journal article·2020-11

Improving the properties of recycled aggregate pervious pavement blocks through bio-mineralization

Mengdi Liu, Jun Xia, Chee Seong Chin, Zuowei Liu

Publisher page

Abstract

Abstract Pervious concrete (PC) comprised of cement, water, coarse aggregates are widely used nowadays for sustainable and low impact pavement. The primary purpose of this study is to investigate the performance enhancement of pervious concrete blocks (PCB) containing recycled coarse aggregates (RCA) through microbially induced calcium carbonate precipitation (MICP). Two types of bacterial enhancement methods were adopted, which are PCB with pre-soaked RCA using bacteria solution and PCB with bacteria added mixing water. The properties of RCA, cement paste, and PCB were measured. The water absorption of RCA soaked in the bacteria and culture medium for 21 days was reduced by 10.41%. Meanwhile, the porosity of PCB decreased by 15.70%, and compressive strength increased up to 28.48% when incorporating pre-soaked RCA. There was an increase of 57.23% in compressive strength for hardened cement paste when bacteria were added in the mixing water. The compressive strength of PCB increased by 35.48% when compared with PCB with normal mixing water. Both enhancement methods show promising results and realize the purpose of enhancing the properties of PCB containing RCA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Innovative concrete reinforcement materials · Urban Stormwater Management Solutions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. R. Zhong, Z. Leng, C. Poon, Research and application of pervious concrete as a sustainable pavement material : A state-of-the-art and state-of-the-practice review. Constr Build Mater [Internet]. 2018;183:544–53. Available from: https://doi.org/10.1016/j.conbuildmat.2018.06.131.10.1016/j.conbuildmat.2018.06.131 ↗
2. Q. Li, F. Wang, Y. Yu, Z. Huang, M. Li, Y. Guan, Comprehensive performance evaluation of LID practices for the sponge city construction : A case study in Guangxi , China. J Environ Manage [Internet]. 2019;231(October 2018):10–20. Available from: https://doi.org/10.1016/j.jenvman.2018.10.02410.1016/j.jenvman.2018.10.024 ↗
3. Aligning ancient and modern approaches to sustainable urban water management in China : Ningbo as a “ Blue-Green City ” in the “Sponge City ” campaign
4. X. Qiao, K. Liao, T.B. Randrup, Sustainable stormwater management : a qualitative case study of the Sponge Cities initiative in China. Sustain Cities Soc [Internet]. 2020;53(July 2019):101963. Available from: https://doi.org/10.1016/j.scs.2019.10196310.1016/j.scs.2019.101963 ↗
5. Development of a sustainable pervious pavement material using recycled ceramic aggregate and bio-based polyurethane binder10.1016/j.jclepro.2019.02.184 ↗
6. Effects of elevated temperature on performance of recycled coarse aggregate concrete10.1016/j.conbuildmat.2019.01.011 ↗
7. Properties of pervious concrete incorporating recycled concrete aggregates and slag10.1016/j.conbuildmat.2019.03.325 ↗
8. Implementation of a specific urban water management – Sponge City10.1016/j.scitotenv.2018.10.168 ↗
9. Preparation and performance evaluation of an innovative pervious concrete pavement10.1016/j.conbuildmat.2017.01.137 ↗
10. Permeability and Freeze-Thaw Durability of Pervious Concrete with Different Aggregate Sizes, Porosities, and Water-Binder Ratios
11. Experimental study on the relationship between permeability and strength of pervious concrete
12. Influence of aggregate size on compressive strength of pervious concrete10.1016/j.conbuildmat.2019.03.140 ↗
13. Properties of nano-silica modified pervious concrete
14. Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method10.1016/j.cemconres.2019.05.004 ↗
15. Comparison of methods for measuring infiltration rate of pervious concrete10.1016/j.conbuildmat.2020.118339 ↗
16. Improving the properties of recycled concrete aggregate with bio-deposition approach10.1016/j.cemconcomp.2018.09.012 ↗
17. Mechanical properties of silica fume concrete designed as per construction practice
18. A novel approach of biomineralization for improving micro and macro-properties of concrete10.1016/j.conbuildmat.2018.11.031 ↗
19. N. Chahal, R. Siddique, Permeation properties of concrete made with fly ash and silica fume : Influence of ureolytic bacteria. Constr Build Mater [Internet]. 2013;49:161–74. Available from: http://dx.doi.org/10.1016/j.conbuildmat.2013.08.02310.1016/j.conbuildmat.2013.08.023 ↗
20. J. Wang, H. Wu, V.W.Y. Tam, J. Zuo, Considering life-cycle environmental impacts and society ’ s willingness for optimizing construction and demolition waste management fee : An empirical study of China. J Clean Prod [Internet]. 2019;206:1004–14. Available from: https://doi.org/10.1016/j.jclepro.2018.09.17010.1016/j.jclepro.2018.09.170 ↗
