Self-cleaning and air purification performance of Portland cement paste with low dosages of nanodispersed TiO2 coatings
Source abstract
Abstract
The strong agglomeration potential and poor re-dispersibility of nano TiO2 particles in powder form seriously affect the depollution and self-cleaning performances. The nano TiO2 particles in hydrosol form can be stably dispersed in aqueous solution, but the synthetic temperature influences the crystal pattern, stability, and hydrodynamic diameter of nano TiO2 particles. In this study, a stable and nano dispersed anatase TiO2 hydrosol is synthesized by hydrolysis of titanium isopropoxide, and the effects of synthetic temperature on physicochemical properties and stability of TiO2 hydrosol are discussed. The photocatalytic and self-cleaning performances of synthetic TiO2 hydrosol coating are characterized by the colour change rate of Rhodamine B and NOx conversion UV irradiation. Compared with a commercial nano TiO2 powder (Degussa P-25), the TiO2 hydrosol coating with very low dosages shows better photocatalytic and self-cleaning performances under the same experimental conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Aging of reflective roofs: soot deposition10.1364/AO.41.002355 ↗
2. Soiling of building envelope surfaces and its effect on solar reflectance - Part II: Development of an accelerated aging method for roofing materials10.1016/j.solmat.2013.11.028 ↗
3. Photocatalytic NOx degradation of concrete surface layers intermixed and spray-coated with nano-TiO2: Influence of experimental factors10.1016/j.cemconcomp.2017.07.022 ↗
4. Durability quantification of TiO2 surface coating on concrete and asphalt pavements10.1061/(ASCE)MT.1943-5533.0000816 ↗
5. The nox degradation performance of nano-TiO2 coating for asphalt pavement10.3390/nano10050897 ↗
6. Design and performance evaluation of the functional coating for air purification under indoor conditions10.1016/j.apcatb.2014.12.012 ↗
7. Photocatalytic coating for indoor air purification: Synergetic effect of photocatalyst dosage and silica modification10.1016/j.cej.2016.07.093 ↗
8. Indoor air purification using heterogeneous photocatalytic oxidation. Part I: Experimental study10.1016/j.apcatb.2009.09.004 ↗
9. Photocatalytic construction and building materials: From fundamentals to applications10.1016/j.buildenv.2009.01.002 ↗
10. Photocatalytic roads: From lab tests to real scale applications10.1007/s12544-012-0085-6 ↗
11. Influence of synthesis conditions on the properties of photocatalytic titania-silica composites10.1016/j.jphotochem.2018.10.040 ↗
12. Effect of pore structure on the performance of photocatalytic lightweight lime-based finishing mortar10.1016/j.conbuildmat.2018.03.106 ↗
13. Synthesis, characterization and photocatalytic activity of WO3/TiO2 for NO removal under UV and visible light irradiation10.1016/j.matchemphys.2014.07.034 ↗
14. A review on nano-TiO2 sol-gel type syntheses and its applications10.1007/s10853-011-5378-y ↗
15. Hydrothermal synthesis of TiO2 nanopowers from tetraalkylammonium hydroxide peptized sols10.1016/S0928-4931(01)00274-0 ↗
16. Photocatalytic performance of pure anatase nanocrystallite TiO2 synthesized under low temperature hydrothermal conditions10.1016/j.materresbull.2006.04.019 ↗
17. Effects on the size of nano-TiO2 powders prepared with sol-emulsion-gel method10.1016/j.powtec.2006.07.005 ↗
18. Photocatalytic degradation of rhodamine B dye with high purity anatase nano-TiO2 synthesized by a hydrothermal method10.1007/s11595-011-0275-4 ↗
19. Recent advances in TiO2-based photocatalysis10.1039/C4TA00941J ↗
20. Synthesis and characterization of nano-TiO2 via different methods
21. Stable hydrosols for TiO2 coatings10.1007/s10971-010-2301-y ↗
