journal article·2016-09

A numerical study of coupled timber walls with slip friction damping devices

Ashkan Hashemi, Reza Masoudnia, Pierre Quenneville

Publisher page

Abstract

Abstract In rocking timber structures, the traditional connections such as nailplates may need to be replaced by damping devices to provide the required lateral resistance and dissipate the seismic energy. This study seeks to investigate the seismic behaviour of coupled timber walls with slip friction connections. Slip friction connections present a low damage solution as they do not suffer from stiffness degradation and can be used after a seismic event. The seismic response of the described system is compared to those with equivalent nailplates. Displacement control quasi-static and also dynamic time-history analyses showed that the performance of the systems with friction devices is significantly improved under seismic loading compared to similar systems with equivalent nailplate connections. The systems with nailplates incurred significant inelastic damages while the systems with friction devices exhibited superior performance in terms of strength degradation and absorbed seismic energy. The introduced concept presents a feasible solution for timber structures when a low damage design is targeted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Masonry and Concrete Structural Analysis · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Preliminary results and conclusions from the PRESSS five-story precast concrete test building10.15554/pcij.11011999.42.67 ↗
2. An overview of the PRESSS five-story precast test building10.15554/pcij.03011999.26.39 ↗
3. Seismic design of multi-storey buildings using laminated veneer lumber (LVL)
4. Performance and design of LVL walls coupled with UFP dissipaters10.1080/13632469.2014.987406 ↗
5. Developments in seismic structural analysis and design10.1016/0141-0296(94)00006-F ↗
6. G.C. Clifton, G.A. MacRae, H. Mackinven, S. Pampanin, J. Butterworth, Sliding hinge joints and subassemblies for steel moment frames, Palmerston North, New Zealand: Proc of New Zealand Society for Earthq Eng Conf, 2007.
7. S. Ramhormozian, G.C. Clifton, G. A. MacRae, The Asymmetric Friction Connection with Belleville springs in the Sliding Hinge Joint, NZSEE Conference, Towards Integrated Seismic Design, 2014.
8. Proposed design models for the asymmetric friction connection
9. Seismic behaviour of cross-laminated timber structures
10. Full-scale tests and numerical analysis of low-rise CLT structures under lateral loading
11. SOFIE project – 3D shaking table test on a seven-storey full-scale cross-laminated timber building10.1002/eqe.2309 ↗
12. Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures10.1617/s11527-014-0278-7 ↗
13. Analytical predictions of the seismic response of friction damped timber shear walls10.1002/eqe.4290190209 ↗
14. A numerical approach for simulating the behaviour of timber shear walls10.12989/sem.2012.42.3.383 ↗
15. A numerical study of the seismic behaviour of timber shear walls with slip-friction connectors10.1016/j.engstruct.2011.09.016 ↗
16. Experimental testing of a rocking timber shear wall with slip-friction connectors10.1002/eqe.2413 ↗
17. Gagnon · 2011
18. Properties of CLT-panels exposed to compression perpendicular to their plane
19. Experimental and numerical behaviour of cross-laminated timber floors in fire conditions
20. Experimental and numerical analyses of new massive wooden shear-wall systems10.3390/buildings4030355 ↗
21. Hibbitt · 2014
22. Buchanan · 1999
23. A. Hashemi, P. Zarnani, A. Valadbeigi, R. Masoudnia, P. Quenneville, Seismic resistant cross laminated timber structures using an innovative resilient friction damping system, Proceedings of New Zealand Society for Earthquake Engineering Conference (NZSEE), Christchurch, New Zealand, 2016.
24. Strength of timber connections under potential failure modes: an improved design procedure10.1016/j.conbuildmat.2014.02.049 ↗
25. Development of a precast concrete shear-wall system requiring special code acceptance10.15554/pcij.01012007.122.135 ↗
26. Computers and Structures, SAP2000. (2011), Berkeley, CA, 2011.
27. Monotonic and cyclic nail connection tests10.1139/l92-010 ↗
28. A. Standard, “E2126”, Stand. test methods Cycl. load test Shear Resist. Vert. Elem. lateral force Resist. Syst. Build. West Conshohocken, PA Am. Soc. Test. Mater., 2009.
29. Standards New Zealand · 2004
30. Rocking timber structure with slip-friction connectors conceptualized as a plastically deformable hinge within a multistory shear wall
31. Peer · 2015