journal article·2016-11

Utilisation of wood ash from biomass for the production of ceramic products

Olga Kizinievic, Viktor Kizinievic

Publisher page

Abstract

Abstract Utilisation of biomass as fuel is very attractive from the ecological point of view. Such way of energy extraction is ecologically clean (zero CO 2 emission) and biomass is renewable and theoretically inexhaustible local energy source. However, during the utilisation of secondary raw materials of biomass for energy production, higher amount of ash accumulates. Wood ash analysed in the research consists of two types of particles: first type – nonflammable mineral particles consisting of the following main elements: Si, Ca, Fe, O and C (86%) and the main elements of the particles of second type are C and O (98%). The aim of the research is to analyse the possibility to utilise wood ash from biomass for the production of ceramic products. Formation masses are prepared by incorporating from 5% to 60% of wood ash additive and burned at various temperatures. It is identified that this additive influences the properties of ceramic body, i.e. reduces drying and burning shrinkage, density, compressive strength, thermal conductivity, increases water absorption and porosity. Additive of wood ash from biomass influences the ceramic body as a natural pigment that brightens the ceramic body. Colour change is determined by sufficient amounts of calcium pyroxene in the composition thereof iron is inserted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Thermochemical Biomass Conversion Processes · Environmental and Industrial Safety

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. An investigation of the effectiveness of the utilization of biomass ashes as pozzolanic materials10.1016/j.conbuildmat.2014.06.071 ↗
2. Effects of two biomass ashes on asphalt binder: dynamic shear rheological characteristic analysis10.1016/j.conbuildmat.2014.01.075 ↗
3. M.C Borlini, J.L.C.C. Mendonça, R.A. Conte, D.G. Pinatti, C.M.F. Vieira, S.N. Monteiro, Effect of particle size of an ash from sugarcane bagasse in the properties of red ceramic, materials science forum 530–531, 538–43, in: F.H. Wohlbier (Ed.), Trans Tech Publications, 2006, online at .10.4028/0-87849-423-5.538 ↗
4. K.C.P. Faria, J.N.F. Holanda, Using SEM/EDS for characterization of clay ceramic bearing sugarcane bagasse ash waste, in: A. Méndez-Vilas, (Ed.), Current Microscopy Contributions to Advances in Science and Technology, pp. 1085–1092.
5. The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: an overview10.1016/j.resconrec.2011.02.002 ↗
6. Sugarcane bagasse ash as a potential quartz replacement in red ceramic10.1111/j.1551-2916.2007.02212.x ↗
7. Characterisation and technical feasibility of using biomass bottom ash for civil infrastructures10.1016/j.conbuildmat.2014.01.087 ↗
8. High temperature elemental losses and mineralogical changes in common biomass ashes10.1016/j.fuel.2005.08.020 ↗
9. Use of TMA to predict deposition behaviour of biomass fuels10.1016/j.fuel.2007.01.024 ↗
10. Pyrolysis of wood/biomass for bio-oil: a critical review10.1021/ef0502397 ↗
11. An overview of the composition and application of biomass ash: part 2. Potential utilisation, technological and ecological advantages and challenges10.1016/j.fuel.2012.10.001 ↗
12. Addition of bottom ash from biomass in calcium silicate masonry units for use as construction material with thermal insulating properties10.1016/j.conbuildmat.2013.11.018 ↗
13. Utilization of wood ash in concrete manufacturing10.1016/j.resconrec.2012.07.004 ↗
14. Potential of wood waste ash as an additive in concrete10.1061/(ASCE)0899-1561(2006)18:4(605) ↗
15. Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials10.1016/j.jenvman.2011.06.020 ↗
16. Application of biomass gasification fly ash for brick manufacturing10.1016/j.fuel.2010.07.057 ↗
17. Recycling of ash from biomass incinerator in clay matrix to produce ceramic bricks10.1016/j.jenvman.2010.10.022 ↗
18. Recycling of washed olive pomace ash for fired clay brick manufacturing10.1016/j.conbuildmat.2014.03.026 ↗
19. Utilisation of sludge waste from water treatment for ceramic products10.1016/j.conbuildmat.2012.12.041 ↗
20. Characterization of MSWI bottom ashes towards utilization as glass raw material10.1016/j.wasman.2007.05.004 ↗
21. Vitrification of municipal solid waste incinerator fly ash using Brown’s gas10.1021/ef049953z ↗
22. 57Fe Mössbauer study of iron distribution in a kaolin raw material: influence of the temperature and the heating rate10.1016/S0955-2219(01)00496-4 ↗
23. The colours of Ca-rich ceramic pastes: origin and characterization10.1016/S0169-1317(98)00024-6 ↗