Experimental investigation on chloride-ion penetration resistance of slag containing fiber-reinforced concrete under drying-wetting cycles
Source abstract
Abstract
Abstract The corrosion of reinforcing steel is a major problem of concrete structures, particularly those exposed to chloride environment. In this study, slag was incorporated as cement replacement in various types of fiber-reinforced concrete, and the chloride penetration resistance of the concrete was investigated. The specimens were exposed to drying-wetting conditions and the chloride ion content was determined via potentiometric titration. The results show that the apparent chloride diffusion coefficient decreases with an increase in exposure time, following an exponential relationship. Slag has a positive effect on the chloride penetration resistance of the concrete, and an optimal dosage of slag exists. The effect of macrofibers on the resistance of concrete to chloride ion penetration depends on the macrofiber material; steel fibers can improve the chloride ion penetration resistance of concrete, whereas macrofibers made of polypropylene exacerbate chloride ion penetration. The effects of microfibers are related to its type and volume fraction: A lower volume fraction is favorable, whereas a higher volume fraction weakens the resistance of concrete against chloride-ion penetration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Cover cracking of reinforced concrete due to rebar corrosion induced by chloride penetration10.1016/j.cemconres.2011.04.008 ↗
2. Critical chloride content in reinforced concrete: a review10.1016/j.cemconres.2009.08.006 ↗
3. Effect of chemical composition of slag on chloride penetration resistance of concrete10.1016/j.cemconcomp.2013.11.003 ↗
4. Effect of curing environments on strength, porosity and chloride ingress resistance of blast furnace slag cement concretes: A construction site study10.1016/j.conbuildmat.2012.06.052 ↗
5. A study on durability properties of high-performance concretes incorporating high replacement levels of slag10.1617/s11527-007-9260-y ↗
6. Performance of slag concrete in marine environment
7. fib Model Code for Service Life Design, fib Bulletin 34. fédération international du béton, 2006, pp. 116. https://doi.org/10.35789/fib.BULL.0034.10.35789/fib.BULL.0034 ↗
8. Experimental study on the resistance of basalt fibre-reinforced concrete to chloride penetration10.1016/j.conbuildmat.2019.06.211 ↗
9. Rapid chloride permeability test for durability studies on glass fibre reinforced concrete
10. Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State-of-the-Art10.1016/j.cemconres.2015.10.006 ↗
11. Chloride diffusion in steel fibre reinforced marine concrete10.1016/0008-8846(87)90002-0 ↗
12. R. Roque, N. Kim, B. Kim, G. Lopp. Durability of fiber-reinforced concrete in Florida environments. Tech. Rep. July, University of FLORIDA. Tallahassee, FL, 2009.
13. M. Abrycki, A. Zajdzinski. Effect of fibres on corrosion of steel reinforcement. Master of Science Thesis Tech. Rep. Chalmers University of Technology. 2012.
14. T. Teruzzi, E. Cadoni, G. Frigeri, S. Cangiano, G.A. Plizzari. Durability aspects of steel fibre reinforced concrete. 6th RILEM Symposium on Fibre-Reinforced Cocnretes (FRC) - BEFIB2004, no. September, Varenna, Italy - September 20-22 2004, pp. 625–634.
15. Durability performance of plain and fiber reinforced self-compacting concrete
16. Durability of steel fiber reinforced self-compacting concrete10.1016/j.conbuildmat.2015.01.061 ↗
17. Combined effects of supplementary cementitious materials (silica fume, GGBS, fly ash and rice husk ash) and steel fiber on the hardened properties of recycled aggregate concrete10.1016/j.conbuildmat.2020.120636 ↗
18. Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers10.1016/j.cemconcomp.2016.08.007 ↗
19. Durability of slag waste incorporated steel fiber-reinforced concrete in marine environment
20. R. Daniel, T. Paulus. Construction Materials. Lock Gates and Other Closures in Hydraulic Projects. 2019, pp.825–858. https://doi.org/10.1016/b978-0-12-809264-4.00013-6.10.1016/B978-0-12-809264-4.00013-6 ↗
21. Oxyfibre. Applications & Projects. [WWW Document]. https://www.oxyfibre.com/applications-projects, (accessed by 11.5.2020).
