Characteristics of calcareous sand filler and its influence on physical and rheological properties of asphalt mastic
Source abstract
Abstract
Abstract The composition and properties of asphalt mastic (filler and asphalt composition) play a decisive role in the performance of the asphalt mixture. This paper aims to investigate the feasibility of using fine calcareous sand as mineral filler to prepare asphalt mixture. Calcareous sand was ground into powder with particle size less than 0.075 mm by planetary ball mill. The physical and chemical properties of calcareous sand filler was then examined and compared to that of the limestone filler, including Scanning Electron Microscope, Energy Dispersive Spectrometer, X-ray fluorescence, X-ray diffraction, and laser particle size analyzer. The penetration, softening point and viscosity of asphalt mastics containing calcareous sand filler were then investigated, and rheological properties were studied by dynamic shear rheometer (DSR). The test results indicated that calcareous sand owns similar physical properties and chemical composition to that of the limestone. The penetration and dynamic viscosity of asphalt mastics with calcareous sand filler are slightly lower than that of asphalt mastics with limestone filler. The high-temperature stability of asphalt mastics with calcareous sand filler is slightly lower than that of asphalt mastics with limestone filler, while the low-temperature performance is comparable. Overall, calcareous sand can be used as an appropriate substitute for limestone filler in asphalt mixture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Review on evolution and evaluation of asphalt pavement structures and materials10.1016/j.jtte.2020.05.003 ↗
2. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage10.1016/j.conbuildmat.2007.07.009 ↗
3. Airport asphalt pavement health monitoring system for mechanical model upda ting and distress evaluation under realistic random aircraft loads10.1016/j.conbuildmat.2019.07.174 ↗
4. Quantifying the impact of reclaimed asphalt pavement on airport asphalt surfaces10.1016/j.conbuildmat.2018.11.131 ↗
5. Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar10.1016/j.conbuildmat.2018.12.174 ↗
6. M. Rochlani, G. Canon Falla, F. Wellner, D. Wang, Z. Fan, S. Leischner, Feasibility study of waste ceramic powder as a filler alternative for asphalt mastics using the DSR, Road Mater. Pavement Des. (2020) 1–13.10.1080/14680629.2020.1778508 ↗
7. A review of the use of recycled solid waste materials in asphalt pavements10.1016/j.resconrec.2007.02.002 ↗
8. Characteristics and applications of fly ash as a sustainable construction material: a state-of-the-art review10.1016/j.resconrec.2018.04.010 ↗
9. Environmental performance and functional analysis of chip seals with recycled basic oxygen furnace slag as aggregate10.1016/j.jhazmat.2020.124441 ↗
10. Life cycle energy consumption by roads and associated interpretative analysis of sustainable policies10.1016/j.rser.2021.110823 ↗
11. Coral-reef area and the contributions of reefs to processes and resources of the world's oceans10.1038/273225a0 ↗
12. Experimental investigation on mechanical behavior and particle crushing of calcareous sand retrieved from South China Sea10.1016/j.enggeo.2020.105932 ↗
13. Long-term behaviour and degradation of calcareous sand under cyclic loading10.1016/j.enggeo.2020.105756 ↗
14. Engineering characteristics of the calcareous sand in Nansha Islands, South China Sea10.1016/j.enggeo.2011.03.011 ↗
15. Investigation of engineering characteristics of calcareous soils from fringing reef10.1016/j.oceaneng.2017.02.019 ↗
16. Particle obstruction and crushing of dredged calcareous soil in the Nansha Islands, South China Sea10.1016/j.enggeo.2019.105274 ↗
17. Physical modelling of the stability of a revetment breakwater built on reclaimed coral calcareous sand foundation in the South China sea—random waves and dense foundation10.1016/j.oceaneng.2020.108384 ↗
18. Comparative study on cyclic behavior of marine calcareous sand and terrigenous siliceous sand for transportation infrastructure applications10.1016/j.conbuildmat.2021.122740 ↗
19. J. Choudhary, B. Kumar, A. Gupta, Utilization of solid waste materials as alternative fillers in asphalt mixes: A review, Constr. Build. Mater. 234 (2020) 117271.10.1016/j.conbuildmat.2019.117271 ↗
20. Effect of sugarcane bagasse ash as filler in hot mix asphalt10.4028/www.scientific.net/MSF.846.683 ↗
21. M.N. Borhan, A. Ismail, R.A. Rahmat, A. Sciences, Evaluation of palm oil fuel ash (POFA) on asphalt mixtures, Austral. J. Basic Appl. Sci., 4(10) (2010) 5456–5463.
