Optimization and mechanical-physical characterization of geopolymers with Construction and Demolition Waste (CDW) aggregates for construction products
Source abstract
Abstract
The paper presents the mechanical and physical characterization of a metakaolin-slag-fly ash-potassium silicate geopolymer mortar embedding inorganic recycled aggregates from Construction and Demolition Waste (CDW). The binder was holistically optimized to comply with the pilot plant requirements for producing architectural panels of satisfactory quality, among them: reduced viscosity, minimum open time of 1 h, use of commercial reagents, sufficient strength and limited shrinkage. Size and aspect ratio of small scale cylindrical specimens were investigated in compression, comparing the performance of tested geopolymers to available provisions for natural rocks, cement concrete and mortars. Empirical correlations between compressive and splitting tensile strength were calibrated through the results of about 130 geopolymer mixtures produced in former and current activities. Lastly, the suitability of reusing geopolymers at their end-of-life as recycled aggregates in a new geopolymer production was preliminarily assessed to explore the feasibility of a closed-loop process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Eurostat Yearbook: The Statistical Guide to Europe. Office for the Official Publications of the European Communities, Luxembourg, 2019. Online publication, data retrieved on 20 June 2019.
2. JRC Report EUR 24918 EN 2011. Supporting Environmentally Sound Decisions for Construction and Demolition (C&D) Waste Management – A practical guide to Life Cycle Thinking (LCT) and Life Cycle Assessment (LCA). European Commission Joint Research Centre (2011). doi:10.2788/54618.
3. 2013
4. Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives. Official Journal of the European Union no. L 312, 3-30.
5. Strategies for successful construction and demolition waste recycling operations10.1080/014461997373105 ↗
6. Use of recycled crushed concrete for road pavement sub-base
7. Recycled concrete as an aggregate for concrete—a review
8. Recycled aggregates and recycled aggregate concrete second state-of-the-art report developments 1945–198510.1007/BF02472036 ↗
9. Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review10.1016/j.conbuildmat.2014.07.003 ↗
10. Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete10.1061/(ASCE)0899-1561(2003)15:5(443) ↗
11. Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates10.1016/j.conbuildmat.2004.03.005 ↗
12. Short and long-term behavior of structural concrete with recycled concrete aggregate10.1016/j.cemconcomp.2013.01.003 ↗
13. Interfacial transition zones in recycled aggregate concrete with different mixing approaches10.1016/j.conbuildmat.2012.06.022 ↗
14. Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation10.1016/j.cemconcomp.2013.01.006 ↗
15. Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete10.1016/j.cemconres.2013.05.004 ↗
16. 1992
17. Properties of new and recycled clay brick aggregates for use in concrete10.1061/(ASCE)0899-1561(2005)17:4(456) ↗
18. Recycled clay brick as an aggregate for concrete: overview
19. Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges10.1016/j.conbuildmat.2019.07.112 ↗
20. Literature review of advances in materials used in development of alkali-activated mortars, concretes, and composites10.1061/(ASCE)MT.1943-5533.0002899 ↗
21. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
22. 2014
23. Geopolymer based on concrete demolition waste10.1016/j.apt.2016.03.029 ↗
24. Production of geopolymeric binder from blended waste concrete powder and fly ash10.1016/j.conbuildmat.2012.04.044 ↗
25. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
26. Use of construction and demolition waste (CDW) for alkali-activated or geopolymer cements
27. Construction wastes as raw materials for geopolymer binders
28. Alkali-activated building materials made with recycled construction and demolition wastes10.1016/j.conbuildmat.2017.05.122 ↗
29. Valorization of construction and demolition (C&D) and industrial wastes through alkali activation10.1016/j.conbuildmat.2016.06.051 ↗
30. Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers10.1016/j.apt.2014.11.012 ↗
31. Eco-efficient alkali-activated cement based on red clay brick wastes suitable for the manufacturing of building materials10.1016/j.jclepro.2017.07.243 ↗
32. Properties and microstructure of alkali-activated red clay brick waste10.1016/j.conbuildmat.2013.01.031 ↗
33. Ceramic wastes as raw materials in Portland cement clinker fabrication: characterization and alkaline activation10.3989/mc.2006.v56.i281.94 ↗
34. Synthesis and thermal behavior of geopolymer-type material from waste ceramic10.1016/j.conbuildmat.2013.08.063 ↗
35. Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings. Official Journal of the European Union no. L 153, 13–35.
