journal article·2020-11

Correlating the asphalt-binder high-temperature properties (DSR) to HMA permanent deformation (RLPD) and field rutting: A laboratory-field study

Lubinda F. Walubita, Enad Mahmoud, Luis Fuentes, Adrianus Prakoso, Sang I. Lee, Mena Souliman, Julius J. Komba

Publisher page

Abstract

Abstract Asphalt-binders are part of the key material constituents affecting the performance of hot-mix asphalt (HMA), and ultimately, the field performance of flexible pavement structures. Quite often, it is desired/useful to predict the HMA permanent deformation (viscoelastic) properties and field rutting from the asphalt-binder properties. Using the Texas flexible pavements and overlays database, namely the Texas Data Storage System (DSS), as the data source, this laboratory-field study was conducted to correlate the asphalt-binder properties to HMA permanent deformation (viscoelastic) properties and field HMA-layer rutting performance of in-service highway sections. Data extracted from the Texas DSS included asphalt-binder high-temperature rheological properties measured using the dynamic shear Rheometer (DSR) test, HMA permanent deformation (PD) and viscoelastic properties from the repeated load permanent deformation (RLPD) test, and field rut depth (RD) data for the HMA layers of in-service highway test sections. Two Texas asphalt-binder types, four HMA mixes, and four in-service field highway sections were used in the study. For some parametric comparisons, the corresponding results indicated good statistical correlations among the asphalt-binders, HMA mixes, and field rutting performance, with a coefficient of determination (R2) over 60%. Overall, the study findings indicated that the HMA PD properties and field HMA-layer rutting can be predicted from the asphalt-binder high-temperature rheological properties, with a linear or logarithmic model, to an accuracy exceeding 60%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Comparing different rutting specification parameters using high temperature characteristics of rubber-modified asphalt binders10.1080/14680629.2015.1063533 ↗
2. Evaluation of wheel tracking and field rutting susceptibility of dense bituminous mixes
3. Evaluation of asphalt binder rutting parameters10.1016/j.conbuildmat.2018.04.058 ↗
4. L.F. Walubita, G. Das, E. Espinoza, J. Oh, T. Scullion, S.I. Lee, J.L. Garibay, S. Nazarian, I. Abdallah, Texas Flexible Pavements and Overlays: Year 1 Report - Test Sections, Data Collection, Analyses, and Data Storage System. Technical Report: FHWA/TX-12/0-6658-1, Texas Transportation Institute, Texas A&M University, College Station, TX 77843-3155, 2012.
5. L.F. Walubita, S.I. Lee, J. Zhang, A.N. Faruk, S. Nguyen, T. Scullion, HMA Shear Resistance, Permanent Deformation, and Rutting Tests for Texas Mixes: Year-1 Report. Technical Report: FHWA/TX-13/0-6744-1, Texas A&M Transportation Institute, College Station, Texas 77843-3135, 2014.
6. L.F. Walubita, R. Hassan, S.I. Lee, A.N. Faruk, M. Flores, T. Scullion, I. Abdallah, S. Nazarian, Data Collection and Population of the Database (The DSS and RDSSP). Technical Report: FHWA/TX-12/0-6658-P5, Texas Transportation Institute, Texas A&M University, CS, TX 77843-3135, 2014.
7. Sensitivity analysis and validation of the Simple Punching Shear Test (SPST) for screening HMA mixes10.1016/j.conbuildmat.2018.02.198 ↗
8. The Hamburg Rutting Test (HWTT) alternative data analysis methods and HMA screening criteria10.1007/s42947-019-0014-3 ↗
9. Comparative evaluation of five HMA rutting-related laboratory test methods relative to field performance data: DM FN, RLPD, SPST, and HWTT10.1016/j.conbuildmat.2019.04.250 ↗
10. Influence of Asphalt-Binder Source on CAM Mix Rutting and Cracking Performance: A Laboratory Case Study
11. AASHTO · 2009
12. AASHTO · 2010
13. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance - A laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
