journal article·2020-10

Coordinated adjustment and optimization of setting time, flowability, and mechanical strength for construction 3D printing material derived from solid waste

Qamar Shahzad, Xujiang Wang, Wenlong Wang, Yi Wan, Guolin Li, Changzai Ren, Yanpeng Mao

Publisher page

Abstract

Abstract Construction 3D printing (C3DP), as a green building concept, yields savings in terms of time, material, and labor costs and, hence, has become increasingly popular in recent years. The potential printing materials should have the characteristics of low cost, quick-setting, good flowability, and high mechanical strength. However, these properties are difficult to be obtained simultaneously in material adjustment. In the present study, the coordinated adjustment and optimization of setting time, flowability, and mechanical strength for a sulfoaluminate high-activity material (SHAM) were achieved, and the material was proved to be suitable for C3DP. This material was entirely prepared from industrial solid waste ingredients and thus cost-effective when used in C3DP. Optimal initial setting time (42 min), flowability (180.7 mm), and compressive strength (19.2 MPa and 97.5 MPa for 2-h and 28-d, respectively) were realized. The coordinated adjustment of these three properties was realized through cross changing the ratios of boric acid as a retarder and flowability enhancer and lithium carbonate as an accelerator. Moreover, 3D structures with different shapes were successfully printed using optimized material. This work has opened the way for the use of solid waste to prepare high value-added products and promote green building construction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Experimental research on transition from scale 3D printing to full-size printing in construction10.1016/j.conbuildmat.2019.02.171 ↗
2. L. S. woo, T. Le, J. Webster, and T. Thorpe. “Fabricating construction components using layered manufacturing technology.” Autom. Constr., 21(2012) 262-268.https://doi.org/10.1016/j.autcon.2011.06.01010.1016/j.autcon.2011.06.010 ↗
3. Design, data and process issues for mega-scale rapid manufacturing machines used for construction10.1016/j.autcon.2008.03.001 ↗
4. B. Khoshnevis, Automated construction by contour crafting-related robotics and information technologies, Autom. Constr. 13 (2004) 5–19, https://doi.org/10.%201016/j.autcon.2003.08.012.10.1016/j.autcon.2003.08.012 ↗
5. B. Nematollahi, M. Xia, J. Sanjayan, Current progress of 3D concrete printing technologies, ISARC, Proceedings of the International Symposium on Automation and Robotics in Construction, Taipei, 2017, https://doi.org/10.22260/ISARC2017/%200035.10.22260/ISARC2017/0035 ↗
6. Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete10.1016/j.autcon.2017.08.019 ↗
7. A. Barazanchi, K.C. Li, B. Al‐Amleh, K. Lyons, J.N.J.J.O.P. Waddell, Additive technology: update on current materials and applications in dentistry, J. Prosthodont. 26(2) (2017) 156-163.http://dx.doi.org/10.1111/jopr.1251010.1111/jopr.12510 ↗
8. D.I. Wimpenny, P.M. Pandey, L.J. Kumar, Advances in 3D printing & additive manufacturing technologies, Singapore, Springer 2017, http://dx.doi.org/10.1007/978-981-10-0812-2.10.1007/978-981-10-0812-2 ↗
9. A critical review of the use of 3-D printing in the construction industry10.1016/j.autcon.2016.04.005 ↗
10. S.H. Huang, P. Liu, A. Mokasdar, L.J.T.I.J.O.A.M.T. Hou, Additive manufacturing and its societal impact: a literature review, Int. J. Adv. Manuf. Technol. 67(5-8) (2013) 1191-1203.https://doi.org/10.1007/s00170-012-4558-510.1007/s00170-012-4558-5 ↗
11. D. Olga, E. Sorokina, N. Kopanitsa, and Y. Sarkisov. “Mortars for 3D printing.” InMATEC Web of Conferences, vol. 143, p. 02013. EDP Sciences, 2018.https://doi.org/10.1051/matecconf/20181430201310.1051/matecconf/201814302013 ↗
12. N. Narelle, V. Naidu, and V. Mechtcherine. “Studying the printability of fresh concrete for formwork-free concrete onsite 3D printing technology (CONPrint3D).” In3D Concrete Printing Technology, 16 (2019) 333-347. Butterworth-Heinemann.https://doi.org/10.1016/B978-0-12-815481-6.00016-610.1016/B978-0-12-815481-6.00016-6 ↗