36. Assessment of geopolymers with Construction and Demolition Waste (CDW) aggregates as a building material10.1016/j.conbuildmat.2018.06.018 ↗
37. Frankovič A., Ducman V., Dolenec S., Panizza M., Tamburini S., Natali M., Pappa M., Tsoutis C., Bernardi A., Up-scaling and performance assessment of façade panels produced from construction and demolition waste using alkali activation technology, Constr. Build. Mater., Submitted for publication.
38. 2014
39. EU Commission Decision of 18 December 2014 n. 2014/955/EU. Official Journal of the European Union n. L 370/44 of 30.12.2014.
40. EN 933-2. Tests for geometrical properties of aggregates. Determination of particle size distribution. Test sieves, nominal size of apertures. European Committee for Standardization (1996).
41. EN 12390-3. Testing Hardened Concrete-Part 3: Compressive strength of test specimens. European Committee for Standardization (2011).
42. EN 12390-6. Testing Hardened Concrete-Part 6: Tensile splitting strength of test specimens. European Committee for Standardization (2000).
43. EN 12390-5. Testing hardened concrete-Part 5: Flexural strength of test specimens. European Committee for Standardization (2009).
44. ASTM C20-00. Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water. ASTM International, formerly American Society for Testing and Materials (2010).
45. Ambient temperature drying shrinkage and cracking in metakaolin-based geopolymers10.1111/j.1551-2916.2012.05380.x ↗
46. Davidovits · 2011
47. EN 1990 Eurocode – Basis of structural design. European Committee for Standardization (2005).
48. Strain-softening of concrete in uniaxial compression10.1007/BF02486177 ↗
49. EN 1996-1-1 Eurocode 6 – Design of masonry structures. General rules for reinforced and unreinforced masonry structures. European Committee for Standardization (2005).
50. EN 1015-11. Methods of test for mortar for masonry-Part 11: Determination of flexural and compressive strength of hardened mortar. European Committee for Standardization (1999).
51. Concrete core strength–The effect of length to diameter ratio10.1520/JTE11631J ↗
52. Determining concrete strength by using small-diameter cores10.1680/macr.1979.31.107.91 ↗
53. Concrete strength evaluation through the use of small diameter cores10.1680/macr.1988.40.143.99 ↗
54. A proposal for the prediction of the characteristic cube strength of concrete from tests on small cores of various diameters10.1007/BF02480422 ↗
55. Distributions of compressive strength obtained from various diameter cores
56. A correction equation on the influence of length-to diameter ratio on the uniaxial compressive strength of rocks10.1016/0013-7952(86)90030-X ↗
57. Aspects of rock strength10.1007/s100640050017 ↗
58. The effect of length to diameter ratio of test specimens on the uniaxial compressive strength of rock10.1007/s10064-009-0227-9 ↗
59. The effect of specimen size on strength and other properties in laboratory testing of rock and rock-like cementitious brittle materials10.1007/s00603-011-0161-6 ↗
60. Bureau of Reclamation Concrete Manual Part 2 (9th ed.), U.S. Government Printing Office, Washington, DC (1992).
61. Neville · 1987
62. Influence of aggregate size on fracture mechanics parameters of concrete10.1016/0262-5075(87)90025-X ↗
63. S. Enterprises, Scilab: Free and Open Source software for numerical computation (OS Windows© Version 6.0.1) [Software], http://www.scilab.org, last accessed 2019/07/31.
64. Cautionary Note about R2
65. Design of quasibrittle materials and structures to optimize strength and scaling at probability tail: an apercu10.1098/rspa.2018.0617 ↗
66. Size effect in compression fracture: splitting crack band propagation
67. Z.P. Bazant, D. Novák, (2001). Nonlocal Weibull theory and size effect in failures at fracture initiation, in: Proc. of Fracture Mechanics of Concrete Structures–FraMCoS-4, Chachan-Paris (France), 659–664.
68. Validation of selected non-destructive methods for determining the compressive strength of masonry units made of autoclaved aerated concrete10.3390/ma12030389 ↗
69. Experimental investigation of concrete fracture under uniaxial compression10.1002/(SICI)1099-1484(199601)1:1<115::AID-CFM6>3.0.CO;2-U ↗
70. fib Bulletin No. 65 (2012). Model Code 2010 - Final draft, Vol. 1. Int. Federation for Structural Concrete (fib). Lausanne, Switzerland. ISBN 978-2-88394-105-2.
71. Properties of mortar using cubes, prism halves, and cylinder specimens
72. Review of the splitting-test standards from a fracture mechanics point of view10.1016/S0008-8846(00)00425-7 ↗
73. Fracture properties of geopolymer paste and concrete10.1680/macr.2011.63.10.763 ↗
74. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators10.1016/j.conbuildmat.2013.05.069 ↗
75. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