14. L.F. Walubita, T. Scullion, S.I. Lee, A.N.M. Faruk, S. Nazarian, I. Abdallah, Texas Flexible Pavements and Overlays: Year 5 Report - Complete Data Documentation. Technical Report: FHWA/TX-15/0-6658-3, Texas A&M Transportation Institute, College Station, Texas 77843-3135, 2017.
15. S. Dreessen, J.P. Planche, V. Gardel, A new performance related test method for rutting prediction: MSCRT, in: Advanced Testing and Characterization of Bituminous Materials, CRC Press, 2009: pp. 971–980. doi:10.1201/9780203092989.ch93.10.1201/9780203092989.ch93 ↗
16. BitVal - Analysis of Available Data for Validation of Bitumen Tests. Phase 1 Report, FEHRL, 2005.
17. Witczak, M. W., Von Quintas, H., and Schwartz, C. W. (1997). “Superpave support and performance models management: Evaluation of the SHRP performance models system.” Proc., Eighth Int. Conf. on Asphalt Pavements, Vol. III, 175–195.
18. Strategic Highway Research Program Binder Rheological Parameters: Background and Comparison with Conventional Properties
19. Evaluation of Rutting Parameters of Asphalt Binder Based on Rheological Test10.7763/IJET.2014.V6.660 ↗
20. Refinement of the Superpave Specification Parameter for Performance Grading of Asphalt10.1061/(ASCE)0733-947X(2001)127:5(357) ↗
21. D’Angelo · 2010 · 1
22. Superpave binder tests and specification: How have they performed in the real world?
23. Revision of the Superpave high temperature binder specification: The multiple stress creep recovery test
24. Why do we need to Change G*/sin δ and How?
25. R. Delgadillo, D.W. Cho, H. Bahia, Nonlinearity of repeated creep and recovery binder test and relationship with mixture permanent deformation, Transportation Research Record 1962. Transportation Research Board (2006) 2–11.10.1177/0361198106196200101 ↗
26. A. Golalipour, Modification of Multiple Stress Creep and Recovery Test Procedure and Usage in Specification, Master thesis, University of Wisconsin, 2011.
27. M.G. Bouldin, R. Dongré, J. D’Angelo, Proposed Refinement of Superpave High-Temperature Specification Parameter for Performance-Graded Binders, Transportation Research Record 1766. Transportation Research Board, Washington, DC (2001) 40–47. doi:10.3141/1766-06.10.3141/1766-06 ↗
28. How Good Are Linear Viscoelastic Properties of Asphalt Binder to Predict Rutting and Fatigue Cracking?10.1361/105994999770346747 ↗
29. Haas · 1994
30. Permanent deformation and deflection relationship from pavement condition assessment10.1016/j.ijprt.2017.03.005 ↗
31. Effects of morphological characteristics of aggregate particles on the mechanical behavior of bituminous paving mixtures10.1016/j.conbuildmat.2016.07.013 ↗
32. Evaluation of a highly-modified asphalt binder for field performance10.1016/j.conbuildmat.2018.03.188 ↗
33. Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation10.1016/j.conbuildmat.2013.03.013 ↗
34. F. Zhou, E.G. Fernando, T. Scullion, Development, Calibration, and Validation of Performance Prediction Models for the Texas M-E Flexible Pavement Design System. Technical Report: FHWA/TX-10/0-5798-2, Texas A&M Transportation Institute, College Station, Texas 77843-3135, 2010.
35. Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test10.1520/JTE101732 ↗
36. Yinfei, D., Jiaqi, C., Zheng, H., and Weizheng, L. A review on solutions for improving rutting resistance of asphalt pavement and test methods. Construction and Building Materials. Volume 168, 20, Pages 893-905.10.1016/j.conbuildmat.2018.02.151 ↗
37. Effects of morphological characteristics of aggregate particles on the mechanical behavior of bituminous paving mixtures10.1016/j.conbuildmat.2016.07.013 ↗
38. Effects of high friction aggregate and PG Plus binder on rutting resistance of hot mix asphalt mixtures10.1080/10298436.2015.1065996 ↗
39. The effect of aggregate gradation on creep and moisture susceptibility performance of warm mix asphalt10.1080/10298436.2012.752824 ↗
