journal article·2020-09

Rejuvenating effect of soft bitumen, liquid surfactant, and bio-rejuvenator on artificial aged asphalt

Jiangmiao Yu, Yunfei Guo, Lin Peng, Feng Guo, Huayang Yu

Publisher page

Abstract

Abstract Challenges are existing when applying high percentages of reclaimed asphalt pavement (RAP) into construction as the aged RAP binder became more brittle, and stiffer after second-round usage. The bio-rejuvenator with dramatic environmental effects can alleviate stiffness and increases viscous components of aged RAP binder and is becoming popular in the incorporation with RAP. Unfortunately, till now, there is no research available to fully characterize and compare the regenerating effect between bio- rejuvenator, soft bitumen, and warm mix asphalt additives on high artificial RAP binder. To overcome this issue, in this study, a bio-rejuvenator and the other two rejuvenators including soft bitumen and Evotherm-DAT, were used to quantify the difference on regenerating effects of asphalt binder with different contents of artificial RAP binder. Penetration, softening point, rotational viscometer, dynamic shear rheometer (DSR), and bending beam rheometer (BBR) test were performed to characterize the basic properties, workability, and rheological properties of prepared samples. Test results showed that the bio-rejuvenator had the most effective rejuvenating impact, while its improvement on low-temperature performance was limited when it was used on binder containing 80% of artificial RAP binders. In addition, Evotherm-DAT had a significant softening effect on binder containing 30% of artificial RAP binders. Finally, it was found that Evotherm-DAT and bio-rejuvenator can perform well when maximum artificial RAP binder contents were 50% and 80%, respectively. The results of this study indicate possible uses of three different rejuvenators to improve the rejuvenating performance on the high percentage of RAP binder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Expansion level of steel slag aggregate effects on both material properties and asphalt mixture performance10.1177/0361198119835513 ↗
2. Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber10.1016/j.jclepro.2016.09.043 ↗
3. Recycling waste packaging tape into bituminous mixtures towards enhanced mechanical properties and environmental benefits10.1016/j.jclepro.2019.04.409 ↗
4. Effect of mixing sequence on asphalt mixtures containing waste tire rubber and warm mix surfactants10.1016/j.jclepro.2019.119008 ↗
5. Study of migration and diffusion during the mixing process of asphalt mixtures with RAP
6. Life-cycle economic and environmental assessment of warm stone mastic asphalt
7. Alternative methods for increasing the durability of RAP mixtures
8. Laboratory performance analysis of high percentage artificial RAP binder with WMA additives10.1016/j.conbuildmat.2017.04.142 ↗
9. Design and performance of emulsified asphalt mixtures containing construction and demolition waste10.1016/j.conbuildmat.2019.117846 ↗
10. Effect of aging on chemical and rheological properties of bitumen10.3390/polym10121345 ↗
11. Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures10.1016/j.conbuildmat.2006.03.006 ↗
12. I.L. Al-Qadi, Q. Aurangzeb, S.H. Carpenter, W.J. Pine, J. Trepanier, Impact of high RAP contents on structural and performance properties of asphalt mixtures, 2012.
13. Hybrid life cycle assessment for asphalt mixtures with high RAP content10.1016/j.resconrec.2013.12.004 ↗
14. E. Coleri, S.S. Haddadi, S. Sreedhar, S. Lewis, Y. Zhang, B. Wruck, Binder-grade bumping and high binder content to improve performance of RAP-RAS mixtures, 2018.
15. Binder design of high RAP content hot and warm asphalt mixture wearing courses10.1080/14680629.2015.1029707 ↗
16. An economical processing technique to improve RAP inclusive concrete properties10.1016/j.conbuildmat.2017.05.030 ↗
17. Soft bitumen asphalt produced using RAP10.1617/s11527-016-0871-z ↗
