Effects of basalt fiber coated with different sizing agents on performance and microstructures of asphalt mixture
Source abstract
Abstract
Abstract Basalt fiber (BF) presents remarkable capability to enhance the performance of asphalt mixture. However, this enhancing effect is highly relied on the sizing agent coated on the basalt fiber during the production process. To further understand the effects of BF coated with different sizing agents on performance and microstructures of asphalt mixture, chopped BF coated with Polyvinyl acetate emulsion (PAE), Polyester emulsion (PE), and Polyalcohol ester emulsion (PEE), respectively were utilized to prepare the corresponding asphalt mixture samples. Then, the performance of the asphalt mixture was evaluated by wheel tracking test, low temperature bending beam test, freeze–thaw splitting test and four-point bending beam fatigue test, and the crack width of the fracture sections of asphalt mixture was quantitatively analyzed by scanning electron microscope (SEM). The surface morphology, chemical compositions, and surface energy of BF coated with the three types of sizing agents were analyzed by SEM, X-ray energy spectrum and optical contact angle measuring instrument, respectively. The results showed that compared with the neat asphalt mixture, high temperature deformation resistance, low temperature crack resistance, fatigue resistance of the asphalt mixture with BF-PAE, BF-PE and BF-PEE were improved greatly. Furthermore, the type of sizing agent did present a significant impact on the performance of asphalt mixture, and BF-PAE presented the best enhancement capability, followed by BF-PEE and BF-PE. Besides, crack width of asphalt mixture with BF was only 1/3–1/6 of that of the neat mixture, of which the mixture with BF-PAE was the narrowest. Though BF with different sizing agents had similar surface morphologies, distinct changes can be observed in the surface energy, indicating different sizing agents possessed different adhesive properties with asphalt binders. Therefore, it is necessary to select a suitable sizing agent or to develop a customized one to improve the performance of asphalt mixture with BF more effectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Board · 2015
2. Investigation of usability of basalt fibers in hot mix asphalt concrete10.1016/j.conbuildmat.2013.04.048 ↗
3. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
4. Fiber-reinforced asphalt-concrete – A review10.1016/j.conbuildmat.2009.11.009 ↗
5. Mechanical performance of fibers in hot mix asphalt: A review10.1016/j.conbuildmat.2018.12.171 ↗
6. X.Q. Hu China's pure natural continuous basalt fiber suddenly emerged [N] China Building Materials News 2006–08-17(003).
7. Kateryna Krayushkina Olegas Prentkovskis Andrii Bieliatynskyi Johny Gigineishvili Aleksandra Skrypchenko Alfredas Laurinavičius Kasthurirangan Gopalakrishnan Jurijus Tretjakovas Perspectives on using basalt fiber filaments in the construction and rehabilitation of highway pavements and airport runways 11 1 2016 77 83 https://bjrbe-journals.rtu.lv/article/view/bjrbe.2016.0910.3846/bjrbe.2016.09 ↗
8. Bradley J. Putman Serji N. Amirkhanian Utilization of waste fibers in stone matrix asphalt mixtures Resources, Conservation and Recycling 42 3 2004 265 274 https://linkinghub.elsevier.com/retrieve/pii/S092134490400064310.1016/j.resconrec.2004.04.005 ↗
9. Yuan Zhao Chen Zhen Xia Li Study of Road Property of Basalt Fiber Asphalt Concrete AMM 238 22 25 10.4028/www.scientific.net/AMM.238 10.4028/www.scientific.net/AMM.238.22 https://www.scientific.net/AMM.238 https://www.scientific.net/AMM.238.2210.4028/www.scientific.net/AMM.238.22 ↗
10. Zhao Hui Liu Chang Yu Chen Ren Jie Qin Xin Te Zou Research to Performance of Basalt Fibre Strengthen SBS Modified Asphalt Mixture AMR 446-449 191 195 10.4028/www.scientific.net/AMR.446-449 10.4028/www.scientific.net/AMR.446-449.191 https://www.scientific.net/AMR.446-449 https://www.scientific.net/AMR.446-449.19110.4028/www.scientific.net/AMR.446-449.191 ↗
