journal article·2014-03

Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings

Dujian Zou, Tiejun Liu, Jun Teng, Chengcheng Du, Bo Li

Publisher page

Abstract

Abstract Prediction of shrinkage and creep is important for evaluating the time-dependent effects on the structural performance of concrete structures. Differential axial shortening of high-rise buildings, caused by shrinkage, creep and elastic deformation, is becoming significant with increasing building height. In this paper, an experimental investigation was carried out to study the time-dependent deformation of a RC shear wall which is widely used in high-rise buildings. The large-scale RC shear wall was under sustained load for about 1 year and the shrinkage and creep strains were monitored. The test results show that the rate of time-dependent strains was shape dependent. This indicates that, with the same volume–surface ratio, the current prediction models, which are based on longitudinal measurements of prismatic or cylindrical specimens, underestimate the shrinkage rate of concrete shear walls. A case study was further conducted to illustrate the effects of vertical components’ shape on the differential axial shortening of high-rise buildings. In addition, the test results also show that the influence of seasonal variations of ambient relative humidity on shrinkage and creep is significant. Therefore, the axial shortening prediction of high-rise buildings using mean annual relative humidity may not accord with actual situations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Fire effects on concrete materials · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. ACI 209R-92. Prediction of creep, shrinkage, and temperature effects in concrete structures. In: Reported by ACI Committee 209. Farmington Hills, MI, USA: American Concrete Institute; 1992.
2. Creep and shrinkage prediction model for analysis and design of concrete structures—model B310.1007/BF02473152 ↗
3. Criteria for rational prediction of creep and shrinkage of concrete
4. Comité Euro-International du Béton (CEB). CEB-FIP model code for concrete structures. Lausanne, Switzerland; 1990.
5. Design provisions for drying shrinkage and creep of normal strength concrete
6. A simplified procedure for evaluating the effects of creep and shrinkage on prestressed concrete girder bridges and the application of European and North American prediction models10.1061/(ASCE)BE.1943-5592.0000483 ↗
7. Factors affecting shrinkage and creep of hardened concrete and guide for modeling – a state-of-the-art report on international recommendations and scientific debate
8. ACI 209.2R-08. Guide for modeling and calculating shrinkage and creep in hardened concrete. In: Reported by ACI Committee 209. Farmington Hills, MI, USA: American Concrete Institute; 2008.
9. Serviceability behaviour of PC structures by probabilistic and fuzzy probabilistic approaches10.1080/15732470601155565 ↗
10. Fintal · 1987
11. Moragaspitiya P, Thambiratnam D, Perera N, Tommy C. Differential axial shortening of concrete structures. In: 2nd Infrastructure theme postgraduate conference; 2009.
12. Influence of column shortening in reinforced concrete and composite high rise structures
13. Designing for effects of creep and shrinkage in high-rise concrete buildings
14. Development of a vibration based method to update axial shortening of vertical load bearing elements in reinforced concrete buildings10.1016/j.engstruct.2012.07.010 ↗
15. A numerical method to quantify differential axial shortening in concrete buildings10.1016/j.engstruct.2010.04.006 ↗
16. Dynamic behavior of reinforced concrete frame structure during construction10.1007/s11771-008-0078-8 ↗
17. Prediction of time dependent effects in concrete structures using early measurement data10.1016/j.engstruct.2007.01.015 ↗
18. Creep and shrinkage and the design of super tall buildings-a case study: the Burj Dubai Tower
19. Analysis technique for autogenous shrinkage in high performance concrete with mineral and chemical admixtures10.1016/j.conbuildmat.2012.02.005 ↗
20. Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete10.1016/j.conbuildmat.2012.12.015 ↗
21. Mehta · 2008 · 61
22. Influence of size and shape of member on the shrinkage and creep of concrete
23. Creep, shrinkage-size, and age at loading effects
24. Shape optimization of concrete gravity dams under creep effects
25. A rational approach to the analysis of creep structural effects