Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders
Source abstract
Abstract
Abstract The rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders were investigated through rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR) tests in the laboratory. Two types of APAOs and four percentages of APAO were selected in the study. RV results indicate that the addition of APAO increases the viscosity of modified asphalt binder at high temperatures. DSR measurements show that the elastic property of asphalt binder is enhanced and the failure temperature is improved due to the addition of APAO. In addition, BBR results demonstrate that additional APAO has negative effects on the creep stiffness and creep rate of the modified asphalt binders. The temperature susceptibility of asphalt binder is reduced at high, intermediate, and low temperature zones after adding APAO. Moreover, this study found that APAO K3050 has better modification than K3020 due to its higher viscosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Characterization of styrene–butadiene–styrene polymer modified bitumens—comparison of conventional methods and dynamic mechanical analyses10.1520/JTE11874J ↗
2. Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen10.1002/pen.20802 ↗
3. The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen10.1016/j.conbuildmat.2012.07.090 ↗
4. Preparation of an SBS latex-modified bitumen emulsion and performance assessment10.1080/10916460902939436 ↗
5. The effect of styrene–butadiene–rubber/montmorillonite modification on the characteristics and properties of asphalt10.1016/j.conbuildmat.2009.06.011 ↗
6. Effects of the manufacturing process on the performances of the bituminous binders modified with EVA10.1016/j.conbuildmat.2007.01.028 ↗
7. Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites10.1016/j.eurpolymj.2009.12.024 ↗
8. Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt10.1016/j.conbuildmat.2008.12.009 ↗
9. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
10. Experimental research on APAO modified asphalt
11. Experimental research of APAO modified bitumen
12. Usmani · 1997
13. Kong LY, Zhou JC, Yan QR. The improvement of the APAO modified asphalt high temperature stability. In: Proceedings of the 9th domestic symposium of petroleum asphalt technology, Kunming, China; 2004. p. 42–6.
14. Application of APAO modified asphalt in pavement repairing engineering
15. JTG F40. Technical specification for construction of highway asphalt pavements. Ministry of Transport of the People’s Republic of China; 2004.
16. ASTM D4402. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. American Society for Testing and Materials; 2012.
17. ASTM D7175. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. American Society for Testing and Materials; 2008.
18. ASTM D6648. Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). American Society for Testing and Materials; 2008.
19. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
20. Petersen JC, Robertson RE, Branthaver JF, et al. Binder characterization and evaluation. In: Test Methods. SHRP-A-370, vol. 4. Washington, D.C.: Strategic Highway Research Program, National Research Council; 1994.
21. Temperature-susceptibility control in asphalt cement specifications
22. ASTM D2493. Standard viscosity–temperature chart for asphalts. American Society for Testing and Materials; 2009.
23. Ranking asphalt binders by activation energy for flow
24. Salomon D, Zhai HC. Asphalt binder flow activation energy and its significance for compaction effort. In: Proceedings of the 3rd Eurasphalt and Eurobitume Congress, Vienna, Austria; 2004. p. 1754–62.
25. Haider SW, Mirza MW, Thottempudi AK, Bari J, Baladi GY. Characterizing temperature susceptibility of asphalt binders using activation energy for flow. In: Proceedings of the transportation and development institute congress, Chicago, United States; 2011. p. 493–503.10.1061/41167(398)48 ↗
26. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
27. Chemical and rheological characteristics of styrene–butadiene–styrene polymer-modified bitumens10.3141/1661-13 ↗
28. Development of alternative parameters to evaluate the temperature susceptibility of asphalt binders
29. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders10.1016/j.conbuildmat.2012.04.004 ↗
30. Influence of carbon nanoparticles on the rheological characteristics of short-term aged asphalt binders10.1061/(ASCE)MT.1943-5533.0000184 ↗
31. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