11. Yuan Xun Zheng Ying Chun Cai Ya Min Zhang Laboratory Study of Pavement Performance of Basalt Fiber-Modified Asphalt Mixture AMR 266 175 179 10.4028/www.scientific.net/AMR.266 10.4028/www.scientific.net/AMR.266.175 https://www.scientific.net/AMR.266 https://www.scientific.net/AMR.266.17510.4028/www.scientific.net/AMR.266.175 ↗
12. C. Celauro F.G. Praticò Asphalt mixtures modified with basalt fibres for surface courses Construction and Building Materials 170 2018 245 253 https://linkinghub.elsevier.com/retrieve/pii/S095006181830541510.1016/j.conbuildmat.2018.03.058 ↗
13. Yuanxun Zheng Yingchun Cai Guanghai Zhang Hongyuan Fang Fatigue property of basalt fiber-modified asphalt mixture under complicated environment J. Wuhan Univ. Technol.-Mat. Sci. Edit. 29 5 2014 996 1004 http://link.springer.com/10.1007/s11595-014-1033-110.1007/s11595-014-1033-1 ↗
14. Experimental evaluation of the basalt fibers and diatomite powder compound on enhanced fatigue life and tensile strength of hot mix asphalt at low temperatures10.1016/j.conbuildmat.2017.06.175 ↗
15. Using ESEM to analyze the microscopic property of basalt fiber reinforced asphalt concrete10.1016/j.ijprt.2017.09.010 ↗
16. Investigating the Effects of Chopped Basalt Fiber on the Performance of Porous Asphalt Mixture
17. Experimental investigation on the performance of asphalt binders reinforced with basalt fibers10.1007/s41062-018-0182-z ↗
18. Characterization of asphalt mastics reinforced with basalt fibers10.1016/j.conbuildmat.2017.11.012 ↗
19. Yongchun Cheng Wensheng Wang Yafeng Gong Shurong Wang Shuting Yang Xun Sun Comparative Study on the Damage Characteristics of Asphalt Mixtures Reinforced with an Eco-Friendly Basalt Fiber under Freeze-thaw Cycles Materials 11 12 2488 10.3390/ma11122488 http://www.mdpi.com/1996-1944/11/12/248810.3390/ma11122488 ↗
20. Laboratory Evaluation of Abrasion Resistance of Portland Cement Pervious Concrete
21. Experimental study on the effect of basalt and glass fibers on behavior of open-graded friction course asphalt modified with nano-silica10.1016/j.conbuildmat.2019.04.010 ↗
22. Technical guideline for construction of asphalt pavement with basalt fiber [S]
23. Standard specification for construction of asphalt pavement with basalt fiber [S]
24. Preparation of carbon fibers coated with epoxy sizing agents containing degradable acetal linkages and synthesis of carbon fiber-reinforced plastics (CFRPs) for chemical recycling10.1038/s41428-019-0202-7 ↗
25. Sizing agent on the carbon fibers surface and interface properties of its composites10.1007/s12221-015-0657-x ↗
26. Flame-Retardancy Properties of Intumescent Ammonium Poly(Phosphate) and Mineral Filler Magnesium Hydroxide in Combination with Graphene
27. Silane coupling agent on rheological performance of basalt fiber-reinforced asphalt mucilage10.1080/10916466.2017.1303713 ↗
28. Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: From macro-mechanical performance to micro-interfacial mechanism10.1016/j.conbuildmat.2018.05.192 ↗
29. Effect of fiber length and surface treatment on the performance of fiber-modified binder10.1016/j.conbuildmat.2020.118702 ↗
30. Technical Specification for Construction of Highway Asphalt Pavements [S]. JTG F40-2004, Occupation Standard of the People’s Republic of China.
31. Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering [S]. JTG E20-2011, Occupation Standard of the People’s Republic of China.
32. Calculation of interfacial tension in polymer systems10.1002/polc.5070340105 ↗
33. Surface tension properties of surface-coatings for application in biodiagnostics determined by contact angle measurements10.1016/S0927-7765(03)00085-7 ↗
34. Analysis of different approaches for evaluation of surface energy of microbial cells by contact angle goniometry10.1016/S0001-8686(02)00004-0 ↗
35. Critical evaluation of the surface energy components of solids10.1016/j.colsurfa.2006.10.006 ↗
36. Factorial design approach to assess the effect of fiber–matrix adhesion on the IFSS and work of adhesion of carbon fiber/polysulfone-modified epoxy composites10.1007/s42823-019-00039-7 ↗
37. Effect of basalt fiber on the low-temperature performance of an asphalt mixture in a heavily frozen area10.1016/j.conbuildmat.2020.119080 ↗