institution (BSI), BS EN 459-2: 2010, Building lime. Test methods, BSI Standards Publication, 2010.
64. Scrivener · 2016
65. Microstructural investigation of heat-treated ultra-high performance concrete for optimum production10.3390/ma10091106 ↗
66. ASTM · 2016 · 10
67. The effect of surface carbonation on the hydration of CaO10.1016/0008-8846(90)90015-P ↗
68. The influence of chloride and sulphate ions on the slaking rate of lime derived from different limestone deposits in South Africa
69. An empirical study of factors influencing lime slaking Part II: Lime constituents and water composition10.4314/wsa.v29i2.4850 ↗
70. Nanostructure and irreversible colloidal behavior of Ca(OH)2: Implications in cultural heritage conservation10.1021/la051338f ↗
71. Mechanism of hydration of calcium oxide10.1038/201288a0 ↗
72. A kinetic analysis of the role of polymers in mineral nucleation. The example of gypsum10.1016/j.cemconres.2019.105837 ↗
73. Study of the hydration of CaO powder by gas–solid reaction10.1016/j.cemconres.2011.06.014 ↗
74. Correlation between full width at half maximum (FWHM) of XRD peak with residual stress on ground surfaces10.1080/14786435.2012.704429 ↗
75. Effect of the nano crystal size on the X-ray diffraction patterns of biogenic hydroxyapatite from human, bovine, and porcine bones10.1038/s41598-019-42269-9 ↗
76. Calcium hydroxide crystal evolution upon aging of lime putty10.1111/j.1151-2916.1998.tb02735.x ↗
77. Lime mortars – The role of carboxymethyl cellulose on the crystallization of calcium carbonate10.1016/j.conbuildmat.2018.02.119 ↗
78. Solubility of CO2 in water and NaCl solution in equilibrium with hydrate
79. Microstructure evolution of lime putty upon aging10.1016/j.jcrysgro.2010.05.020 ↗
80. Aging of lime putty: Effects on traditional lime mortar carbonation10.1111/j.1151-2916.2000.tb01332.x ↗
81. Effect of aging on rheological properties of lime putty10.1111/j.1551-2916.2004.01764.x ↗
82. Forced and natural carbonation of lime-based mortars with and without additives: Mineralogical and textural changes10.1016/j.cemconres.2004.12.012 ↗
83. Lime putties and mortars10.1179/sic.2008.53.1.9 ↗
84. Importance of drying to control internal curing effects on field casting ultra-high performance concrete10.1016/j.cemconres.2018.03.008 ↗
85. Accelerating carbonation in lime-based mortar in high CO2 environments10.1016/j.conbuildmat.2018.08.125 ↗