journal article·2016-11

Design and evaluation of polyester fiber and SBR latex compound-modified perlite mortar with rubber powder

Fang Xu, Chao Peng, Jing Zhu, Jianping Chen

Publisher page

Abstract

Abstract This paper proposed a new kind of perlite mortar modified by rubber powder, polyester fiber and SBR latex. The orthogonal experiment design method was employed to study the mix design of this new kind of perlite mortar. The influence of the major mix design parameters on the working performance, mechanical and thermal properties of the perlite mortar was studied. Furthermore, X-ray diffraction, Optical Microscope and Scanning Electron Microscope were employed to study the microstructure and failure mechanism of the perlite mortar. The results indicated that SBR latex/cement ratio had a significant influence on the fluidity and unit dry weight of the perlite mortar. Expanded perlite/cement ratio and rubber powder/cement ratio were the major influence factors on the compressive and flexural strength. Furthermore, the addition of SBR latex and polyester fiber can effectively improve the softening coefficient and frost resistance of the perlite mortar. The compressive strength and thermal conductivity coefficient was nearly linearly proportional to the unit dry weight of the perlite mortar. The internal microscopic matrix of the perlite mortar showed the porous structure and a large amount of unhydrated expanded perlite. SBR latex reinforced the interfacial transition zone between cement hydrates and rubber particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Manufacture of high thermal conductivity resistant clay bricks containing perlite10.1016/j.buildenv.2006.10.016 ↗
2. Expanded perlite aggregate characterization for use as a lightweight construction raw material
3. Effect of silica fume and expanded perlite addition on the technical properties of the fly ash–lime–gypsum mixture10.1016/j.conbuildmat.2007.01.011 ↗
4. Preparation and thermal properties of paraffin/expanded perlite composite as form-stable phase change material10.1016/j.matlet.2013.06.105 ↗
5. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
6. Characterization of polyester polymer and polymer concrete10.1061/(ASCE)0899-1561(1993)5:1(62) ↗
7. Durability of polymer-modified lightweight aggregate concrete10.1016/S0958-9465(03)00022-2 ↗
8. SBR latex modified mortar rheology and mechanical behavior10.1016/j.cemconres.2003.09.006 ↗
9. Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete10.1016/j.cemconcomp.2008.01.002 ↗
10. Mechanical properties of polymer-modified concretes containing expanded polystyrene beads10.1016/j.conbuildmat.2005.08.001 ↗
11. Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete10.1016/j.matlet.2005.05.071 ↗
12. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete10.1016/j.enbuild.2010.11.008 ↗
13. Microscopic, physical and mechanical analysis of polypropylene fiber reinforced concrete10.1016/j.msea.2009.07.056 ↗
14. Toughness enhancement in steel fiber reinforced concrete through fiber hybridization10.1016/j.cemconres.2007.05.005 ↗
15. Influence of PP fiber and SBR latex on the mechanical properties of crumb rubber mortar10.1002/app.40591 ↗
16. Carbon fiber reinforced cement mortar improved by using acrylic dispersion as an admixture10.1016/S0008-8846(01)00599-3 ↗
17. Rubber tires particles as concrete aggregate10.1061/(ASCE)0899-1561(1993)5:4(478) ↗
18. The properties of rubberized concrete10.1016/0008-8846(95)00014-3 ↗
19. Mechanical properties of concrete with ground waste tire rubber10.1177/0361198196153200110 ↗
20. Investigation on polymer-rubber aggregate modified porous concrete10.1016/j.conbuildmat.2012.09.006 ↗
21. Improvement of chloride ion penetration resistance in cement mortars modified with rubber from worn automobile tires10.1016/j.cemconcomp.2009.04.004 ↗
22. Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): an overview10.1016/j.conbuildmat.2011.11.047 ↗
23. A two-staged surface treatment to improve properties of rubber modified cement composites10.1016/j.conbuildmat.2012.11.014 ↗
24. Mechanical characterization of cement-based mortars incorporating rubber aggregates from recycled worn tyres10.1016/j.buildenv.2004.05.012 ↗
25. Potential of rubber aggregates to modify properties of cement, based-mortars: improvement in cracking shrinkage resistance10.1016/j.conbuildmat.2005.06.036 ↗
26. The effects of pumice aggregate/cement ratios on the low-strength concrete properties10.1016/j.conbuildmat.2007.01.030 ↗
27. Concrete made with recycled tire rubber: effect of alkaline activation and silica fume addition10.1016/j.jclepro.2010.11.014 ↗
28. Properties of tire rubber ash mortar10.1016/j.cemconcomp.2004.01.004 ↗
29. Scrap-tyre-rubber replacement for aggregate and filler concrete10.1016/j.conbuildmat.2008.09.020 ↗
30. Use of tire rubber particles as addition to cement paste10.1016/S0008-8846(00)00373-2 ↗
31. Mechanical properties of steel fibre reinforced and rubberized cement-based mortars10.1016/j.matdes.2009.05.006 ↗
32. Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
33. Thermal conductivity of cement composites containing rubber waste particles: experimental study and modeling10.1016/j.conbuildmat.2006.11.011 ↗
34. Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material10.1016/j.conbuildmat.2014.04.054 ↗