21. Effects of bacterial remediation on compressive strength, water absorption, and chloride permeability of lightweight aggregate concrete10.1016/j.conbuildmat.2017.04.003 ↗
22. Effect of natural coarse aggregate type on the physical and mechanical properties of recycled coarse aggregates10.1617/s11527-009-9480-4 ↗
23. R. Wang, N. Yu, Y. Li, Methods for improving the microstructure of recycled concrete aggregate : A review. Constr Build Mater [Internet]. 2020;242:118164. Available from: https://doi.org/10.1016/j.conbuildmat.2020.11816410.1016/j.conbuildmat.2020.118164 ↗
24. Comparison of recycled aggregate treatment methods on the performance for recycled concrete10.1016/j.conbuildmat.2019.117366 ↗
25. Experimental investigation on permeability indices and strength of modified pervious concrete with recycled concrete aggregate10.1016/j.conbuildmat.2018.10.182 ↗
26. Sustainable design of pervious concrete using waste glass and recycled concrete aggregate10.1016/j.jclepro.2019.06.260 ↗
27. Properties of pervious concrete with steel slag as aggregates and different mineral admixtures as binders10.1016/j.conbuildmat.2020.119543 ↗
28. Effect of calcium–silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature10.1617/s11527-013-0062-0 ↗
29. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
30. Hydraulic and strength characteristics of pervious concrete containing a high volume of construction and demolition waste as aggregates10.1016/j.conbuildmat.2020.119251 ↗
31. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
32. A review of microbial precipitation for sustainable construction10.1016/j.conbuildmat.2015.04.051 ↗
33. Review on microbial induced calcite precipitation mechanisms leading to bacterial selection for microbial concrete10.1016/j.conbuildmat.2019.07.122 ↗
34. Review on geotechnical engineering properties of sands treated by microbially induced calcium carbonate precipitation (MICP) and biopolymers10.1016/j.conbuildmat.2020.118415 ↗
35. Using microbial carbonate precipitation to improve the properties of recycled fine aggregate and mortar10.1016/j.conbuildmat.2019.116949 ↗
36. Use of carbonate precipitating bacteria to reduce water absorption of aggregates10.1016/j.conbuildmat.2017.03.042 ↗
37. Siddique · Effect of ureolytic bacteria on concrete properties. · 2011 · 25 · 3791
38. Effect of bacteria on strength, permeation characteristics and micro-structure of silica fume concrete10.1016/j.conbuildmat.2017.03.057 ↗
39. Tests for geometrical properties of aggregates Part 1 : Determination of particle size distribution — Sieving method. BSI Stand Publ., 2012 1–22.
40. British Standards Institution, BS EN 12620:2013 Aggregates for concrete. BSI Standards Publication, 2013.
41. Use of bacteria to improve electrical resistivity and chloride penetration of air-entrained concrete10.1016/j.conbuildmat.2019.03.150 ↗
42. Surface treatment of recycled concrete aggregates through microbial carbonate precipitation10.1016/j.conbuildmat.2014.01.085 ↗
43. Modification of recycled concrete aggregate by calcium carbonate biodeposition10.1016/j.conbuildmat.2012.02.027 ↗
44. British Standards Institution, BS EN 1097-3:1998 British Standard Tests for mechanical and physical properties of aggregates, Part 3 : Determination of loose bulk. British Standard, 2002.
45. British Standards Institution, BS 812-110:1990 Testing aggregates methods for determination of aggregate crushing value, 1990.
46. Role of calcium sources in the strength and microstructure of microbial mortar10.1016/j.conbuildmat.2014.12.040 ↗
47. 522 A committee, Report on pervious concrete. American concrete institute, 2010 pp.1–42.
48. Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM Int., 2014;
49. Methods of testing cement Part 1 : Determination of strength. BSI Stand Publ., 2016;1–38.
50. Microstructural investigation of recycled aggregate concrete produced by adopting equal mortar volume method along with two stage mixing approach10.1016/j.istruc.2020.01.044 ↗
51. ASTM C1688-14, Standard test method for density and void content of freshly mixed pervious concrete, American Society for Testing and Materials, 2014.
52. Standardization Administration of the People’s Republic of China. GB/T 50081-2019 Standard for teste methods of concrete physical and mechanical properties, 2019.
53. British Standards Institution. BS EN 1338: 2003 Concrete Paving Blocks — Requirements and Test Methods, vol. 3, British Standards Institution, 2003.
54. British Standards Institution. BS EN 1339:2003 Concrete paving flags — Requirements and test methods, 2003.
55. Standardization Administration of the People’s Republic of China. GB/T 25993 Permeable paving bricks and permeable paving flags, 2010.