journal article·2020-12

Evaluation of thermal and anti-rutting behaviors of thermal resistance asphalt pavement with glass microsphere

Yinfei Du, Mingxin Dai, Haibin Deng, Deyi Deng, Tangzhong Wei, Wei Li

Publisher page

Abstract

Abstract In this paper, glass microsphere (GM) was used to prepare thermal resistance asphalt mixture (TRAM) by replacing limestone mineral filler (LMF). The mixture was applied in the top layer of asphalt pavement to decrease the solar radiation transferring into asphalt pavement. The thermal, elastic and creep parameters of TRAM were obtained using a series of laboratory tests. Based on the above parameters, the heat transfer and rutting models of thermal resistance asphalt pavement (TRAP) were established. The results show that completely replacing LMF with GM in asphalt mixture resulted in thermal conductivity decreasing by 23.8% and specific heat capacity increasing by 10.6%. Compared with control asphalt pavement, the heat absorption of the designed pavement at the depth of 4 cm decreased by a maximum of 5.5% and the maximum temperature reduced up to 1.7 °C (at 12:00 p.m.). The cooling effect of thermal resistance pavement was verified by an indoor irradiation test. The rutting depth of the middle and bottom layers in the TRAP reduced by a maximum of 8.5% after 500 thousand times of standard axis load were applied. Due to the excellent thermal resistance effect, GM can be used to reduce the internal temperature of asphalt pavement and improve the rutting resistance of asphalt pavement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Smart Materials for Construction · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Using cool pavements as a mitigation strategy to fight urban heat island-a review of the actual developments10.1016/j.rser.2013.05.047 ↗
2. A review on solutions for improving rutting resistance of asphalt pavement and test methods10.1016/j.conbuildmat.2018.02.151 ↗
3. Using polymers to improve the rutting resistance of asphalt concrete10.1016/j.conbuildmat.2014.12.060 ↗
4. Performance investigation and sustainability evaluation of multiple-polymer asphalt mixtures in airfield pavement10.1016/j.jclepro.2018.03.208 ↗
5. Effects of high modulus asphalt binders on performance of typical asphalt pavement structures10.1016/j.conbuildmat.2013.03.035 ↗
6. Laboratory and field investigation of the feasibility of crumb rubber waste application to improve the flexibility of anti-rutting performance of asphalt pavement10.3390/ma11091738 ↗
7. Impacts of high modulus agent and anti-rutting agent on performances of airfield asphalt pavement10.1016/j.conbuildmat.2019.01.138 ↗
8. Numerical simulation of inverted pavement systems10.1061/(ASCE)TE.1943-5436.0000472 ↗
9. Cyclic heat island impacts on traditional versus pervious concrete pavement systems10.3141/2240-14 ↗
10. Evaluation of temperature reduction and pavement performance of floating beads asphalt mixture10.1080/10298436.2017.1293267 ↗
11. Effects of thermally modified asphalt concrete on pavement temperature10.1080/10298436.2017.1326234 ↗
12. The effects of hollow glass microsphere modification on the road performances and thermal performance of asphalt binder and mixture10.1016/j.conbuildmat.2019.05.183 ↗
13. Evaluation of temperature reduction and pavement performance of floating beads asphalt mixture
14. Using lightweight materials to enhance thermal resistance of asphalt mixture for cooling asphalt pavement
15. Comparison and analysis on heat reflective coating for asphalt pavement based on cooling effect and anti-skid performance10.1016/j.conbuildmat.2015.04.043 ↗
16. Laboratorial investigation on optical and thermal properties of cool pavement nano-coatings for urban heat island mitigation10.1016/j.buildenv.2018.10.017 ↗
17. Analysis on environmental thermal effect of functionally graded nanocomposite heat reflective coatings for asphalt pavement10.3390/coatings9030178 ↗
18. A black near-infrared reflective coating based on nano-technology10.1016/j.enbuild.2019.109523 ↗
19. A new water-retaining paver block for reducing runoff and cooling pavement10.1016/j.jclepro.2018.07.250 ↗
20. Experimental investigation on the influence of evaporative cooling of permeable pavements on outdoor thermal environment10.1016/j.buildenv.2018.05.033 ↗
21. A new structure of permeable pavement for mitigating urban heat island10.1016/j.scitotenv.2018.04.041 ↗
22. Effects of microencapsulated phase change materials on the performance of asphalt binders10.1016/j.renene.2018.08.062 ↗
23. Laboratory investigation of phase change effect of polyethylene glycol on asphalt binder and mixture performance10.1016/j.conbuildmat.2019.03.308 ↗
24. Thermal and rheological performance of asphalt binders modified with expanded graphite/polyethylene glycol composite phase change material (EP-CPCM)10.1016/j.conbuildmat.2018.11.011 ↗
25. Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder10.1016/j.conbuildmat.2018.02.167 ↗
26. Analysis of thermoregulation indices on microencapsulated phase change materials for asphalt pavement10.1016/j.conbuildmat.2019.03.014 ↗
27. Pavement temperature prediction: theoretical models and critical affecting factors10.1016/j.applthermaleng.2019.113755 ↗
28. Linearity between pavement thermophysical properties and surface temperatures10.1061/(ASCE)MT.1943-5533.0002890 ↗
29. Study on cooling effect and pavement performance of thermal-resistant asphalt mixture10.1155/2018/6107656 ↗
30. Incorporating hollow glass microsphere to cool asphalt pavement: preliminary evaluation of asphalt mastic
31. G.Y. Li, X.M. Huang. Application of ABAQUS finite element software in road engineering. Southeast University Press, Jiangsu, China.
32. Experimental analysis of thermal conductivity of semi-rigid base asphalt pavement10.1080/14680629.2018.1431147 ↗
33. JTG E20-2011, Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering, (2011).
34. Measurements of thermal conduction in partially saturated specimens using the transient hot-disk technique10.1520/JTE103189 ↗
35. Zeng · 1990
36. Criteria for controlling rutting of asphalt concrete materials in sloped pavement10.1016/j.conbuildmat.2012.04.003 ↗
37. A novel strategy of inducing solar absorption and accelerating heat release for cooling asphalt pavement10.1016/j.solener.2017.10.086 ↗
38. Bidirectional heat induced structure of asphalt pavement for reducing pavement temperature10.1016/j.applthermaleng.2014.10.011 ↗
39. Hughes · 2005
40. Influence of the properties of filler on high and medium temperature performances of asphalt mastic10.1016/j.conbuildmat.2016.05.041 ↗