40. Contribution of the Bituminous Mortar and Stone Skeleton to the Resistance to Permanent Deformation in Asphalt Mixtures10.1520/JTE000315 ↗
41. D. Sybilski, H. Soenen, M. Gajewski, E. Chailleux, W. Bankowski, Binder testing. In: Advances in interlaboratory testing and evaluation of bituminous materials, Springer, Dordrecht, 2013, pp. 15–8310.1007/978-94-007-5104-0_2 ↗
42. Soenen, H., Visscher, De Tanghe, J., Vanelstraete, T., and Per Redelius, Per, A. 2006. Selection of binder performance indicators for asphalt rutting based on traixial and wheel tracking tests. Asphalt Paving Technology: Journal of Association of Asphalt Paving Technologists: Proceedings of the Technical Sessions, Savannah Georgia, United States, March 2006.
43. Mturi, G.A.J., Komba, J., Zoorob, S.E., and Viljoen, Q. 2015. Ranking rutting performance of bituminous binders in asphalt specimens using linear viscoelastic properties. Proceedings of the 11th Conference on Asphalt Pavements for Southern Africa, 16-19 August 2015, Sun City, South Africa, 2015.
44. Anderson, D.A., Christensen, D.W., Bahia, H.U., Dongre, R., Sharma, M.G., Antle, C.E. and Button, J. 1994. SHRP-A-369: Binder Characterization and Evaluation, Volume 3: Physical Characterization, Chapter 1: Linear Viscoelastic Model, Washington D.C.: Strategic Highway Research Program, National Research Council.
45. Bahia · 2001 · 2001
46. Chen. J.S and Tsai, C.J. 1999. How good are linear viscoelastic properties of asphalt binder to predict rutting and fatigue cracking?, Journal of Materials Engineering and Performance, Vol. 8 (4), pp. 443-449, 1999.10.1361/105994999770346747 ↗
47. Abdulmajeed, S.G., and Muniandy, R. 2017. The effect of binder and temperature differential on the rutting performance of hot mix asphalt. International Journal of Applied Engineering Research. Vol 12 (17), pp. 6841 – 6852, 2017.
48. Junaid, M., Irfan, M., Ahmed, S., and Ali, Y. 2018. Effect of binder grade on performance parameters of asphaltic concrete paving mixtures. International Journal of Pavement Research and Technology, Vol. 11, pp. 435-444, 2018.10.1016/j.ijprt.2017.11.006 ↗
49. Zou, G., Xu, J. and Wu, C. 2017. Evaluation of factors that affect rutting resistance of asphalt mixesby orthogonal experiment design. . International Journal of Pavement Research and Technology, Vol. 10, pp. 282-288, 2017.10.1016/j.ijprt.2017.03.008 ↗
50. Relationship between Asphalt Binder Parameters and Asphalt Mixture Rutting10.1177/0361198119842129 ↗
51. Effect of Polymer Modification on Rheological Properties of Asphalt
52. Effects of exposure time and temperature in aging test on asphalt binder properties
53. G. Nsengiyumva, “Development of Semi-Circular Bending (SCB) Fracture Test for Bituminous Mixtures,” University of Nebraska
54. L.F. Walubita et al. (2020). Correlating the HWTT laboratory test data to field rutting performance of in-service highway sections. Construction and Building Materials, 236, 117552 (2020) https://doi.org/10.1016/j.conbuildmat.2019.117552.10.1016/j.conbuildmat.2019.117552 ↗
55. L. F. Walubita et al. (2012). Hot-mix asphalt permanent deformation evaluated by Hamburg wheel tracking, dynamic modulus, and repeated load tests. Transportation Research Record: Journal of the Transportation Research Board, (2296), 46-56 (2012).10.3141/2296-05 ↗
56. L. F. Walubita, Faruk, A. N., Zhang, J., Komba, J. J., Esra’a, I. A., & Simate, G. S. (2019). The Hamburg Rutting Test (HWTT) alternative data analysis methods and HMA screening criteria.International Journal of Pavement Research and Technology,12(1), 110-116 (2019).10.1007/s42947-019-0014-3 ↗
57. L.F. Walubita, Hoeffner, J., & Scullion, T. (2012).New Generation Mix-Designs: Laboratory-Field Testing and Modifications to Texas HMA Mix-Design Procedures(No. FHWA/TX-13/0-6132-3). Texas. Dept. of Transportation. Research and Technology Implementation Office. TX, USA. http://tti.tamu.edu/documents/0-6132-3.pdf.