Withdrawal capacity of threaded rods embedded in timber elements
Source abstract
Abstract
Abstract In the present paper, the withdrawal capacity of threaded rods embedded in timber elements is investigated using both theoretical and experimental methods. A theoretical approach based on Volkersen theory, assuming a bi-linear constitutive law is developed. Moreover, an experimental investigation of withdrawal of threaded rods from glulam elements is presented. Results for specimens covering a wide range of varying embedment lengths and rod-to-grain angles are provided. The agreement between theoretical estimations and experimental results is good. A nearly linear relation between embedment length and withdrawal capacity, predicted by the theoretical approach, is validated by the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Structural Load-Bearing Analysis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. H.J. Blaß, I. Bejtka, Reinforcements perpendicular to grain using self-tapping screws, in: Proceedings of the 8th World Conference on Timber Engineering, Lahti, Finland, 2004, pp. 233–238.
2. I. Bejtka, H.J. Blaß, Self-tapping screws as reinforcements in beam supports, in: Proceedings of the 39th CIB-W18 Meeting Florence, Italy, 2006.
3. H.J. Blaß, M. Schmid, Self-tapping screws as reinforcement perpendicular to the grain in timber connections, in: Proceedings of RILEM Symposium: Joints in Timber Structures, Stuttgart, Germany, 2001, pp. 163–172.
4. F. Lam, M. Schulte-Wrede, C.C. Yao, J.J. Gu, Moment resistance of bolted timber connections with perpendicular to grain reinforcements, in: Proceedings of the 10th World Conference on Timber Engineering, Miyazaki, Japan, 2008, pp. 978–985.
5. I. Bejtka, H.J. Blaß, Joints with inclined screws, in: Proceedings of the 35th CIB-W18 Meeting Kyoto, Japan, 2002.
6. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
7. M. Closen, F. Lam, Performance of moment resisting self-tapping screw assembly under reverse cyclic load, in: Proceedings of the 12th World Conference on Timber Engineering, Auckland, New Zealand, 2012, pp. 433–440.
8. P. Ellingsbø, K.A. Malo, Cantilever glulam beam fastened with long threaded steel rods, in: Proceedings of the 11th World Conference on Timber Engineering, Trentino, Italy, 2010, pp. 468–475.
9. K.A. Malo, P. Ellingsbø, On connections for timber bridges, in: Proceedings of the International Conference Timber Bridges (ICTB), Lillehammer, Norway, 2010, pp. 297–312.
10. Y. Wakashima, K. Okura, K. Kyotani, Development of ductile semi-rigid joints with lagscrewbolts and glued-in rods, in: Proceedings of the 11th World Conference on Timber Engineering, Trentino, Italy, 2010, pp. 3221–3228.
11. P. Ellingsbø, K.A. Malo, Withdrawal capacity of long self-tapping screws paralell to grain direction, in: Proceedings of the 12th World Conference on Timber Engineering, 2012, pp. 228–237.
12. The effect of thread geometry on screw withdrawal strength
13. Gehloff · 2011
14. U. Hübner, M. Rasser, G. Schickhofer, Withdrawal capacity of screws in European ash (Fraxinus excelsior L.), in: Proceedings of the 11th World Conference on Timber Engineering, Trentino, Italy, 2010, pp. 241–249.
15. A simple unified model for withdrawal of lag screws and glued-in rods10.1007/s00107-010-0478-y ↗
16. A simplified model for withdrawal of screws from end-grain of timber10.1016/j.conbuildmat.2011.10.066 ↗
17. S. Kennedy, A. Salenikovich, W. Munoz, M. Mohammad, Design equation for withdrawal resistance of threaded fasteners in the Canadian timber design code, in: Proceedings of the 13th World Conference on Timber Engineering, Quebec City, Canada, 2014.
18. T. Mori, M. Nakatani, Y.H. Chui, M. Gong, H. Isoda, K. Komatsu, Pull-out strength properties of lagscrewbolt connection in cross laminated timber, in: Proceedings of the 13th World Conference on Timber Engineering, Quebec City, Canada, 2014.
19. M. Nakatani, K. Komatsu, Development and verification of theory on pull-out properties of Lagscrewbolted timber joints, in: Proceedings of the 8th World Conference on Timber Engineering, Lahti, Finland, 2004, pp. 95–99.
20. G. Pirnbacher, R. Brandner, G. Schickhofer, Base parameters of self-tapping screws, in: Proceedings of the 42nd CIB-W18 meeting Dübendorf, Switzerland, 2009.
21. Investigations concerning the force distribution along axially loaded self-tapping screws
22. A. Ringhofer, G. Schickhofer, Influencing parameters on the experimental determination of the withdrawal capacity of self-tapping screws, in: Proceedings of the 13th World Conference on Timber Engineering, Quebec City, Canada, 2014.
23. Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products
24. H. Stamatopoulos, K.A. Malo, Withdrawal stiffness of threaded rods embedded in timber elements, Constr. Build. Mater., 2015, submitted for publication.10.1016/j.conbuildmat.2015.07.067 ↗
25. Die nietkraftverteilung in zugbeanspruchten nietverbindungen mit konstanten laschenquerschnitten
26. Axially loaded glued-in hardwood dowels10.1007/s002260000076 ↗
27. CEN, European Committee for Standardization, EN 1995-1-1:2004: Design of timber structures. Part 1-1: General-Common Rules and Rules for Buildings, Brussels, Belgium, 2004.
28. C. Pörtner, Untersuchungen zum Verbund zwischen eingeklebten stiftförmigen faserverstärkten Kunststoffen und Holz [Ph.D. Thesis], Kassel University, Kassel, Germany, 2005.
29. CEN, European Committee for Standardization, EN 26891:1991 (ISO 6891:1983): Timber Structures – Joints Made with Mechanical Fasteners-General Principles for the Determination of Strength and Deformation Characteristics, Brussels, Belgium, 1991.
30. CEN, European Committee for Standardization, EN 14080-2013: Timber Structures – Glued Laminated Timber and Glued Solid Timber – Requirements, Brussels, Belgium, 2013.
31. SFS intec, GmbH, Gewindestangen mit Holzgewinde als Holzverbindungsmittel, Allgemeine bauaufsichtliche Zulassung Z-9.1-777, Deutsches Institut für Bautechnik (DIBt), 2010.
32. DIN, Deutsches Institut für Normung, DIN 7998: Gewinde und Schraubenenden für Holz-schrauben, Berlin, Germany, 1975.