22. Crank · 1979
23. ACI Committee 365. Service-life prediction: state of the art report. Manual of concrete practice, Part 5. American Concrete Institute, 2000.
24. Chloride diffusion in partially saturated cementitious material10.1016/S0008-8846(02)00939-0 ↗
25. Chloride profile modeling contemplating the convection zone based on concrete structures present for more than 40 years in different marine aggressive zones10.1016/j.conbuildmat.2018.11.271 ↗
26. Procedure for calculating the chloride diffusion coefficient and surface concentration from a profile having a maximum beyond the concrete surface10.1617/s11527-015-0543-4 ↗
27. Time dependent chloride diffusion coefficient in concrete10.1007/s11595-013-0685-6 ↗
28. Prediction of long term chloride concentration in concrete10.1007/BF02473426 ↗
29. S. Helland. Assessment and prediction of service life for marine structures—A tool for performance based requirement? Proc., 2nd Dura Net Workshop: “Design of Durability of Concrete,” CEN TC104, World Publishing Corporation, Berlin (1999) 56–58.
30. DuraCrete. Probabilistic performance based durability design of concrete structures. Document BE95-1347/R17 of the European Union-Brite EuRam III, Lyngby, Denmark (2000).
31. E.C. Bentz, M.D.A. Thomas. Life-365 service life prediction model: Computer program for predicting the service life and life-cycle costs of reinforced concrete exposed to chlorides, American Concrete Institute, Cleveland, (2001) 7–11.
32. Service life prediction of concrete wharves with early-aged crack: Probabilistic approach for chloride diffusion10.1016/j.strusafe.2008.03.004 ↗
33. ASTM C150, Standard Specification for Portland Cement, ASTM International, West Conshohocken, United States, 2016.
34. ASTM C989, Standard Specification for Slag Cement for Use in Concrete and Mortars, ASTM International, West Conshohocken, United States, 2017.
35. CECS 13-2009, Standard Test methods for fiber reinforced concrete, China planning press, Beijing, China, 2010.
36. AASHTO T 259, Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration, American Association of State and Highway Transportation Officials, Washington, DC, 2002.
37. NT Build 443-94 Concrete, hardened: Accelerated chloride penetration, NORDTEST Tekniikantie 12, FIN-02150 ESPOO, FINLAND, 1995.
38. JTJ270-98, Testing Code of Concrete for Port and Waterwog Engineering, Ministry of Transport of the People’s Republic of China, Beijing, China, 1999.
39. Experimental analysis of chloride penetration into concrete subjected to drying-wetting cycles10.1061/(ASCE)MT.1943-5533.0001304 ↗
40. Mathematical modeling of a concrete surface “Skin Effect” on diffusion in chloride contaminated media10.1016/S1065-7355(97)00002-3 ↗
41. P.B. Bamforth, W.F. Price, M. Emerson. An international review of chloride ingress into structural concrete. Transport Research Laboratory, Taywood Engineering Ltd., Contractor Report (Trl 359) (1997) 95–114.
42. Effect of nano-silica on the mechanical and transport properties of lightweight concrete10.1016/j.conbuildmat.2015.02.026 ↗
43. Surface corrosion of steel fibre reinforced concrete10.1016/j.cemconres.2009.10.001 ↗
44. Chloride ion penetration in reinforced concrete and steel fiber-reinforced concrete precast tunnel lining segments
45. Numerical simulation of polypropylene fibres in concrete materials under fire conditions10.1016/j.compstruc.2015.03.012 ↗
46. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
47. Impact resistance of poly(vinyl alcohol) fiber reinforced high-performance organic aggregate cementitious material10.1016/j.cemconres.2009.09.006 ↗
48. Cracking control of concretes modified with short AR-glass fibers at early age. Experimental results on standard concrete and SCC10.1016/j.cemconres.2007.08.019 ↗
49. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
50. Rapid chloride permeability test of polypropylene and glass fiber reinforced concrete
51. Durability, physical and mechanical properties of fiber reinforced concretes at low-volume fraction10.1016/j.conbuildmat.2014.09.058 ↗
52. The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete10.1016/S0008-8846(00)00479-8 ↗
53. Calculation of chloride ion diffusion in glass and polypropylene fiber-reinforced concrete10.1016/j.conbuildmat.2019.04.246 ↗
54. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review10.1007/s10924-006-0042-3 ↗