Adhesion property of bituminous crack sealants to different asphalt mixtures based on surface energy theory
Source abstract
Abstract
Abstract In order to quantitatively evaluate the adhesion property of bituminous crack sealants to the crack walls formed by different types of asphalt mixtures, the surface energy components of raw materials were determined by the sessile drop method. Then the adhesion work of sealants and pavement materials was calculated respectively. The correlation between indexes of adhesion work was verified by quantitative boiling method and scanning electron microscope (SEM) test. Finally, four kinds of mixture specimens were formed, and the geometrical information of cross-section of mixture was extracted based on the digital image processing (DIP) technique. The weighted average adhesion work of the cross-section was calculated and verified by the shear tests. The test results show that the surface energy of basalt is obviously higher than that of the SBS modified asphalt and sealant. Among the components of surface energy of three materials, the dispersion component is dominant. The adhesion work of sealant and aggregate is higher than that of SBS modified asphalt. Test results of quantitative boiling method show that there is a good linear relationship between the mass loss rate of the sealant and the index of the adhesion work. The determination coefficient is as high as 0.96, indicating that the index of adhesion work can accurately characterize the adhesion performance of sealant and aggregate. DIP test results show that the aggregate of four mixtures accounts for the largest area, which exceeds 71% of total area. The relationship between the weighted average adhesion work of four mixtures and sealant A is AC-13 > AC-25 > SMA-13 > AC-20, which is consistent with results of the shear tests. The determination coefficient of linear correlation is 0.8672, which indicates that the proposed weighted average adhesion work can accurately characterize the actual adhesion state of interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints
2. Recycled aggregates from construction and demolition wastes as alternative filling materials for highway subgrades in China10.1016/j.jclepro.2020.120223 ↗
3. Viscoelastic model and stress relaxation evaluation of pavement crack sealants at low temperature10.1061/(ASCE)MT.1943-5533.0001982 ↗
4. A new laboratory evaluation method for the adhesive performance of crack sealants10.1520/JTE102845 ↗
5. Using a polymer-based sealant material to make crack repair of asphalt pavement10.1520/JTE20170041 ↗
6. Field aging and development of aging model for hot-poured crack sealants10.3141/2481-12 ↗
7. Effect of surface tension on the measurement of surface energy components of asphalt binders using the Wilhelmy Plate Method10.1016/j.conbuildmat.2015.08.125 ↗
8. Modeling of adsorption isotherms of probe vapors on aggregates for accurate determination of aggregate surface energy components10.1016/j.conbuildmat.2016.12.062 ↗
9. Proposed approach for determining consistent energy parameters based on the surface free energy theory10.1061/(ASCE)MT.1943-5533.0002467 ↗
10. Using the surface free energy (SFE) method to investigate the effects of additives on moisture susceptibility of asphalt mixtures10.1016/j.ijadhadh.2019.102437 ↗
11. Development of a pressurized blister test for interface characterization of aggregate highly polymerized bituminous materials10.1061/(ASCE)MT.1943-5533.0000222 ↗
12. Effect of bituminous material rheology on adhesion
13. Development of a crack sealant adhesion test (CSADT) specification for hot-poured bituminous sealants10.1520/JTE103108 ↗
14. Study on the cohesion and adhesion of hot-poured crack sealants10.1007/s11709-017-0400-3 ↗
15. ASTM D5329-09. Standard test methods for sealants and fillers, hot-applied, for joints and cracks in asphaltic and portland cement concrete pavements, ASTM, Philad-elphia, 2009.
16. Development of a modified adhesion test for hot-poured asphalt crack sealants10.3141/2612-10 ↗
17. Three-Dimensional simulation of aggregate and asphalt mixture using parameterized shape and size gradation10.1061/(ASCE)MT.1943-5533.0002623 ↗
18. F. Lubinda, Walubita, L. Fuentes, S.I. Lee, et al., Comparative evaluation of five HMA rutting-related laboratory test methods relative to tield performance data: DM, FN, RLPD, SPST, and HWTT, Constr. Build. Mater. 215 (2019) 737–753.10.1016/j.conbuildmat.2019.04.250 ↗
19. Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete10.1016/j.conbuildmat.2019.05.059 ↗
20. Fatigue crack growth of a hot mix asphalt using digital image correlation
21. Comparison of Wilhelmy plate and sessile drop methods to rank moisture damage susceptibility of asphalt - aggregates combinations10.1016/j.conbuildmat.2016.03.060 ↗
22. Rapid estimation of resilient modulus of subgrade soils using performance-related soil properties
23. Assessment of a sessile drop device and a new testing approach measuring contact angles on aggregates and asphalt binders10.1061/(ASCE)MT.1943-5533.0000852 ↗
24. Attractive forces at interfaces10.1021/ie50660a008 ↗
25. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
26. Studies on surface energy of asphalt and aggregate at different scales and bonding property of asphalt-aggregate system10.1080/14680629.2017.1300597 ↗
27. A reliability study of adhesion mechanism between liquid crystal polymer and silicone adhesive10.1016/j.microrel.2012.07.027 ↗
28. Measurement of water resistance of asphalt based on surface free energy analysis using stripping work between asphalt-aggregate system10.1016/j.conbuildmat.2018.05.055 ↗
29. Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt10.1080/10298436.2013.778410 ↗
30. Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture10.1080/14680629.2017.1279072 ↗
31. Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations10.1016/j.conbuildmat.2012.07.051 ↗
32. Examination of moisture sensitivity of aggregate-bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests10.1080/10298436.2013.855312 ↗
33. Effects of the asphalt penetration grade and the mineralogical composition on the asphalt-aggregate bond10.1080/10916466.2013.879175 ↗
34. Improved image unevenness reduction and thresholding methods for effective asphalt X-Ray CT image segmentation10.1061/(ASCE)CP.1943-5487.0000631 ↗
35. Research on local deformation property of asphalt mixture using digital image correlation10.1016/j.conbuildmat.2017.02.108 ↗
36. Synergy Effect of attapulgite, rubber, and diatomite on organic montmorillonite-modified asphalt10.1061/(ASCE)MT.1943-5533.0002601 ↗