13. B.J.B.h. Berman, 3-D printing: The new industrial revolution, J. Bus. Horiz. 55(2) (2012) 155-162. https://doi.org/10.1016/j.bushor.2011.11.00310.1016/j.bushor.2011.11.003 ↗
14. The status, challenges, and future of additive manufacturing in engineering10.1016/j.cad.2015.04.001 ↗
15. Y.Tarhan, R.Sahin, ‘Developments of 3D Concrete Printing Process.’ ICEARC 19 Conference proceedings, April 2019, Trabzon, Turkey.
16. J.N. Ziyatdinova, P.N. Osipov, A.N. Bezrukov, Global challenges and problems of Russian engineering education modernization, 2015 International Conference on Interactive Collaborative Learning (ICL), IEEE, 20-24 September 2015, pp. 397-400. https://doi.org/10.1109/icl.2015.7318061.10.1109/ICL.2015.7318061 ↗
17. D. Chernyh, Picture is basic subject of Russian education in sphere of art, architecture and design in xxi century, IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2018, p. 012172. https://doi.org/10.1088/1757-899X/335/1/0121710.1088/1742-6596/451/1/012172 ↗
18. S. Lim, R.A. Buswell, T.T. Le, S.A. Austin, A.G. Gibb, T.J.A.I.C. Thorpe, Developments in construction-scale additive manufacturing processes, J. Automat. Constr. 21 (2012) 262-268.https://doi.org/10.1016/j.autcon.2011.06.01010.1016/j.autcon.2011.06.010 ↗
19. S.Le, T.Austin, S.A., Lim, S. et al. Mix design and fresh properties for high-performance printing concrete. Mater Struct 45 (2012) 1221–1232. https://doi.org/10.1617/s11527-012-9828-z10.1617/s11527-012-9828-z ↗
20. Rheological requirements for printable concrete10.1016/j.cemconres.2018.04.005 ↗
21. Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model10.1016/j.conbuildmat.2017.12.112 ↗
22. Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air-entraining agent10.1016/j.conbuildmat.2019.03.186 ↗
23. P. Panda, C. Biranchi, and M. J. Tan. “Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application.”Mater. Lett.237 (2019) 348-351.https://doi.org/10.1016/j.matlet.2018.11.13110.1016/j.matlet.2018.11.131 ↗
24. Hardened properties of high-performance printing concrete10.1016/j.cemconres.2011.12.003 ↗
25. W. Nematollahi, D. Behzad, P. Vijay, and V. Mechtcherine. “Effect of polypropylene fiber addition on properties of geopolymers made by 3D printing for digital construction.”Mater.11 (12) (2018) 2352.https://doi.org/10.3390/ma1112235210.3390/ma11122352 ↗
26. E. Hambach, M. Manuel, M. Rutzen, and D. Volkmer. “Properties of 3D-printed fiber-reinforced Portland cement paste.” In3DCP tech., pp. 73-113. Butterworth-Heinemann, 2019.https://doi.org/10.1016/B978-0-12-815481-6.00005-110.1016/B978-0-12-815481-6.00005-1 ↗
27. Printability and fire performance of a developed 3D printable fiber reinforced cementitious composites under elevated temperatures10.1080/17452759.2018.1555046 ↗
28. L. Sultan, G. Daniel, and V.C. Li. “A self-reinforced cementitious composite for building-scale 3D printing.”Cem. Concr. Comp.90 (2018) 1-13.https://doi.org/10.1016/j.cemconcomp.2018.03.01710.1016/j.cemconcomp.2018.03.017 ↗
29. Properties of self-compacting Portland pozzolana and limestone blended cement concretes containing different replacement levels of slag10.1617/s11527-011-9706-0 ↗
30. P. Mithileshdatta, D.N.K. Arora, and P. Thakur. “State Of Art Paper: Investigation of Workability of Cement Paste, Cement Mortar and Concrete by various Methods.”
31. G. Temiz, C. Hussein, M.M. Kose, and H.M. Genc. “Mechanical Behavior of White Concrete.”Tem, Journal 73.10.18421/TEM21-10 ↗
32. J. Scrivener, L. Karen, J.L. Cabiron, and R. Letourneux. “High-performance concretes from calcium aluminate cement.”Cem. Concr. Res.29 (8) (1999) 1215-1223.https://doi.org/10.1016/S0008-8846(99)00103-910.1016/S0008-8846(99)00103-9 ↗
33. The Constructor, F.U. Rahman, India, accessed on 25 March 2020 https://theconstructor.org/concrete/low-heat-cement/23418/
34. Civil Engineering, USA, accessed 25 March 2020 https://civiltoday.com/civil-engineering-materials/cement/250-types-of-cement
