journal article·2016-07

Oil swellable polymer modified cement paste: Expansion and crack healing upon oil absorption

Zichen Lu, Xiangming Kong, Ruifang Yang, Yanrong Zhang, Lingfei Jiang, Ziming Wang, Qichun Wang, Wei Liu, Min Zeng, Shiming Zhou, Biqin Dong, Feng Xing

Publisher page

Abstract

Abstract This paper proposes a novel approach to achieve self-healing property of cement sheath in the oil well triggered by oil leakage through cracks. An oil swellable polymer (OSP) with oil absorptivity as high as 700% was synthesized through emulsion polymerization. The OSP dispersion was added into the Portland cement paste. It is found that the oil absorption and the linear expansion of the OSP modified hardened cement paste (MHCP) are greatly increased compared to the blank hardened cement paste (BHCP). Pore structure measurements by N 2 adsorption show that the addition of OSP decreases the total porosity of MHCP which confirms that the formation of the polymeric film in MHCP. The self-healing ability of MHCP was evaluated by the oil flow test through a single crack in the cylindrical specimen. The oil flow tests indicate that the leakage of oil through the crack is gradually mitigated due to the expansion of the MHCP and thus the self-healing ability is successfully achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Characterization and quantification of self-healing behaviors of microcracks due to further hydration in cement paste10.1016/j.cemconres.2013.05.003 ↗
2. Simulation of self-healing by further hydration in cementitious materials10.1016/j.cemconcomp.2012.01.003 ↗
3. Autogenous healing of marine exposed concrete: characterization and quantification through visual crack closure10.1016/j.cemconres.2015.02.021 ↗
4. A review: self-healing in cementitious materials and engineered cementitious composite as a self-healing material10.1016/j.conbuildmat.2011.08.086 ↗
5. A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility10.1016/j.compscitech.2005.03.008 ↗
6. Matrix cracking repair and filling using active and passive modes for smart timed release of chemicals from fibers into cement matrices10.1088/0964-1726/3/2/006 ↗
7. Microencapsulation technology and its applications in building construction materials
8. Noda Plywood Mfg. Co., Ltd., Fabrication of hydraulic building boards, JP Patent 60028776, Noda Plywood Mfg. Co, Ltd., 1985.
9. Nishiwaki · 1997
10. Superior properties of epoxy modified mortars and concretes without hardener
11. Investigation of microcracks self-repair function of polymer-modified mortars using epoxy resins without hardeners
12. Sustainable concrete; is nanotechnology the future of concrete polymer composites?10.4028/www.scientific.net/AMR.687.3 ↗
13. Self-repairing of polymer-cement concrete
14. Use of bacteria to repair cracks in concrete10.1016/j.cemconres.2009.08.025 ↗
15. Multiscale mechanical quantification of self-healing concrete incorporating non-ureolytic bacteria-based healing agent10.1016/j.cemconres.2014.06.003 ↗
16. Self healing of crack and water permeability of expansive concrete
17. Self-healing behavior by cementitious recrystallization of cracked concrete
18. Some characteristics of a self healing mortar incorporating calcium sulfo-aluminate based agent
19. Crack self-healing behaviour of cementitious composites incorporating various mineral admixtures10.3151/jact.8.171 ↗
20. Potential of superabsorbent polymer for self-sealing cracks in concrete10.1179/174367609X459559 ↗
21. Lu · 2006
22. Swelling and network parameters of high oil-absorptive network based on 1-octene and isodecyl acrylate copolymers10.1002/app.21735 ↗
23. Retardation effect of styrene-acrylate copolymer latexes on cement hydration10.1016/j.cemconres.2015.04.014 ↗
24. Urban · 2002
25. From microstructure to macrostructure: an integrated model of structure formation in polymer modified concrete10.1007/BF02481591 ↗
26. Polymers in concrete: a vision for the 21st century10.1016/S0958-9465(99)00032-3 ↗
27. Mercury intrusion porosimetry and hierarchical structure of cement pastes theory and experiment10.1016/S0008-8846(99)00252-5 ↗
28. Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes10.1680/adcr.2005.17.2.77 ↗
29. Mercury porosimetry – an inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
30. Pore size distribution of hydrated cement pastes modified with polymers10.1016/S0008-8846(01)00549-X ↗
31. Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure10.1016/j.cemconres.2004.01.014 ↗
32. Zhang · 2007
33. Mercury porosimetry of hardened cement pastes10.1016/S0008-8846(99)00083-6 ↗
34. The influence of different drying techniques on the water sorption properties of cement-based materials10.1016/j.cemconres.2014.06.009 ↗
35. The influence of water removal techniques on the composition and microstructure of hardened cement pastes10.1016/j.cemconres.2008.02.012 ↗
36. Yuan · 1996
37. Shen · 2007
38. A discussion of the paper ‘‘Effect of drying on cement-based materials pore structure as identified by mercury porosimetry-a comparative study between oven, vacuum, and freeze-drying’’ by C. Gallé10.1016/S0008-8846(02)00940-7 ↗
39. Reply to the discussion by S. Diamond of the paper “Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: a comparative study between oven, vacuum and freeze-drying’’10.1016/S0008-8846(02)00941-9 ↗
40. An ESEM investigation of latex film formation in cement pore solution10.1016/j.cemconres.2010.11.005 ↗
41. Influences of superplasticizer, polymer latexes and asphalt emulsions on the pore structure and impermeability of hardened cementitious materials10.1016/j.conbuildmat.2013.11.104 ↗
42. Multi-scale rock surface area quantification-a systematic method to evaluate the reactive surface area of rocks10.1016/j.chemer.2003.12.002 ↗
43. Pore size determination in modified micro- and mesoporous materials. Pitfalls and limitations in gas adsorption data analysis10.1016/S1387-1811(03)00339-1 ↗
44. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
45. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
46. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
47. Pore space analysis of cement-based materials by combined Nitrogen sorption-Wood’s metal impregnation and multi-cycle mercury intrusion10.1016/j.cemconcomp.2010.04.003 ↗
48. New perspectives in mercury porosimetry10.1016/S0001-8686(98)00052-9 ↗
49. Realistic pore structure of Portland cement paste: experimental study and numerical simulation10.12989/cac.2013.11.4.317 ↗
50. The influence of silanes on hydration and strength development of cementitious systems10.1016/j.cemconres.2014.10.008 ↗
51. Compressive strength development and microstructure of cement-asphalt mortar10.1007/s11595-011-0351-9 ↗
52. Static and dynamic mechanical properties of cement-asphalt composites10.1061/(ASCE)MT.1943-5533.0000681 ↗
53. Mechanical properties of polymer-modified silica aerogels dried under ambient pressure10.1016/j.jnoncrysol.2011.06.017 ↗
54. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete10.1617/s11527-014-0351-2 ↗
55. Polymer modified mortar with gradient polymer distribution: preparation, permeability, and mechanical behavior10.1016/j.conbuildmat.2012.07.080 ↗