journal article·2020-10

Effect of water–cement ratio, aggregate type, and curing temperature on the fracture energy of concrete

Xiangen Wang, Halwan Alfisa Saifullah, Hiroki Nishikawa, Kenichiro Nakarai

Publisher page

Abstract

Abstract Recently, fracture energy has received considerable attention owing to its importance in predicting crack propagation in concrete structures. The increase in the use of limestone aggregate concrete showing small fracture energy requires a deeper understanding of the key factors affecting fracture energy. In this study, a digital evaluation is performed for the fracture surface of concrete fabricated with different water–cement ratios, types of aggregate, and curing temperatures. The obtained results reveal the following relationships: (i) the ratio of un-broken coarse aggregate on the fracture surface decreases with weaker aggregate and stronger cement paste; (ii) the fracture surface roughness has a high correlation with the un-broken aggregate ratio under various conditions; and (iii) the variation in the fracture energy per unit compressive strength is uniformly explained using the area increment of the fracture surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
2. Crack band theory for fracture of concrete
3. A review on fracture energy and effective parameters10.1016/j.cemconres.2019.03.013 ↗
4. Fracture energy of concrete: practical performance and experimental results10.1016/0008-8846(80)90055-1 ↗
5. Effect of Specimen and Crack Sizes, Water/cement Ratio and Coarse Aggregate Texture Upon Fracture Toughness of Concrete10.1680/macr.1984.36.129.227 ↗
6. High Strength Concretes Incorporating Different Coarse Aggregates
7. Fracture energy of high-strength concrete
8. Influence of age of loading, water-cement ratio and rate of loading on fracture energy of concrete10.1007/BF02472745 ↗
9. 9. K. Matsumoto, K. Fujita, Y. Takagi, and K. Kawakami. Study on material properties and fracture energy of high strength concrete. Proc. JCI Annual Conf. 24 (2002) No. 2, 739–744. (Japanese)
10. Mechanical properties of three high-strength concretes containing silica fume
11. Kozul · 1997
12. Effect of aggregate on the fracture behavior of high strength concrete10.1016/j.conbuildmat.2004.04.013 ↗
13. Fracture Properties and Brittleness of High-Strength Concrete
14. Effect of coarse aggregate on the behavior of normal and high-strength concretes10.1520/CCA10128J ↗
15. The fracture energy (G F) of high-strength concretes10.1007/BF02472938 ↗
16. Fracture properties of high strength concrete with varying silica fume content and aggregates10.1016/0008-8846(95)00043-C ↗
17. K. Mitsui, M. Kojima and T. Yonezawa. Effect of Properties of Aggregate on the Strength Development of Ultra High Strength Concrete under Elevated Temperature at Early Age, Proc. JCI Annual Conf. (1995) 17(1), 1025-1030. (in Japanese)
18. Effect of coarse aggregate type on mechanical properties of high-performance concrete10.1016/S0008-8846(01)00588-9 ↗
19. Fractal Characterization of Fracture Surface in Concrete10.1016/0013-7944(90)90182-G ↗
20. Effect of fracture path on the fracture energy of high-strength concrete10.1016/S0008-8846(01)00610-X ↗
21. Fractal dimension-a measure of fracture roughness and thoughness of concrete10.1016/S0013-7944(02)00019-X ↗
22. The Effects of Limestone Aggregate on Concrete Properties10.1016/j.conbuildmat.2010.05.008 ↗
23. Shear Strength of Reinforced Limestone Aggregate Concrete Beams10.14359/51689725 ↗
24. Development of microstructures in plain cement pastes hydrated at different temperatures10.1016/0008-8846(91)90044-I ↗
25. Compressive strength development of concrete with different curing time and temperature10.1016/S0008-8846(98)00164-1 ↗
26. Effect of elevated temperature curing on properties of alkali-activated slag concrete.“10.1016/S0008-8846(99)00143-X ↗
27. Yang, Y., Sato, R. and Tazawa, E.: A Proposal of Measuring Method for Thermal Expansion Coefficient of Hardening High Strength Concrete, Proc. JCI Annual Conf. (2000) 22, No. 2, 961–966. (Japanese)
28. Fracture energy of high-performance concrete at temperatures up to 450 C
29. Effects of curing conditions on properties of concrete using slag replacement10.1016/S0008-8846(00)00200-3 ↗
30. Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition10.1016/j.cemconres.2004.07.037 ↗
31. Residual fracture energy of cement paste, mortar and concrete subjected to high temperature10.1016/j.tafmec.2005.11.007 ↗
32. Effect of Elevated Temperature on Mechanical Properties of Limestone, Quartzite and Granite Concrete Int10.1007/s40069-016-0175-2 ↗
33. Residual fracture properties of concrete subjected to elevated temperature10.1617/s11527-012-9823-4 ↗
34. Reduction of interior temperature of mass concrete using suspension of phase change materials as cooling fluid10.1016/j.conbuildmat.2011.06.053 ↗
35. Detection of microcracking in concrete subjected to elevated temperature at very early age by acoustic emission10.3151/jact.8.201 ↗
36. Determination of size-independent specific fracture energy of concrete from three-point bend and wedge splitting tests10.1680/macr.2003.55.2.133 ↗
37. Size effect on specific fracture energy of concrete10.1016/j.engfracmech.2006.01.031 ↗
38. Size independent fracture energy from fracture release rate in Plain Concrete Beams10.1016/j.engfracmech.2012.10.007 ↗
39. JIS R 5211: Portland blast-furnace slag cement, Japan Industrial Standards, 2009. (Japanese)
40. JIS A 1108: Method of test for compressive strength of concrete, Japan Industrial Standards, 2006. (Japanese)
41. JIS A 1113: Method of test for splitting tensile strength of concrete, Japan Industrial Standards, 2006. (Japanese)
42. JCI-S-001-2003: Method of test for fracture energy of concrete by use of notched beam, Japan Concrete Institute Standard, 2003. (Japanese)
43. RILEM FMC-50: Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Materials and Structures 18(4), (1985) 287-290.10.1007/BF02472918 ↗
44. JSCE. Standard Specifications for Concrete Structures-2007 “Design”, JSCE Guideline for Concrete, 2010
45. Interaction between Carbonate Rock and Cement Paste10.1016/0008-8846(86)90128-6 ↗