Applications of ultra-lightweight cement composite in flat slabs and double skin composite structures
Source abstract
Abstract
Abstract Ultra-lightweight cement composite (ULCC) has been developed for building and offshore constructions. This paper aims to apply the ULCC in the flat slabs of commercial buildings and double-skin-composite (DSC) ice-resistant walls in the Arctic offshore structures. After developing the structural concepts, quasi-static tests were performed on ULCC flat slabs, DSC slabs, and DSC shells to investigate their ultimate strength behaviors under concentrated loads. General behaviors of these specimens were reported, and the influences of flexural reinforcing ratio (or steel content), volume fraction of the fibers in ULCC, and depth of cross section on ultimate strength behaviors were studied and analyzed. A design approach with a series of equations was developed to predict the ultimate resistances of the reinforced flat slabs, DSC slabs and shells with ULCC. This design approach incorporated influences of fiber content, the resistance contributed by top steel skin, the influence of the curvature on the size of the punching cone in DSC shells, and the modifications on the punching shear resistance by the stud connectors in DSC structure. The accuracy of the design approach is checked against the reported 15 tests. Design recommendations were given for the flat slabs and DSC structures with ULCC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Strength and elastic properties of structural lightweight concretes10.1016/j.matdes.2010.12.053 ↗
2. Optimization of properties of fly ash aggregates for high strength lightweight concrete production10.1016/j.matdes.2011.02.028 ↗
3. Fuzzy logic model for prediction of mechanical properties of lightweight concrete exposed to high temperature10.1016/j.matdes.2008.08.030 ↗
4. Steel–concrete–steel sandwich system in Arctic offshore structure: materials, experiments, and design10.1016/j.matdes.2015.11.084 ↗
5. Method to determine mixture proportions of workable ultra-lightweight cement composites to achieve target unit weights10.1016/j.cemconcomp.2014.07.006 ↗
6. Flexural performance of fiber reinforced ultra lightweight cement composites with low fiber content10.1016/j.cemconcomp.2013.06.006 ↗
7. Stability of cenospheres in lightweight cement composites in terms of alkali–silica reaction10.1016/j.cemconres.2012.02.010 ↗
8. X.M. Liu, K.S. Chia, M.H. Zhang, J.Y.R. Liew, Water and chloride ion penetration resistance of high-strength ultra lightweight cement composite, in: 1st International Congress on Durability of Concrete (ICDC), Trondheim, Norway, 18–21 June 2012.
9. Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings10.1016/j.conbuildmat.2015.04.004 ↗
10. Ultimate strength behavior of curved steel–concrete–steel sandwich composite beams10.1016/j.jcsr.2015.08.043 ↗
11. An experimental investigation into the behavior of double skin sandwich beams10.1016/0143-974X(89)90073-4 ↗
12. Steel–concrete sandwich members without shear reinforcement
13. Finite element modeling of double skin composite slabs10.1016/S0168-874X(01)00093-2 ↗
14. Steel–concrete–steel sandwich slabs with lightweight core-static performance10.1016/j.engstruct.2010.12.019 ↗
15. Experimental and analytical study on ultimate strength behaviour of steel–concrete–steel sandwich composite beam structures10.1617/s11527-014-0252-4 ↗
16. Ultimate strength behaviour of steel–concrete–steel sandwich composite structures, Part 1: experimental and analytical study10.12989/scs.2014.17.6.907 ↗
17. Flexural tests of steel–concrete–steel sandwiches10.1680/macr.1976.28.94.13 ↗
18. Mechanical properties of normal strength mild steel and high strength steel S690 in low temperature relevant to Arctic environment10.1016/j.matdes.2014.04.057 ↗
19. P.W. Marshall, K.M.A. Sohel, J.Y.R. Liew, J.B. Yan, A. Palmer, Y.S. Choo, Development of SCS sandwich composite shell for arctic caissons, in: Offshore Technology Conference, Paper No. 23818, Houston, Texas, USA, 3–5 December 2012.10.4043/23818-MS ↗
20. Palmer · 2012
21. Design for punching shear
22. Strength of concrete slabs in punching shear10.1061/(ASCE)0733-9445(1986)112:12(2578) ↗
23. Ultimate strength of slab column connections
24. Predicting the punching strength of conventional slab-column specimens
25. Punching shear in concrete slabs10.1016/S0020-7403(97)00086-6 ↗
26. Finite element modelling of double skin composite slabs10.1016/S0168-874X(01)00093-2 ↗
27. British Standards Institution · 2004
28. British Standards Institution · 2004
29. American Concrete Institute 318-11 (ACI) · 2011
30. ASTM C39/C39M-14 · 2014
31. ASTM C496/C496M-11 · 2011
32. ASTM A370-13 · 2013
33. Push-out tests on J-hook shear connectors in steel–concrete–steel sandwich structure10.1617/s11527-013-0145-y ↗
34. Shear–tension interaction strength of J-hook connectors in steel–concrete–steel sandwich structure
35. Tensile resistance of J-hook connectors used in steel–concrete–steel sandwich structure10.1016/j.jcsr.2014.04.023 ↗