22. Desorption and photodegradation of methylene blue from modified sugarcane bagasse surface by acid TiO2 hydrosol10.1016/j.apsusc.2011.12.106 ↗
23. Phase-pure TiO2 nanoparticles: Anatase, brookite and rutile10.1088/0957-4484/19/14/145605 ↗
24. Sol-gel synthesis of mesoporous anatase-brookite and anatase-brookite-rutile TiO2 nanoparticles and their photocatalytic properties10.1016/j.jcis.2014.11.060 ↗
25. Comparison of aqueous photoreactions with TiO2 in its hydrosol solution and powdery suspension for light utilization10.1021/ie102584j ↗
26. Study of the stable nanocrystalline TiO2 hydrosol and its fractions10.1007/s10971-005-1311-7 ↗
27. Production of stable hydrosols of crystalline TiO2 nanoparticles synthesized at relatively low temperatures in diverse media10.1016/j.apsusc.2012.11.003 ↗
28. Hydrophobic photocatalytic composite coatings based on nano-TiO2 hydrosol and aminopropyl terminated polydimethylsiloxane prepared by a facile approach10.1016/j.matlet.2018.05.103 ↗
29. Stability of TiO2 hydrosols synthesized by hydrolysis of titanium tetraethoxide10.1016/S0927-7757(96)03958-1 ↗
30. Aging of titania hydrosols prepared via ultrasonic processing10.1134/S0020168516050162 ↗
31. Review of the progress in preparing nano TiO2: An important environmental engineering material10.1016/j.jes.2014.09.023 ↗
32. A review on synthesis of nano-TiO2 via different methods
33. Endocytosis, oxidative stress and IL-8 expression in human lung epithelial cells upon treatment with fine and ultrafine TiO2: Role of the specific surface area and of surface methylation of the particles10.1016/j.taap.2007.05.001 ↗
34. Anatase and rutile in evonik aeroxide P25: Heterojunctioned or individual nanoparticles?10.1016/j.cattod.2017.06.010 ↗
35. Photocatalyst efficiencies in concrete technology: The effect of photocatalyst placement10.1016/j.apcatb.2017.10.013 ↗
36. Dynamic light-scattering measurement comparability of nanomaterial suspensions10.1007/s11051-014-2260-2 ↗
37. Nanodispersed TiO2 hydrosol modified Portland cement paste: The underlying role of hydration on self-cleaning mechanisms10.1016/j.cemconres.2020.106156 ↗
38. Long term self-cleaning and photocatalytic performance of anatase added mortars exposed to the urban environment10.1016/j.conbuildmat.2015.08.028 ↗
39. Photocatalytic and self-cleaning activity of colored mortars containing TiO210.1016/j.conbuildmat.2013.04.038 ↗
40. Characteristics and efficiency of photocatalytic cementitious materials: Type of binder, roughness and microstructure10.1016/j.cemconres.2015.02.003 ↗
41. Field study of NOx degradation by a mineral-based air purifying paint10.1016/j.buildenv.2018.06.014 ↗
42. Preparation of thermostable highly dispersed titanium dioxide from stable hydrosols
43. Aggregation behavior of Titanium Dioxide nanoparticles in aqueous environments10.1080/01932691.2011.567886 ↗
44. Use of Gemini surfactants to stabilize TiO2 P25 colloidal dispersions10.1007/s00396-009-2133-x ↗
45. Production and characterization of a budesonide nanosuspension for pulmonary administration10.1023/A:1014276917363 ↗
46. DLS and zeta potential - What they are and what they are not?10.1016/j.jconrel.2016.06.017 ↗
47. Nanosuspension: An approach to enhance solubility of drugs10.4103/2231-4040.82950 ↗
48. Dynamic light scattering as a relative tool for assessing the molecular integrity and stability of monoclonal antibodies10.1080/02648725.2007.10648095 ↗
49. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
50. Low-temperature preparation of nanocrystalline TiO2 photocatalyst with a very large specific surface area10.1016/j.matchemphys.2005.10.003 ↗
51. Effect of Peptization on Densification and Phase-Transformation Behavior of Sol–Gel-Derived Nanostructured Titania10.1111/j.1151-2916.1994.tb05426.x ↗
52. The performance of a self-cleaning cool cementitious surface10.1016/j.enbuild.2015.06.025 ↗