18. K.A. Ahmad, M.E. Abdullah, N.A. Hassan, N. Usman, M.R.M. Hassan, M.A. Bilema, S.M. Saeed, A. Batari, Effect of Bio based rejuvenator on mix design, Energy consumption and GHG Emission of High RAP Mixture, IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2018, p. 012086.10.1088/1755-1315/140/1/012086 ↗
19. Recycled heavy bio oil as performance enhancer for rubberized bituminous binders10.3390/polym11050800 ↗
20. Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator10.1016/j.conbuildmat.2017.06.099 ↗
21. Physical–chemical properties of aged asphalt rejuvenated by bio-oil derived from biodiesel residue10.1016/j.conbuildmat.2015.12.025 ↗
22. Application of a bio-binder as a rejuvenator for wet processed asphalt shingles in pavement construction10.1016/j.conbuildmat.2015.03.085 ↗
23. AASHTO T240, Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test), American Association of State and Highway Transportation Officials 2013 Washington, DC, USA.
24. AASHTO R 28–12, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV), American Association of State and Highway Transportation Officials 2012 Washington, DC, USA.
25. Enhanced storage stability of different polymer modified asphalt binders through nano-montmorillonite modification10.3390/nano10040641 ↗
26. Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents10.1061/(ASCE)MT.1943-5533.0000315 ↗
27. Performance research of regenerative agent based on SBS-modified asphalt
28. Recycling long-term-aged asphalts using bio-binder/plasticizer-based rejuvenator10.1016/j.conbuildmat.2017.04.066 ↗
29. Field-aged asphalt binder performance evaluation for Evotherm warm mix asphalt: comparisons with hot mix asphalt10.1016/j.conbuildmat.2017.09.016 ↗
30. Use of rejuvenator, styrene-butadiene rubber latex, and warm-mix asphalt technology to achieve conventional mixture performance with 50% reclaimed asphalt pavement10.3141/2575-17 ↗
31. ASTM D5, Standard Test Method for Penetration of Bituminous Material 1997 Conshohocken, PA, USA
32. ASTM D36, Standard Test Method for Softening Point of Bitumen (Ring and Ball Apparatus) 1995 Conshohocken, PA, USA
33. AASHTO T316, Standard method of test for viscosity determination of asphalt binder using rotational viscometer: American Association of State Highway and Transportation Officials 2010 Washington, DC, USA
34. AASHTO T315–12, Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR), American Association of State and Highway Transportation Officials 2012 Washington, DC, USA
35. AASTHO TP 101–14, UL, Estimating Damage Tolerance of Asphalt Binders Using the LAS, American Association of State and Highway Transportation Officials 2013 Washington DC, USA.
36. Fatigue resistance of asphalt binders: Assessment of the analysis methods in strain-controlled tests10.1016/j.conbuildmat.2015.08.070 ↗
37. C.M. Johnson, Estimating asphalt binder fatigue resistance using an accelerated test method, 2010.
38. AASHTO T313, Determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR): American Association of State Highway and Transportation Officials 2012 Washington, DC, USA.
39. Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders10.1016/j.fuel.2014.06.038 ↗
40. Interpretation of dynamic mechanical test data for paving grade asphalt cements (with discussion)
41. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
42. Evaluation of fatigue criteria for asphalt binders10.3141/1766-07 ↗
43. Evaluation and validation of fatigue testing methods for rubberized bituminous specimens10.1177/0361198119841308 ↗
44. Residual strength model and cumulative damage characterization of asphalt mixture subjected to repeated loading10.1016/j.ijfatigue.2020.105534 ↗
45. Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests10.1016/j.jclepro.2019.02.131 ↗
46. Experimental evaluation of the potential of the sap of the petroleum plant as an asphalt binder rejuvenating agent10.1080/14680629.2019.1628436 ↗
47. Thermal and rheological performance of asphalt binders modified with expanded graphite/polyethylene glycol composite phase change material EP-CPCM10.1016/j.conbuildmat.2018.11.011 ↗
48. Fatigue characterization of bio-modified asphalt binders under various laboratory aging conditions10.1016/j.conbuildmat.2019.03.069 ↗