journal article·2016-10Open access

New developments with cold asphalt concrete binder course mixtures containing binary blended cementitious filler (BBCF)

Anmar Dulaimi, Hassan Al Nageim, Felicite Ruddock, Linda Seton

Abstract

A weakness in early strength and the need for longer curing times in the case of cold bituminous emulsion mixtures (CBEMs) compared to hot mix asphalt have been cited as barriers to the wider utilization of these mixtures. A binary blended filler material produced from high calcium fly ash (HCFA) and a fluid catalytic cracking catalyst (FC3R) was found to be very effective in providing microstructural integrity with a novel fast-curing cold asphalt concrete for the binder course (CACB) mixture. Balanced oxide compositions within the novel filler were identified as responsible for an enhanced hydration reaction, resulting in a very high early strength and a significant improvement in permanent deformation and fatigue resistance. Improved water sensitivity for progressive hydration with the new binary filler was also established while SEM analysis confirmed the formation of hydration products after various curing ages. © 2016 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Jenkins · 2000
2. Mechanical properties of an upgrading cold-mix asphalt using waste materials10.1061/(ASCE)MT.1943-5533.0000540 ↗
3. Developing maturity methods for the assessment of cold-mix bituminous materials10.1016/j.conbuildmat.2012.09.008 ↗
4. A Laboratory Study on Cold-mix, Cold-lay Emulsion Mixtures
5. Green bituminous asphalt relevant for highway and airfield pavement10.1016/j.conbuildmat.2011.12.065 ↗
6. Influence of curing on cold mix mechanical performance10.1007/BF02481685 ↗
7. European Asphalt Pavement Association (EAPA) · 2012
8. Moisture damage potential of cold asphalt10.1080/10298430802169838 ↗
9. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
10. Performance of gap graded cold asphalt containing cement treated filler10.1016/j.conbuildmat.2014.07.081 ↗
11. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt
12. A study of cement modified bitumen emulsion mixtures
13. A laboratory study for full cement replacement by fly ash and silica fume10.1680/macr.12.00025 ↗
14. Properties of GGBS-bitumen emulsion systems with recycled aggregates10.1080/14680629.2004.9689977 ↗
15. Utilisation of coal ashes in hot and cold bituminous mixtures
16. A novel cold rolled asphalt mixtures for heavy trafficked surface course10.1016/j.conbuildmat.2013.08.073 ↗
17. Performance characteristic of cold recycled mixture with asphalt emulsion and chemical additives
18. Report on durability of cold-recycled mixes: test procedures for stiffness determination
19. Fatigue characterization applicable to cold recycled asphalt mixes
20. Mechanical, durability and microstructure properties of cold asphalt emulsion mixtures with different types of filler10.1016/j.conbuildmat.2016.03.112 ↗
21. Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding10.1016/j.conbuildmat.2013.02.050 ↗
22. Ternary blended cementitious matrix for vegetable fiber reinforced composites10.4028/www.scientific.net/KEM.668.3 ↗
23. Use of spent catalyst from catalytic cracking in fluidized bed as a new concrete additive10.1016/S0040-6031(98)00498-5 ↗
24. European Committee for Standardization · 2006
25. Thanaya · 2003
26. Hydration kinetics of a low carbon cementitious material produced by physico-chemical activation of high calcium fly ash10.3151/jact.10.254 ↗
27. A binder from alkali activation of FCC waste: use in roof tiles fabrication10.4028/www.scientific.net/KEM.668.411 ↗
28. Lea · 1970
29. A new composite cementitious material for construction10.1016/j.conbuildmat.2012.04.107 ↗
30. Asphalt Cold Mix Manual
31. European Committee for Standardization · 2012
32. Development of sustainable cold rolled surface course asphalt mixtures using waste fly ash and silica fume10.1061/(ASCE)MT.1943-5533.0000843 ↗
33. European Committee for Standardization · 2003
34. Assessment of fracture properties of emulsified asphalt mixtures10.1080/14680629.2007.9690068 ↗
35. Enhancing the mechanical properties of gap graded cold asphalt containing cement utilising by-product material
36. Ojum · 2015
37. Laboratory studies to investigate the properties of novel cold-rolled asphalt containing cement and waste bottom ash10.1080/14680629.2013.852612 ↗
38. European Committee for Standardization · 2008
39. European Committee for Standardization · 2003
40. European Committee for Standardization · 2012
41. A comprehensive evaluation of moisture damage of asphalt concrete mixtures
42. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
43. Effect of temperature on phase composition and microstructure of artificial pozzolana-cement pastes containing burnt kaolinite clay10.1016/S0008-8846(98)00083-0 ↗
44. Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes10.1016/S0958-9465(99)00010-4 ↗
45. Characterization of fly ash bituminous concrete mixes10.1061/(ASCE)MT.1943-5533.0000125 ↗