35. G. Prassidah, Cement and construction materials, accessed on 25 March 2020 http://www.civileblog.com/high-alumina-cement/
36. The Quick rete, Cement and Concrete products, USA accessed on 25 March 2020 www.quikrete.com
37. V. Litvinenko, K. Topfer, Innovation-Based Development of the Mineral Resources Sector: Challenges and Prospects: Proceedings of the 11th Russian-German Raw Materials Conference, November 7-8, 2018, Potsdam, Germany, 1st Edition, CRC Press 2018.10.1201/9780429022388 ↗
38. Complex concrete structures: merging existing casting techniques with digital fabrication10.1016/j.cad.2014.02.011 ↗
39. Preparation of high-performance cementitious materials from industrial solid waste10.1016/j.conbuildmat.2017.06.124 ↗
40. Synergistic use of industrial solid waste mixtures to prepare ready-to-use lightweight porous concrete10.1016/j.jclepro.2018.11.252 ↗
41. Complementary use of industrial solid wastes to produce green materials and their role in CO2 reduction10.1016/j.jclepro.2019.119840 ↗
42. Alibaba, Hangzhou, Zhejiang Province, P.R. China. Accessed on March 27 https://www.alibaba.com/?spm=a2700.7724857.scGlobalHomeHeader.3.3d6c160fgRoJE9
43. Synergistic use of industrial solid waste mixtures to prepare ready-to-use lightweight porous concrete10.1016/j.jclepro.2018.11.252 ↗
44. Preparation of magnesium oxysulfate cement using magnesium-rich byproducts from the production of lithium carbonate from salt lakes10.1016/j.conbuildmat.2018.04.005 ↗
45. The Effects of Boron Compounds on the Properties of Cementitious Composites10.1515/SECM.2010.17.1.1 ↗
46. Effect of Boric Acid on Hydration of Calcium Sulfoaluminate
47. Investigation of rheological properties of blended cement pastes using rotational viscometer and dynamic shear rheometer
48. Effect of Lithium-Slag in the Performance of Slag Cement Mortar Based on Least-Squares Support Vector Machine Prediction10.3390/ma12101652 ↗
49. T. Matusinovic, D.J.C. Čurlin, C. Research, Lithium salts as set accelerators for high alumina cement, Cem. Concr. Res. 23(4) (1993) 885-895. https://doi.org/10.1016/0008-8846(93)90042-810.1016/0008-8846(93)90042-8 ↗
50. Investigation of the effects of boric acid and boric acid waste on the alkaline activation of blast furnace slag
51. Effect of boric acid and lithium chloride on magnesium oxysulfate cement
52. The effect of boron and its compounds on setting of portland cement, Advanced Materials Research, Trans Tech Publ
53. D.A. Hall, R. Stevens, B.J.C. El-Jazairi, C. Research, The effect of retarders on the microstructure and mechanical properties of magnesia–phosphate cement mortar, Cem. Concr. Res. 31(3) (2001) 455-465. https://doi.org/10.1016/S0008-8846(00)00501-910.1016/S0008-8846(00)00501-9 ↗
54. M.J.A.P.P. Davraz, A., the Effect of Boron Compound to Cement Hydration and Controllability of this Effect, Acta Phys. Pol. 128 (2015) 26-33. https://doi.org/10.12693/APhysPolA.128.B-2610.12693/APhysPolA.128.B-26 ↗
55. D. Volkman, P.J.J.O.T. Bussolini, evaluation, Comparison of fine particle colemanite and boron frit in concrete for time-strength relationship, J. Test. Eval. 20(1) (1992) 92-96. https://doi.org/10.1520/JTE11903J10.1520/JTE11903J ↗
56. The influence of lithium carbonate on phase composition of calcium aluminate cement paste10.1016/j.proeng.2015.06.159 ↗
57. Y.H. Deng, C.Q. Zhang, Effects of Different Lithium Admixtures on Ordinary Portland Cement Paste Properties, Advanced Materials Research, Trans Tech Publ, J. Mater. Sci. Eng. (2014)1780-1789. https://doi.org/10.4028/www.scientific.net/AMR.919-921.178010.4028/www.scientific.net/AMR.919-921.1780 ↗
58. E. Soudée, J.J.C. Pera, C. Research, Mechanism of setting reaction in magnesia-phosphate cements, Cem. Concr. Res. 30(2) (2000) 315-321. https://doi.org/10.1016/S0008-8846(99)00254-10.1016/S0008-8846(99)00254-9 ↗
59. N.S.O.P.S.R.O. China, GB/T 1346-2011: Test methods for water requirement of normal consistency, setting time and soundness of the Portland cement, Standards Press of China Beijing, China, 2011. https://www.chinesestandard.net (accessed 20 september 2019)