Perforated SIFCON blocks – An extraordinarily ductile material ideal for use in compression yielding structural systems
Source abstract
Abstract
Abstract Compression yielding (CY), an innovative structural concept, has recently been introduced to offset the ductility deficiency of concrete structures reinforced with fiber-reinforced polymer. The CY structural scheme employs a ductile material to replace concrete in the compression side of a plastic hinge, thus allowing the ductile flexural deformation of the member to be achieved through the compressive, rather than tensile, yielding of that member. The CY system makes an extraordinarily high ductility demand on the compression yielding material. Although slurry infiltrated fiber concrete (SIFCON) is a very ductile material, it is still unable to satisfy the excessive ductility demand of this system. However, through the extensive experimental testing reported in this paper, it is found that the high ductility demand of the CY material can be satisfied by providing perforations inside a SIFCON block. This paper reports the experimental testing and its results. From analyses of the test results, a methodology for the design and construction of an adequate CY block is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Naaman AE. FRP reinforcements in structural concrete: assessment, progress and prospects. In: Proceedings of the sixth international symposium on FRP reinforcement for concrete structures. Singapore: World Scientific; 2003. p. 1–24.10.1142/9789812704863_0001 ↗
2. New avenue of achieving ductility for reinforced concrete members10.1061/(ASCE)0733-9445(2006)132:9(1502) ↗
3. Ductility demand of compression yielding fiber-reinforced polymer-reinforced concrete beams
4. Liu XC, Wu YF, Leung AYT, Hou JG. Mechanical behavior of mild steel compressive yielding blocks. In: Proceedings of the first Asia–Pacific conference on FRP in structures. Hong Kong, China; 12–14 December 2007. p. 417–22.
5. Liu K, Wu YF. Compression yielding by SIFCON block for FRP-reinforced concrete beams. In: Proceedings of the first Asia–Pacific conference on FRP in structures. Hong Kong, China; 12–14 December 2007. p. 411–6.
6. Parametric space for the optimal design of compression-yielding FRP-reinforced concrete beams10.1617/s11527-009-9472-4 ↗
7. Ductility analysis of compression-yielding FRP-reinforced concrete beams10.1016/j.cemconcomp.2009.06.007 ↗
8. Wu YF, Zhou YW, He XQ. Performance-based design of compression-yielding FRP-reinforced concrete beams. Compos Struct, in press, doi:10.1016/j.compstruct.2010.06.009.10.1016/j.compstruct.2010.06.009 ↗
9. Naaman AE, Jeong SM. Structural ductility of beams prestressed with FRP tendons. In: Taerwe L, editor, Proceedings of the 2nd international symposium on non-metallic (FRP) reinforcement for concrete structures. RILEM proceedings 29. Ghent, Belgium, London: E & FN Spon; August 1995. p. 379–86.
10. Homrich JR, Naaman AE. Stress–strain properties of SIFCON in compression. Fiber reinforced concrete – properties and applications, ACI SP-105. American Concrete Institute: Detroit; 1987. p. 283–304.
11. Elastic modulus of SIFCON in tension and compression
12. Huang Y, Wu YF. Ductility of hybrid fiber reinforced concrete. In: Proceeding international symposium on innovation & sustainability of structures in civil engineering (ISISS’2005), Nanjing, China; 20–22 November 2005. p. 2314–26.
13. Mondragon R. SIFCON in compression. Fiber reinforced concrete – properties and applications, ACI SP-105. Detroit: American Concrete Institute; 1987. p. 269–81.