A model for the prediction of the punching resistance of steel fibre reinforced concrete slabs centrically loaded
Source abstract
Abstract
Abstract With the aim of contributing for the development of design guidelines capable of predicting with high accuracy the punching resistance of steel fibre reinforced concrete (SFRC) flat slabs, a proposal is presented in the present paper and its predictive performance is assessed by using a database that collects the experimental results from 154 punching tests. The theoretical fundaments of this proposal are based on the critical shear crack theory proposed by Muttoni and his co-authors. The proposal is capable of predicting the load versus rotation of the slab, and attends to the punching failure criterion of the slab. The proposal takes into account the recommendations of the most recent CEB-FIP Model Code for modelling the post-cracking behaviour of SFRC. By simulating the tests composing the collected database, the good predictive performance of the developed proposal is demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Punching shear strength of steel fiber reinforced concrete slabs10.1061/(ASCE)0899-1561(1994)6:2(240) ↗
2. Some results on punching shear in plain and fibre-reinforced micro-concrete slabs10.1680/macr.1997.49.180.201 ↗
3. Nguyen-Minh L, Rovňák M, Tran-quoc T, Nguyen-Kim K. Punching shear resistance of steel fiber reinforced concrete flat slabs. Punching shear resistance of steel fiber reinforced concrete flat slabs. In: Proceedings of the twelfth east Asia–Pacific conference on structural engineering and construction (EASEC-12). Hong Kong Special Administrative Region, China (with CD-rom); 24–26th January 2011. p. 535–6.10.1016/j.proeng.2011.07.230 ↗
4. Destrée X. Free suspended elevated slabs of steel fibre reinforced concrete: full scale test results and design. In: Gettu R, editor. 7th International symposium of fiber-reinforced concrete: design and applications BEFIB 2008; September 2008. p. 941–50.
5. Steel fibre only reinforced concrete in free suspended elevated slabs: case studies, design assisted by testing route, comparison to the latest SFRC standard documents
6. Design and testing elevated steel fibre reinforced self-compacting concrete slabs
7. Progressive collapse of reinforced concrete structures: a multihazard perspective
8. Punching shear tests on steel fibre reinforced microconcrete slabs10.1680/macr.1987.39.138.42 ↗
9. Effect of fibers on the punching shear strength of slab–column connections10.1016/0958-9465(94)00031-S ↗
10. The critical shear crack theory as mechanical model for punching shear design and its application to code provisions
11. Steel fibers as only reinforcement for flat slab construction – experimental investigation and design10.1016/j.conbuildmat.2011.06.004 ↗
12. Punching shear strength of reinforced concrete slabs without transverse reinforcement
13. CEB-FIP. Model code 2010: final draft. Model code prepared by Special Activity Group 5. Lausanne; September 2011.
14. Kinnunen · 1960 · vol. 158
15. Shehata IAEM. Punching of prestressed and non-prestressed reinforced concrete flat slabs. PhD thesis. London: The Polytechnic of Central London; 1985.
16. Alexander SDB, Simmonds SH. Bond model for strength of slab–column joints. Department of Civil Engineering, Structural Engineering report no. 174. University of Alberta; 1991.
17. Behaviour of beams and punching in slabs without shear reinforcement
18. Moraes Neto BN. Punching behaviour of steel fibre reinforced concrete slabs submitted to symmetric loading. PhD in Civil Engineering, Department of Civil and Environmental Engineering, University of Brasília, Brasília, DF; January 2013 (in Portuguese).
19. Guandalini S. Poinçonnement symétrique des dalles en béton armé. PhD thesis 3380. Ecole Polytechnique Fédérale de Lausanne, Switzerland; 2005 (in French).
20. A parametric study on the use of strain softening/hardening FRC for RC elements failing in bending10.1061/(ASCE)MT.1943-5533.0000373 ↗
21. Azevedo AP. Resistance and ductility of column–slab connections in slabs of high strength steel fibre reinforced concrete and including steel studs. MSc thesis. EESC-USP, Brazil; 1999 (in Portuguese).
22. Holanda KMA. Analysis of resistant mechanisms and similarities of the addition effect of steel fibers on strength and ductility to both punching shear of flat and the shear of concrete beams. PhD thesis. São Carlos, Brazil; 2002 (in Portuguese).
23. Pullout behaviour of steel fibres in self-compacting concrete10.1061/(ASCE)MT.1943-5533.0000001 ↗
24. Fundamental analysis of aggregate interlock
25. The modified compression-field theory for reinforced concrete elements subjected to shear
26. ACI 318. Building code requirements for structural concrete. Farmington Hills, Michigan: American Concrete Institute; 2008.
27. Collins MP. Evaluation of shear design procedures for concrete structures. A report prepared for the CSA technical committee on reinforced concrete design; 2001.
28. Punching shear tests of concrete slabs–column joints containing fiber reinforcement
29. Punching shear strength of steel fiber reinforced concrete flat plates
30. Punching shear strength of interior concrete slab–column connections reinforced with steel fibers10.1016/j.cemconcomp.2006.12.003 ↗
31. Design equation for punching shear capacity of SFRC slabs10.4334/IJCSM.2011.5.1.035 ↗
32. Moraes-Neto BN, Barros JAO, Melo GSSA. The predictive performance of design models for the punching resistance of SFRC slabs in inner column loading conditions. In: 8th RILEM international symposium on fibre reinforced concrete: challenges and opportunities (BEFIB 2012); September 2012.
33. Evaluation of steel fiber reinforcement for punching shear resistance in slab–column connections – Part I: monotonically increased load
34. Mcharg PJ. Effect of fibre-reinforced concrete on the performance of slab–column specimens. Master thesis. Montreal-Canada: McGill University; 1997.
35. Contribution of steel fibers to the strength characteristics of lightweight concrete slab–column connections falling in punching shear
36. Punching shear tests of normal- and high-strength concrete flat plates10.1139/l06-089 ↗