Performance evaluation of asphalt mixture using brake pad waste as mineral filler
Source abstract
Abstract
Abstract The failed brake pads have been recognized as a kind of solid waste, which result in serious environmental problem. In order to provide an approach for treating the brake pad waste (BPW), this paper investigated the feasibility of using BPW as mineral filler in asphalt mixture. Firstly, BPW was laboratory manufactured into powder with a size lesser than 0.075 mm. Then, the effect of BPW powder on the physical and rheological properties of asphalt mortar was studied by the softening point test, the penetration test, the rotation viscosity test, and the dynamic shear rheological (DSR) test. The results showed that the addition of BPW powder could improve the viscosity and high temperature performance of asphalt mortar. Finally, the influence of BPW powder on the mechanical properties of asphalt mixture was analyzed by the Hamburg wheel tracking test, the accelerated freezing-thawing test, the dynamic uniaxial compression test, the semi-circular bending test and the four-point bending fatigue test. Although the low temperature property of WBP mixture was worse than the control asphalt mixture with limestone filler, BPW mixture has better anti-moisture, anti-rutting and fatigue properties. Asphalt mixture containing BPW filler showed satisfactory performance improvement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Brake Systems and Friction Analysis · Geotechnical and construction materials studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A study of the wear mechanisms of disk and shoe brake pads10.1016/j.engfailanal.2015.01.004 ↗
2. Evolution of heavy-duty vehicle fuel efficiency policies in major markets10.1007/s11027-015-9632-5 ↗
3. On the corrosion resistance of half-metallic composite brake pads for railroad cars10.3103/S1068366615020130 ↗
4. Automotive brake pads made with a bioresin matrix10.1016/j.indcrop.2015.12.090 ↗
5. Friction and surface fracture of a silicon carbide ceramic brake disc tested against a steel pad10.1016/j.jeurceramsoc.2015.07.009 ↗
6. On the nature of tribological contact in automotive brakes10.1016/S0043-1648(01)00849-3 ↗
7. Wear behavior of asbestos-free eco-friendly composites for automobile brake materials10.1007/s40544-016-0111-0 ↗
8. Noise performance improvements and tribological consequences of a pad-on-disc system through groove-textured disc surface10.1016/j.triboint.2016.05.030 ↗
9. Urban air quality: the challenge of traffic non-exhaust emissions10.1016/j.jhazmat.2014.04.053 ↗
10. Toxicity and mutagenicity of low-metallic automotive brake pad materials10.1016/j.ecoenv.2016.05.003 ↗
11. Experimental study on recovery of copper from wasted brake pad
12. Influence of demolition waste used as recycled aggregate on performance of asphalt mixture10.1080/14680629.2013.779304 ↗
13. Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags10.1016/j.jhazmat.2010.05.104 ↗
14. Performance characteristic of asphalt mixture with basic oxygen furnace slag10.1016/j.conbuildmat.2012.09.056 ↗
15. Environmental performance and mechanical analysis of concrete containing recycled asphalt pavement (RAP) and waste precast concrete as aggregate10.1016/j.jhazmat.2013.11.040 ↗
16. Mechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete10.1016/j.jhazmat.2012.07.070 ↗
17. Effect of fly ash on properties of crushed brick and reclaimed asphalt in pavement base/subbase applications10.1016/j.jhazmat.2016.09.039 ↗
18. Effects of two biomass ashes on asphalt binder: dynamic shear rheological characteristic analysis10.1016/j.conbuildmat.2014.01.075 ↗
19. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures10.1016/j.conbuildmat.2012.02.036 ↗
20. Advanced rheological characterization of reacted and activated rubber (RAR) modified asphalt binders10.1016/j.conbuildmat.2016.06.043 ↗
21. Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers10.1016/j.conbuildmat.2016.06.063 ↗
22. Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder10.1016/j.conbuildmat.2014.06.069 ↗
23. Friction behavior of granite powder added brake pads10.3139/120.110766 ↗
24. Standard Test Method for Softening Point of Bitumen (Ring-and-ballapparatus), ASTM D36-06.
25. Standard Test Method for Ductility of Bituminous Materials, ASTM D113-07.
26. Standard Test Method for Penetration of Bituminous Materials, ASTM D5–13.
27. Standard Specification for Superpave Volumetric Mix Design, AASHTO M 323.
28. Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer, ASTM D4402-15.
29. Standard Method of Test for Determining the Rheological Properties of Asphalt Binder using a Dynamic Shear Rheometer (DSR), AASHTO, Designation T 315.
30. Standard Method of Test for “Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA), AASHTO, Designation T 324.
31. 2009
32. Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, AASHTO Designation T 283.
33. Standard Test Method for Dynamic Modulus of Asphalt Mixtures, ASTM D3497-1979, 2003.
34. Bituminous Mixtures Test Methods for Hot Mix Asphalt Part 44: Crack Propagation by Semi-circular Bending Test, EN 12697-44-2010.
35. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research10.1016/j.conbuildmat.2015.12.046 ↗
36. Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending, AASHTO Designation T 321.
37. Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen10.1016/j.conbuildmat.2014.06.066 ↗
38. Developing laboratory fatigue and resilient modulus models for modified asphalt mixes with waste plastic bottles (PET)10.1016/j.conbuildmat.2014.06.054 ↗