journal article·2017-04Open access

Effects of AC-interference on chloride-induced corrosion of reinforced concrete

Andrea Brenna, Silvia Beretta, Fabio Bolzoni, MariaPia Pedeferri, Marco Ormellese

Abstract

Abstract AC interference is a cause of reinforcement corrosion. Since few data are available, the influence of AC on the localized corrosion on passive carbon steel in concrete is discussed based on tests performed in alkaline solution and in concrete slabs. AC was applied in the range 10–500 A/m 2 . Results allow stating that AC interference weakens steel passivity, increasing the passive current density, reducing both the passive interval and the [Cl − ]/[OH − ] molar ratio. Results confirmed that the critical alternate current density is in the range 30–100 A/m 2 , depending on the level of chlorides present into concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Bertolini · 2013
2. Chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
3. Critical chloride content in reinforced concrete – a review10.1016/j.cemconres.2009.08.006 ↗
4. Analysis of the variability of chloride threshold values in literature10.1002/maco.200905296 ↗
5. Investigation of reinforcement corrosion: 1. The pore electrolyte phase in chloride-contaminated concrete
6. Investigation of reinforcement corrosion: 2. Electrochemical monitoring of steel in chloride-contaminated concrete
7. Corrosion probability and statistical evaluation of corrosion data
8. The inhibitive effects of electrochemical treatment applied to steel in concrete10.1016/S0010-938X(99)00121-3 ↗
9. Effect of cathodic prevention on the chloride threshold for steel corrosion in concrete10.1016/j.electacta.2008.09.033 ↗
10. Critical chloride for reinforced concrete and its relationship to concrete resistivity10.1002/maco.200905302 ↗
11. Lazzari · 2006
12. EN 50162 · 2005
13. EN 1992-1-1 (Eurocode 2) · 2004
14. NACE 01110 · 2010
15. NACE 35110 · 2010
16. Corrosion behaviour of steel in concrete in the presence of stray current10.1016/j.corsci.2006.05.048 ↗
17. EN 50443 · 2011
18. AC corrosion: mechanism and proposed model
19. Effect of AC interference on cathodic protection monitoring10.1179/147842210X12722706885841 ↗
20. Effects of AC-interference on passive metals corrosion
21. A revised model for predicting corrosion of materials induced by alternating voltages10.1016/S0010-938X(96)00065-0 ↗
22. AC induced corrosion. the effect of an alternating voltage on electrodes under charge-transfer control10.5006/0010-9312-35.5.211 ↗
23. Linhardt · 2006
24. EN 15280 · 2013
25. EN 197/1 · 2000
26. Errors in the electrochemical evaluation of very small corrosion rates: I. Polarization resistance method applied to corrosion of steel in concrete10.1016/0010-938X(85)90021-6 ↗
27. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements10.1002/maco.19780290804 ↗
28. An initial effort to use the corrosion rate measurements for estimating rebar durability
29. Steel corrosion monitoring in normal and total-lightweight concretes exposed to chloride and sulphate solutions part II: Polarisation resistance measurements10.1016/S0008-8846(96)85005-8 ↗
30. A proposal of AC corrosion mechanism in cathodic protection
31. Electromechanical breakdown mechanism of passive film in alternating current-related corrosion of carbon steel under cathodic protection condition10.5006/1849 ↗
32. Pourbaix · 1974