journal article·2016-08

Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography

Sang-Yeop Chung, Mohamed Abd Elrahman, Dietmar Stephan, Paul H. Kamm

Publisher page

Abstract

Abstract Insulating concrete is a type of material designed to enhance energy efficiency by reducing thermal conductivity. It contains numerous voids induced by the use of air-entraining admixtures or aggregates, and these voids strongly affect the characteristics and responses of the material. Thus, appropriate methods to examine the void distribution of materials are needed. Here, X-ray micro-computed tomography (micro-CT) is adopted to investigate the spatial distribution of voids in a material without destroying the specimen. By using micro-CT, a series of cross-sectional images with the micrometer range pixel size can be obtained. Then, void density contour and probabilistic description methods, such as two-point correlation and lineal-path functions, are used to describe the void distribution inside the specimen. In this study, Aer solids, small prefabricated hollow air bubbles, are used for insulating cement paste specimens to increase the insulating effect. The cement paste specimens with different void ratios and Aer solids are generated, and their void distribution characteristics are investigated using the methods mentioned above. The thermal and mechanical responses of the insulating specimens are also evaluated by experiments and numerical methods. The effect of Aer solids on the material characteristics and the relationship between void distribution and material responses are confirmed from the obtained results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. The effects of pumice aggregate/cement ratios on the low-strength concrete properties10.1016/j.conbuildmat.2007.01.030 ↗
2. Lightweight composite concrete produced with water treatment sludge and sawdust: thermal properties and potential application10.1016/j.conbuildmat.2010.06.012 ↗
3. Analysis of micro-morphology and heat-insulating property of leaf concrete10.1016/j.conbuildmat.2013.08.055 ↗
4. Evaluation of thermal conductivity for thermally insulated concretes10.1016/j.enbuild.2013.01.043 ↗
5. Percolation and pore structure in mortars and concrete10.1016/0008-8846(94)90079-5 ↗
6. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
7. Effect of pore clustering on the mechanical properties of ceramics10.1016/S0955-2219(01)00303-X ↗
8. Online SEM investigation of microcrack characteristics of concretes at various temperatures10.1016/j.cemconres.2004.07.015 ↗
9. Microscopy of historic mortars–a review10.1016/j.cemconres.2005.12.006 ↗
10. Identification and quantification of cracks in concrete by optical fluorescent microscopy10.1016/j.cemconres.2006.05.011 ↗
11. Study on some factors affecting the results in the use of MIP method in concrete research10.1016/S0008-8846(02)00974-2 ↗
12. Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography image10.1016/j.conbuildmat.2011.07.017 ↗
13. Application of X-ray computed tomography to characterise the early hydration of calcium aluminate cement10.1016/S0958-9465(01)00063-4 ↗
14. 3d experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography10.1016/j.cemconres.2006.10.012 ↗
15. Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images10.1617/s11527-008-9408-4 ↗
16. About microcracking due to leaching in cementitious composites: X-ray microtomography description and numerical approach10.1016/j.cemconres.2009.09.021 ↗
17. X-ray microtomographic studies of pore structure and permeability in Portland cement concrete
18. Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging10.1016/j.conbuildmat.2013.07.082 ↗
19. Characterisation of the pore-forming process in lightweight aggregate based on silica sludge by means of X-ray micro-tomography (micro-ct) and mercury intrusion porosimetry (mip)
20. Correlation between low-order probability distribution functions and percolation of porous concrete10.1680/macr.12.00125 ↗
21. Investigation of the permeability of porous concrete reconstructed using probabilistic description methods10.1016/j.conbuildmat.2014.06.013 ↗
22. Micro- and nano-X-ray computed-tomography: a step forward in the characterization of the pore-network of a leached cement paste10.1016/j.cemconres.2014.08.007 ↗
23. Micromechanical modelling of deformation and fracture of hydrating cement paste using X-ray computed tomography characterisation10.1016/j.compositesb.2015.11.007 ↗
24. Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions10.1016/j.actamat.2003.09.016 ↗
25. Lineal-path function for random heterogeneous materials10.1103/PhysRevA.45.922 ↗
26. Torquato · 2002
27. Constraints on microstructural two-point correlation functions10.1016/j.scriptamat.2005.06.013 ↗
28. Characterizing pore volume, size, and connectivity in pervious concretes for permeability prediction10.1016/j.matchar.2010.05.004 ↗
29. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
30. Practical use of the modified Bronnikov algorithm in micro-CT10.1016/j.nimb.2009.01.129 ↗
31. Periodic lines: definition, cascades, and application to granulometries10.1016/0167-8655(96)00066-9 ↗
32. Image based computations of lineal path probability distribution for microstructure representation10.1016/j.msea.2007.03.099 ↗
33. Extraction of morphological quantities from a digitized medium10.1063/1.359134 ↗
34. ABAQUS, Version 6.13, Dassault Systemes, Pawtucket, Rhode Island, 2013.
35. Incropera · 2006
36. DeutscheNorm · 2012
37. Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration10.1016/S1644-9665(12)60105-8 ↗
38. Numerical simulation of prestressed precast concrete bridge deck panels using damage plasticity model10.1007/s40069-014-0091-2 ↗
39. Neville · 2012
40. Mindess · 2002