journal article·2021-08

Effects of natural seawater mixing on the properties of alkali-activated slag binders

Jie Ren, Hongfang Sun, Kun Cao, Zhili Ren, Bo Zhou, Wenshen Wu, Feng Xing

Publisher page

Abstract

Abstract A series of experiments were conducted to investigate the effect of seawater on the properties of alkali-activated slag (AAS) binders to seek further potentiality of these binders in marine environments. The experimental results show that on the one hand, seawater may lead to increased setting time, reduced compressive strength after 3 days and a less compact microstructure. On the other hand, however, it could also slightly improve the early age strength, flexural bending strength (after 28 and 56 days) and fractural toughness, and shows almost no impact on the fluidity of AAS binders. Moreover, with the formation of some new hydration products due to seawater mixing, the water absorption and volume of permeable voids had small decreases while the capillary sorptivity obtained a small increase. The concomitant of the acceleration effect due to the presence of salts and hindrance caused by the interaction between the seawater-based alkaline activator and slag make the AAS binding system more complex compared to the distilled water mixed counterparts. The findings of this study reveal the possibility of seawater used as the mixing water for AAS binders in marine or coastal areas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Reinforced concrete deterioration caused by contaminated construction water: An overview10.1016/j.engfailanal.2020.104715 ↗
2. Naik · Sustainability of Cement and Concrete Industries · 2005
3. Suitability of sea water for mixing structural concrete exposed to a marine environment10.1016/0958-9465(95)00015-5 ↗
4. Fresh and hardened properties of seawater-mixed concrete10.1016/j.conbuildmat.2018.09.126 ↗
5. Effect of seawater for mixing and curing on structural concrete
6. Fresh and hardened properties of seawater-mixed concrete10.1016/j.conbuildmat.2018.09.126 ↗
7. Relation between activator ratio, hydration products and mechanical properties of alkali-activated slag10.1016/j.conbuildmat.2020.120940 ↗
8. Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?10.1016/j.conbuildmat.2011.12.017 ↗
9. Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements10.1016/j.jclepro.2018.02.138 ↗
10. A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
11. Sodium silicate-based, alkali-activated slag mortars: Part I Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
12. Hydration mechanisms of super sulphated slag cement10.1016/j.cemconres.2008.03.004 ↗
13. Resistance of alkali-activated slag concrete to acid attack10.1016/S0008-8846(03)00125-X ↗
14. Ambient-cured alkali-activated slag paste incorporating micro-silica as repair material: Effects of alkali activator solution on physical and mechanical properties10.1016/j.conbuildmat.2019.116911 ↗
15. Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand10.1016/j.conbuildmat.2018.11.113 ↗
16. Chloride-bearing characteristics of alkali-activated slag mixed with seawater: Effect of different salinity levels10.1016/j.cemconcomp.2020.103680 ↗
17. Thermal and mechanical properties of alkali-activated slag paste, mortar and concrete utilising seawater and sea sand10.1016/j.conbuildmat.2017.10.104 ↗
18. J. Yubin, Y. Seyoon, O. Jae. A Comparison Study for Chloride-Binding Capacity between Alkali-Activated Fly Ash and Slag in the Use of Seawater. Applied Sciences. 7(10). 971.10.3390/app7100971 ↗
19. Properties and durability of alkali-activated slag pastes immersed in sea water10.1016/j.ceramint.2012.01.024 ↗
20. Study of seawater mixed one-part alkali activated GGBFS-fly ash10.1016/j.cemconcomp.2019.103484 ↗
21. Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag10.1016/j.cemconres.2017.10.004 ↗
22. Effect of silicate activator pH on the leaching and material characteristics of waste-based inorganic polymers10.1016/S0892-6875(01)00002-4 ↗
23. Constructing a novel nano-TiO2/Epoxy resin composite and its application in alkali-activated slag/fly ash pastes10.1016/j.conbuildmat.2019.117218 ↗
24. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
25. Standard test method for density, absorption, and voids in hardened concrete, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959
26. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
27. A novel TiO2/Epoxy resin composited geopolymer with great durability in wetting-drying and phosphoric acid solution10.1016/j.jclepro.2019.04.203 ↗
28. Degradation of alkali-activated slag/fly ash mortars under different aggressive acid conditions
29. Drying-induced changes in the structure of alkali-activated pastes10.1007/s10853-013-7152-9 ↗
30. Impermeability and interfacial bonding strength of TiO2-graphene modified epoxy resin coated OPC concrete
31. Effect of mixing and curing waters on the behaviour of cement pastes and concrete Part 2: Properties of cement paste and concrete10.1016/0008-8846(90)90117-G ↗
32. Effects of seawater on mechanical properties, mineralogy and microstructure of calcium silicate slag-based alkali-activated materials10.1016/j.conbuildmat.2019.03.288 ↗
33. Recent advances in chemical admixtures for improving the workability of alkali-activated slag-based material systems
34. S.D. Ramaswamy, M.A. Aziz, C.K. Murthy. Sea Dredged Sand for Concrete. Astm Special Technical Publication. 774. 1982. 11.10.1520/STP32463S ↗
35. Effects of activator content on properties, mineralogy, hydration and microstructure of alkali-activated materials synthesized from calcium silicate slag and ground granulated blast furnace slag10.1016/j.jobe.2020.101791 ↗
36. Effect of reactive MgO on hydration and properties of alkali-activated slag pastes with different activators
37. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
38. Performance evaluation and microstructure characterization of seawater and coral/sea sand alkali-activated mortars10.1016/j.conbuildmat.2020.120403 ↗
39. Strength and corrosion behavior of mortar mixed and/or cured with seawater with various fly ash replacement ratios
40. Analysis technique for restrained shrinkage of concrete containing chlorides
41. S.K. Kaushik, S. Islam. Suitability of sea water for mixing structural concrete exposed to a marine environment. Cement & Concrete Composites. 17(3). 177-185.10.1016/0958-9465(95)00015-5 ↗
42. Effect of styrene–butadiene rubber latex on mechanical properties of cementitious materials highlighted by means of nanoindentation10.1111/j.1475-1305.2008.00549.x ↗
43. Mechanical and interface bonding properties of epoxy resin reinforced Portland cement repairing mortar10.1016/j.conbuildmat.2020.120715 ↗
44. Durability of alkali-activated materials in aggressive environments: A review on recent studies10.1016/j.conbuildmat.2017.07.027 ↗
45. Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis XRD, FTIR and SEM10.1016/j.compositesb.2020.107840 ↗
46. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
47. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
48. Effects of mixing water temperatures on properties of one-part alkali-activated slag paste10.1016/j.conbuildmat.2020.121030 ↗
49. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
50. The role of alumina on performance of alkali-activated slag paste exposed to 50°C10.1016/j.cemconres.2013.09.009 ↗
51. Synthesis and characterization of the LDH hydrotalcite–pyroaurite solid-solution series10.1016/j.cemconres.2009.08.031 ↗
52. 27 Al and 25Mg solid-state magic-angle spinning nuclear magnetic resonance study of hydrotalcite and its thermal decomposition sequence10.1039/jm9930301263 ↗
53. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—Part II: Effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
54. A novel conversion process for waste slag: synthesis of a hydrotalcite-like compound and zeolite from blast furnace slag and evaluation of adsorption capacities10.1039/c0jm00518e ↗
55. Solid-Phase Synthesis of a Mineral Blockpolymer by Low Temperature Polycondensation of Alumino-Silicate Polymers: Na-poly(sialate) or Na-PS and Characteristics
56. Removal of phosphate from aqueous solution with blast furnace slag10.1016/j.jhazmat.2004.07.010 ↗