Effect of material properties on long-term deflections of GFRP reinforced concrete beams
Source abstract
Abstract
The influence of compressive concrete strength and reinforcement ratio on long-term deflections in GFRP reinforced concrete beams is analysed in this paper. A total of 20 beams, cast with two different concrete strengths (30 and 50 MPa), and different reinforcement amounts of GFRP and steel, were tested under short-term loading and then subjected to different levels of sustained loading for a period of between 250 and 700 days. The results obtained revealed the influence of the concrete and reinforcement properties on long-term deflections. Thus, the higher the reinforcement ratio and the lower the compressive strength were, the higher the total-to-instantaneous deflection ratio was. The measured long-term deflections were compared to those calculated using available design equations for FRP RC structures, such as those from ACI 440.1R-06 and CSA-S806-02, as well as being compared to the CEB-FIP procedure. In addition, the experimental data were evaluated with a methodology proposed by the authors, based on multiplicative coefficients, obtained from a rational simplification of the Effective Modulus Method. Long-term deflections obtained with CEB-FIP and the proposed methodology were in good agreement with the experimental values. However, some differences were found when ACI 440.1R-06 or CSA-S806-02 procedures were applied
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 1993
2. GangaRao · 2006
3. Construction and cost analysis of an FRP reinforced concrete bridge deck10.1016/j.conbuildmat.2005.02.007 ↗
4. A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
5. Joh O, Wang Z, Goto Y. Long-term deflection of fiber reinforced polymer concrete beams. Special Publication SP 188-51. Fourth international symposium on fiber reinforced polymer reinforcement for reinforced concrete structures; 1999. p. 577–90.
6. Brown V, Bartholomeu C. Long-term deflections of GFRP-reinforced concrete beams. In: First international conference on composites in infra-structure. Tucson, Arizona, USA; 1996. p. 389–400.
7. Brown V. Sustained load deflections in GFRP-reinforced concrete beams. In: 3rd International RILEM symposium on non-metallic (FRP) reinforcement for concrete structures (FRPRCS-3). Sapporo, Japan; 1997. p. 495–502.
8. American Concrete Institute Committee 318 ACI. Building code requirements for structural concrete and commentary (ACI 318-08). Farmington Hills (Michigan, USA): American Concrete Institute; 2008.
9. Compression steel effect on long-time deflections
10. Time-dependent deformations of concrete beams reinforced with CFRP bars10.1016/S1359-8368(99)00045-1 ↗
11. American Concrete Institute Committee 440 ACI. Guide for the design and construction of structural concrete reinforced with FRP bars (ACI 440.1R-06). Farmington Hills (Michigan, USA): American Concrete Institute; 2006.10.1061/40753(171)158 ↗
12. CSA Standard CAN/CSA-S806-02. Design and construction of building components with fibre-reinforced polymers. Mississauga, Canada: Canadian Standards Association; 2002.
13. Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams10.1016/j.compstruct.2012.08.052 ↗
14. Re-evaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars10.1061/(ASCE)0733-9445(2005)131:5(752) ↗
15. Shrinkage restraint and loading history effects on deflections of flexural members
16. Gross SP, Yost JR, Kevgas G. Time-dependent behavior of normal and high strength concrete beams reinforced with GFRP bars under sustained loads. High Performance Materials in, Bridges; 2003. p. 451–62.10.1061/40691(2003)40 ↗
17. Creep effect on the behavior of concrete beams reinforced with GFRP bars subjected to different environments10.1016/j.conbuildmat.2006.05.008 ↗
18. A rational method to predict long-term deflections of FRP reinforced concrete members10.1016/j.engstruct.2012.02.021 ↗
19. Gilbert · 2011
20. Prediciton of concrete creep effects using age-adjusted effective modulus method
21. CEN 2004. Eurocode 2: design of concrete structures. Part 1.1: General rules and rules for buildings (EN 1992-1-1:2004). Comité Européen de Normalisation, Brussels; 2004.
22. Comité Euro-International du Béton (CEB). CEB Design Manual on Cracking and Deformations. Bulletin d’Information 158-E; 1985.
23. ACI Committee 435. Control of deflections in concrete structures (ACI 435R-95). Detroit (Michigan, USA): American Concrete Institute; 1995.
24. Long-term deflection prediction of concrete members reinforced with glass fibre reinforced polymer bars10.1139/l00-009 ↗
25. Ghali · 2002
26. CEB- FIP 1990. Model code for concrete structures. Comité Euro-International du Béton. Féderation Internationale de la Précontrainte, Thomas Telford House, London, England; 1990.
27. A simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars10.1016/j.compstruct.2010.01.016 ↗
28. American Concrete Institute Committee 440 ACI. ACI 440.3R-04. Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures. Farmington Hills, Michigan, USA: American Concrete Institute (ACI); 2004.
29. Concrete flexural members reinforced with fiber reinforced polymer: design for cracking and deformability10.1139/l01-085 ↗
30. ISIS Canada. Reinforcing concrete structures with fibre reinforced polymers Design Manual No. 3. ISIS Canada Corporation, University of Manitoba, Manitoba, Canada; 2001.
31. Neville · 1995
32. Effective moment of inertia for calculating deflections of concrete members containing steel and fiber reinforced polymer bars