Effects of mixing procedures and rap sizes on stiffness distribution of hot recycled asphalt mixtures
Source abstract
Abstract
Abstract The quality of hot recycled asphalt mixture prepared by conventional laboratory procedures tends to be overestimated. This is because the long RAP preheating time, for instance 2 h at 110 °c might entirely soften RAP and coincidentally enhance the mixing between RAP and virgin materials thus the quality of hot recycled mixture. In order to manufacture the laboratory specimens that better present the quality as produced in the industrial mixing plant, this research employed the mixing method that simulates the mixing mechanism actually occurs in the asphalt mixing plant in which RAP at ambient temperature is mixed with superheated virgin aggregate at 215 °c for 2, 4, 6 and 8 min before this blend is mixed with virgin binder. The proportion of RAP in the recycled mixture is 40% and bitumen 160/220 penetration grade is used as virgin binder. Two sizes of RAP, 20 and 40 mm are used. The stiffness of recycled asphalt specimens composed of different sizes of RAP and prepared by different mixing procedure including the conventional approach is recorded and analysed. The result indicates with short mixing time, RAP tends to work as inert black rock and the complete blending situation only approached if the mixing duration significantly increased. This finding is against the premise that RAP and virgin binder are completely blending in the recycled mixture design literature. However, longer RAP/virgin aggregate mixing times could result in recycled hot asphalt mixtures with higher stiffness modulus and better homogeneity. In addition, RAP size seriously affects the level of blending hence the stiffness variation of recycled mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Thermodynamic properties of mixtures · Heat Transfer and Numerical Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ASTM-D4887-99. Standard practice for preparation of viscosity blends for hot recycled bituminous materials. American Society of Testing Materials; 2003.
2. Mixing Law for Viscosity10.1038/164799b0 ↗
3. Epps JA, Little DN, Holmgreen RJ, Terrel RL. Guidelines for recycling pavement materials. NHCRP 224. National Highway Cooperative Research Program, USA; 1980.
4. Chaffin JM, Davidson RR, Glover CJ, Bullin JA. Viscosity mixing rules for asphalt recycling. Transportation research record 1501. Transportation Research Board, National Research Council, Washington, DC; 1995. p. 75–87.
5. Carpenter SH, Wolosick JR. Modifier influence in the characterization of hot-mix recycled material. transportation research record 777. Transportation Research Board, National Research Council, Washington DC; 1980. p: 15–22
6. Noureldin AS, Wood LE. Rejuvenator diffusion in binder film for hot-mix recycled asphalt pavement. Transportation research record 1115. Transportation Research Board, National Research Council, Washington DC; 1987. p. 51–61
7. Mcdaniel RS, Soleymani H, Anderson RM, Turner P, Peterson R. Recommended use of reclaim asphalt pavement in the superpave mix design method. National Cooperative Highway Research Program, Transportation Research Board, National Research Council, USA; 2000.
8. Mcdaniel RS, Anderson RM. Recommended use of reclaim asphalt pavement in the superpave mix design method: technician’s manual. National Cooperative Highway Research Program, Transportation Research Board, National Research Council, USA; 2001.
9. Stephens JE, Mahoney J, Dippold C. Determination of the PG binder grade to use in a RAP mix. University of Connecticut and the Connecticut Department of Transportation; 2001.
10. Brock DJ, Richmond JL. Milling and recycling. ASTEC Inc, 4010 Jerome Avenue, Chattanooga, TN 37407, USA; 2005.
11. United States Department of Transportation, FHA. Reclaimed asphalt pavement – user guidelines; 2007. [24.12.12].
12. BS:4987-1. BS 4987-1 (2005): Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures, British Institution; 2005.
13. State of the art report on aging test methods for bituminous pavement materials10.1080/1029843042000198568 ↗
14. BS-EN:12697-26. BS-EN:12697-26: Bituminous mixture test methods for hot mix asphalt. Part 26: Stiffness. British Institution; 2004.
15. BS-EN:12697-4. BS-EN 12697-4: Bituminous mixture – test method for hot mix asphalt. Part 4: bitumen recovery: fractionating column. British Institution; 2005.
16. BS-EN:12697-33. BS-EN 12697-33: Bituminous mixture – test method for hot mix asphalt. Part 33: Specimens prepared by roller compactor. British Institution; 2003.
17. BS-EN:12697-6. BS-EN 12697-6: Bituminous mixture – test method for hot mix asphalt. Part 6: Determination of bulk density of bituminous specimens. British Institution; 2003.
18. BS-EN:12697-8. BS-EN 12697-8: Bituminous mixture – test method for hot mix asphalt. Part 8: Determination of void characteristic of bituminous specimens. British Institution; 2003.
19. Tayebali AA, Tsai B-W, Monismith CL. Stiffness of asphalt-aggregate mixes. SHRP A-338, National Research Council, Washington DC, US; 1994.
20. Read JM. Fatigue cracking of bituminous paving mixtures – PhD thesis. Nottingham Centre for Pavement Engineering, School of Civil Engineering. The University of Nottingham; 1996.
21. A symptonic theory of certain “goodness of fit” criteria based on stochastic processes10.1214/aoms/1177729437 ↗
22. EDF statistics for goodness of fit and some comparisons10.1080/01621459.1974.10480196 ↗
23. Cutnell · 2004
24. Lee T-C, Terrel RL, Mahoney JP. Test for efficiency of mixing of recycled asphalt paving mixtures. Transportation Research Record, National Research Council, Washington DC, vol 911; 1983. pp: 51-59.