Comparative study of reaction degree of mineral admixture by selective dissolution and image analysis
Source abstract
Abstract
Abstract The reaction degrees of slag and fly ash in composite binder pastes were comparatively studied by selective dissolution and BSE image analysis. The reaction degree of slag or fly ash determined by selective dissolution is higher than that by image analysis at early age, but the inverse regularity is observed at later age. When the selective dissolution method is used, the reaction degrees of slag and fly ash may be overestimated at early age due to the loss of the superfine particles through the filtration and the partial dissolution of slag or fly ash, and underestimated at later age owing to the presence of cement and hydration products. The narrow reacted slag rims formed at early age cannot be accurately identified during image analysis procedure, which leads to an underestimation of the reaction degree of slag. Due to the destruction of fly ash particles during grinding or polishing process, the reaction degree of fly ash obtained by image analysis is overestimated. At later age, the small particles cannot be fully counted at low magnification and the outer part of particles cannot be calculated at high magnification, and thus high reaction degree may be obtained. BSE image analysis could give more reliable results with acceptable error than selective dissolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
2. Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete10.1016/j.conbuildmat.2015.12.045 ↗
3. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
4. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
5. Taylor · 1997
6. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
7. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods10.1016/j.cemconres.2004.04.014 ↗
8. Quantitative Rietveld analysis of the amorphous content in cements and clinkers10.1023/A:1026363906432 ↗
9. 27Al and 29Si NMR and XRD characterization of clinkers: standard phases and new waste based formulations
10. Application of the Rietveld method to the analysis of anhydrous cement10.1016/j.cemconres.2010.10.003 ↗
11. Degrees of reaction of the slag in some blends with Portland cements10.1016/0008-8846(95)00190-5 ↗
12. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions10.1016/S0008-8846(01)00587-7 ↗
13. The differences among the roles of ground fly ash in the paste, mortar and concrete10.1016/j.conbuildmat.2015.05.117 ↗
14. Effect of water curing conditions on the hydration degree and compressive strengths of fly ash-cement paste10.1016/j.cemconcomp.2006.05.018 ↗
15. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
16. Characterization of solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes10.1016/j.cemconres.2009.10.005 ↗
17. Internal chemical evolution of the constitution of blended cements10.1016/0008-8846(88)90042-7 ↗
18. Quantification of the degree of reaction of fly ash10.1016/j.cemconres.2010.07.004 ↗
19. Methods for determination of degree of reaction of slag in blended cement pastes10.1016/j.cemconres.2011.11.010 ↗
20. A combined 29Si MAS NMR and selective dissolution technique for the quantitative evaluation of hydrated blast furnace slag cement blends10.1111/j.1551-2916.2006.01431.x ↗
21. Backscattered electron imaging of cementitious microstructures: understanding and quantification10.1016/j.cemconcomp.2004.02.029 ↗
22. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2013.06.008 ↗
23. Quantitative analysis of hydration degree of composite binder by image analysis and non-evaporable water content
24. Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure10.1016/j.cemconres.2004.01.014 ↗
25. Determining the slag fraction, water/binder ration and degree of hydration in hardened cement pastes10.1016/j.cemconres.2013.12.002 ↗
26. A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste10.1016/j.cemconres.2015.02.008 ↗
27. Effect of fresh water leaching on the microstructure of hardened composite binder pastes10.1016/j.conbuildmat.2014.07.019 ↗
28. Effect of fly ash on the kinetics of Portland cement hydration at different curing temperatures10.1016/j.cemconres.2011.02.005 ↗
29. An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete10.1007/s10853-011-5689-z ↗
30. Quantitative determination of fly ash in the hydrated fly ash-CaSO4·2H2O-Ca(OH)2 system10.1016/0008-8846(85)90047-X ↗
31. Hydration kinetics of composite binder containing slag at different temperatures10.1007/s10973-015-4631-z ↗
32. Degree of hydration and gel/space ratio of high volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
33. Hydration of fly ash cement10.1016/j.cemconres.2004.09.008 ↗