journal article·2014-10

The engineering properties of alkali-activated slag pastes exposed to high temperatures

Wei-Chien Wang, Her-Yung Wang, Ming-Hung Lo

Publisher page

Abstract

Abstract Alkali cementations material is a recent and new type of environmentally friendly and economical material that is produced from industrial waste (e.g., fly ash and slag). This material possesses many excellent engineering properties, including a high compressive strength, light weight and low thermal conductivity. This study used different liquid–solid ratios, alkaline solutions and slag to produce pastes. The findings showed that the slump and slump flow of the alkali-activated slag pastes increased with the alkaline solutions and liquid–solid ratio. Without any slow setting additive, the setting rate could be reduced by reducing the alkaline solutions. After different curing ages at high temperatures, residual compressive strength, ultrasonic pulse velocity and thermal imaging tests. The findings showed that the ultrasonic pulse velocity and compressive strength of the alkali-activated slag pastes increased with the increase in the alkali-activated solution. The engineering properties declined as the liquid–solid ratio increased, but the workability improved. The increase in the alkaline solutions could enhance the compressive strength at high temperatures; the compressive strength of 0.5% alkali-activated at 500 °C was 30–50% of that of 1% alkali-activated. The ultrasonic pulse velocity at the high temperature of 500 °C was 2171–3322 m/s; the ultrasonic pulse velocities of 0.75% and 1% alkali-activated at 800 °C were 2605 m/s and 2812 m/s, respectively, but the ultrasonic pulse velocity of 0.5% alkali-activated 0.5% was only 2211 m/s. The alkaline solutions of 0.75% alkali-activated and 1% alkali-activated were sufficient to finish the polyreaction within a short period of time to afford a material that possessed low porosity and high strength material. The results show that research on alkali-activated slag significantly contributes to energy saving and carbon reduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Ho KM, Zhang KY. Residential and commercial complex building fire safety measures of risk assessment studies and fire evacuation. ABRI research report; 2005.
2. Ciou SS. A study on the high temperature properties of cement mortar with waste liquid crystal glass powder. National Kaohsiung University of Applied Sciences [Master thesis]; 2009.
3. Chen BT. Evaluation on properties of damaged concrete by elevated temperature using methods of spectral analysis of surface wave and support vector machine. National Taiwan University of Science and Technology [Ph.D. thesis]; 2009.
4. Pawlasova S, Skavara F. High-temperature properties of geopolymer materials. In: Alkali activated materials – research, production and utilization 3rd conference. Prague, Czech Republic; 2007.p. 523–4.
5. Bortnovsky O, Dvorakova K, Roubicek P, Bousek J, Prudkova Z, Development PB. Properties and production of geopolymers based on secondary raw materials. In: Alkali activated materials -research, production and utilization 3rd conference. Prague, Czech Republic; 2007.p. 83–96.
6. Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures10.1007/s10853-007-2205-6 ↗
7. Krivenko P, Guziy S. Fire resistant alkaline Portland cements. In: Alkali-activated materials-research, production and utilization 3rd conference. Prague, Czech Republic; 2007. p. 333–47.
8. Perná I, Hanzlicek T, Straka P, Steinerova M. Utilization of fluidized bed ashes in thermal resistance applications. In: Alkali activated materials-research, production and utilization 3rd conference. Prague, Czech Republic; 2007. p. 527–37.
9. Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings10.1016/j.jnoncrysol.2010.09.063 ↗
10. Geopolymer and Portland cement concretes in simulated fire10.1680/macr.9.00110 ↗
11. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue10.1016/j.conbuildmat.2011.12.017 ↗
12. Global warming impact on the cement and aggregates industries
13. Chao JY. Manufacturing and properties of alkali-activated waste glass cement. National Cheng Kung University [Master thesis]; 2008.
14. Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers10.1016/j.conbuildmat.2013.09.048 ↗
15. Alkali-aggregate reaction in activated fly ash systems10.1016/j.cemconres.2006.11.002 ↗
16. Lee NK, Jang JG, Lee HK. Effect of blast furnace slag on drying shrinkage of fly ash-based paste and mortar activated with sodium silicate. In: The 5th international conference of Asian concrete federation. Pattaya, Thailand; 2012. p. 24–6.
17. Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity10.1021/ie060187o ↗
18. Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack10.1016/j.cemconcomp.2012.01.010 ↗
19. Qiu JP. Geopolymer produced using blast furnace slag. National Taipei University of Technology [Master thesis]; 2006.
20. The role of inorganic polymer technology in the development of green concrete10.1016/j.cemconres.2007.08.018 ↗
21. Properties of concrete made with recycled crushed glass at elevated temperatures10.1016/j.buildenv.2005.02.018 ↗
22. Three-dimensional computer modeling of slag cement hydration10.1007/s10853-007-1977-z ↗
23. Effect of autogenous deformation on the cracking risk of slag cement concretes10.1016/j.cemconcomp.2010.12.003 ↗
24. Fuence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution10.1016/j.conbuildmat.2013.11.073 ↗