22. Evaluation of rice husk ash as filler in hot mix asphalt concrete10.1016/j.conbuildmat.2013.06.029 ↗
23. Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler10.1016/j.conbuildmat.2016.09.070 ↗
24. Usage of two biomass ashes as filler in hot mix asphalt10.1016/j.conbuildmat.2018.03.102 ↗
25. Fine solid wastes as a resource-conserving filler and their influence on the performance of asphalt materials10.1016/j.jclepro.2019.119929 ↗
26. Effects of steel slag fillers on the rheological properties of asphalt mastic10.1016/j.conbuildmat.2017.04.034 ↗
27. Characteristics of different types of basic oxygen furnace slag filler and its influence on properties of asphalt mastic10.3390/ma12244034 ↗
28. M. Rochlani, G.C. Falla, F. Wellner, D. Wang, S.J.R.M. Leischner, P. Design, Feasibility study of waste ceramic powder as a filler alternative for asphalt mastics using the DSR, Road Mater. Pavement Des. (2020) 1–13.10.1080/14680629.2020.1778508 ↗
29. Utilization of red mud as an alternative mineral filler in asphalt mastics to replace natural limestone powder10.1016/j.conbuildmat.2019.117821 ↗
30. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
31. M. Arabani, F.M. Nejad, A.R. Azarhoosh, Laboratory evaluation of recycled waste concrete into asphalt mixtures, Int. J. Pavement Eng. (2013).10.1080/10298436.2012.747685 ↗
32. A. Kuity, S. Jayaprakasan, A. Das, Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture, Constr. Build. Mater. 68 (2014) 637–643.10.1016/j.conbuildmat.2014.07.012 ↗
33. M. Saltan, B. Ksüz, V.E.J.S. Uz, E.o.C. Materials, Use of glass waste as mineral filler in hot mix asphalt, Sci. Eng. Compos. Mater. 22(3) (2015) 271–277.10.1515/secm-2013-0135 ↗
34. Taghipoor, Mohammad, Arabani, Mahyar, Tahami, Seyed, A.J.R. Materials, P.D.A.I. Laboratory investigation of hot mix asphalt containing waste materials, Road. Mater. Pavement Des. (2017).
35. M.o. transport, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering, China Communications Press, Beijing. (2011).
36. N.S.o.P.s.R.o. china, Test Methods of Aggregate for Highway Engineering, Ministry of Transport of the People's Republic of China. (2005).
37. Effect of particle shape on the liquefaction resistance of calcareous sands10.1016/j.soildyn.2020.106302 ↗
38. Improvements on high-temperature stability, rheology, and stiffness of asphalt binder modified with waste crayfish shell powder10.1016/j.jclepro.2020.121745 ↗
39. Investigations on viscosity and flow behavior of polyphosphoric acid (PPA) modified asphalt at high temperatures10.1016/j.conbuildmat.2019.07.336 ↗
40. ASTM D2196–18e1 · 2018
41. On the mechanical behavior of asphalt10.1016/j.mechmat.2004.09.005 ↗
42. Evaluation of aging behaviors of asphalt binders through different rheological indices10.1016/j.fuel.2018.02.087 ↗
43. Experimental investigation on aging characteristics of asphalt based on rheological properties10.1016/j.conbuildmat.2019.117158 ↗
44. Rhysiological properties of graphene nanoplatelets/rubber crowd composite modified asphalt10.1016/j.conbuildmat.2020.120505 ↗
45. Structures, complex shear modulus and phase angle of crumb rubber modified binders containing organic warm mix asphalt additives10.1617/s11527-016-0950-1 ↗
46. Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt10.1016/j.jclepro.2018.01.171 ↗
47. Research on properties of bio-asphalt binders based on time and frequency sweep test10.1016/j.conbuildmat.2018.01.048 ↗
48. Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4mm parallel plates10.1016/j.ijprt.2016.08.010 ↗
49. D. Wang, A.C. Falchetto, C. Riccardi, M.P.J.C. Wistuba, B. Materials, Investigation on the low temperature properties of asphalt binder: Glass transition temperature and modulus shift factor, Constr. Build. Mater. 245 (2020) 118351.10.1016/j.conbuildmat.2020.118351 ↗
50. New technique for measuring low-temperature properties of asphalt binders with small amounts of material10.3141/2179-03 ↗
51. Y.Q. Tan, X.Z. Shao, X.N. Zhang, Transport, Research on evaluations approach to low-temperature performance of asphalt based on rheology characteristic of low temperature, China J. Highway Transp. 15(3) (2002) 1–5.
52. J. Wang, S. Wu, J. Han, L. Xing, Rheological properties of asphalt modified by supramolecular UV resistant material-LDHs, J. Wuhan Univ. Technol.-Mater. 27(4) (2012) 805–809.10.1007/s11595-012-0552-x ↗
53. An investigation of asphalt durability: relationships between ductility and rheological properties for unmodified asphalts