journal article·2017-09

Nanoparticles surface treatment on cemented materials for inhibition of bacterial growth

Tahereh Noeiaghaei, Navdeep Dhami, Abhijit Mukherjee

Publisher page

Abstract

Abstract Bacterial growth on cemented materials such as concrete can cause degradation and early ageing. This paper explores the bactericidal characteristics of cementitious materials surface treated with zinc oxide (ZnO) and silver (Ag) nanoparticles. The growth of gram positive Bacillus cereus and gram negative Escherichia coli has been monitored. The growth inhibitory performance of nanoparticles against two model bacteria was further examined at different surface pH of mortar samples and different bacterial cell densities. After the seven-day experimental period, more than 60% reduction in the number of viable cells of both model bacteria was obtained at all tested pH values when nanoparticles with a concentration of 250 mg/l were added at the beginning of culturing time. However, delayed addition of nanoparticles at the mid-logarithmic growth phase, i.e., higher cell densities, resulted in less growth inhibition. Ag nanoparticles showed the highest inhibition due to the high degree of nanoparticle stability and uniform particle size. On the other hand, the stability of ZnO nanoparticles in the experimental mixture was significantly influenced by the pH change and aggregation, which resulted in lower inhibition efficiencies. Gram-positive Bacillus cereus was found to be less sensitive to both tested nanoparticles, compared with Gram-negative Escherichia coli. The experiment demonstrates the efficacy of nanoparticles in inhibiting bacterial growth on cementitious materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoparticles: synthesis and applications · Bacterial biofilms and quorum sensing · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
2. Microbial impact on building materials: an overview10.1007/BF02480875 ↗
3. Subsea pipeline
4. Evaluation of inhibitory effect of TiO2 nanocoatings against microalgal growth on clay brick façades under weak UV exposure conditions10.1016/j.buildenv.2013.03.003 ↗
5. Development of anti-fungal mortar and concrete using zeolite and zeocarbon microcapsules10.1016/j.cemconcomp.2009.04.012 ↗
6. The influence of crude oil products on RC structure destruction10.3846/13923730.2011.561522 ↗
7. Microbial corrosion of concrete10.1007/BF01949869 ↗
8. D. Trejo, D.F. Paul, M. Sanchez, G. Carlos, S. Wei, L. Li, Analysis and Assessment of Microbial Biofilm-Mediated Concrete Deterioration, 2008.
9. Modelling concrete deterioration in sewers using theory and field observations10.1016/j.cemconres.2015.07.003 ↗
10. The experimental investigation of width of semi-carbonation zone in carbonated concrete10.1016/j.conbuildmat.2014.04.095 ↗
11. The dual role of microbes in corrosion10.1038/ismej.2014.169 ↗
12. Microbial ecology of crown corrosion in sewers10.1061/(ASCE)0733-9372(1991)117:6(751) ↗
13. Importance of hydrogen sulfide thiosulfate, and methylmercaptan for growth of thiobacilli during simulation of concrete corrosion10.1128/aem.53.7.1645-1648.1987 ↗
14. Cement-based biocide coatings for controlling algal growth in water distribution canals10.1016/j.cemconcomp.2008.06.012 ↗
15. Corrosion by bacteria of concrete in sewerage systems and inhibitory effects of formates on their growth10.1016/S0043-1354(01)00473-0 ↗
16. A novel and simple treatment for control of sulfide induced sewer concrete corrosion using free nitrous acid10.1016/j.watres.2014.12.020 ↗
17. Evaluation of coatings, mortars and mix design for protection of concrete against sulphur oxidising bacteria10.1016/j.conbuildmat.2011.04.014 ↗
18. Antimicrobial activity of metal oxide nanoparticles against gram-positive and gram-negative bacteria: a comparative study10.2147/IJN.S35347 ↗
19. Why are silver nanoparticles more toxic than bulk silver? Towards understanding the dissolution and toxicity of silver nanoparticles10.1016/S1452-3981(23)07783-0 ↗
20. Antimicrobial applications of nanotechnology: methods and literature
21. Antimicrobial nanomaterials for water disinfection and microbial control: potential applications and implications10.1016/j.watres.2008.08.015 ↗
22. Effect of nano-sized mesoporous silica MCM-41 and MMT on corrosion properties of epoxy coating10.1016/j.porgcoat.2012.07.009 ↗
23. The effect of nanoparticles on the adhesion of epoxy adhesive10.1016/j.matlet.2006.02.038 ↗
24. Corrosion resistance of nanoparticle-incorporated nano coatings
25. Silsesquioxane-based hybrid nanocomposites with methacrylate units containing titania and/or silver nanoparticles as antibacterial/antifungal coatings for monumental stones10.1016/j.mseb.2013.04.004 ↗
26. Titanium dioxide based strategies to prevent algal fouling on cementitious materials10.1016/j.cemconcomp.2012.08.030 ↗
27. Photocatalytic activity of titanium dioxide nanoparticle coatings applied on autoclaved aerated concrete: effect of weathering on coating physical characteristics and gaseous toluene removal10.1016/j.jhazmat.2011.12.037 ↗
28. Evaluation of the resistance of mortars coated with silver bearing zeolite to bacterial-induced corrosion10.1016/j.corsci.2007.08.012 ↗
29. Evaluation of the bactericidal characteristics of nano-copper oxide or functionalized zeolite coating for bio-corrosion control in concrete sewer pipes10.1016/j.corsci.2009.08.046 ↗
30. When size really matters: size-dependent properties and surface chemistry of metal and metal oxide nanoparticles in gas and liquid phase environments10.1021/jp806073t ↗
31. Effects of humic acid and electrolytes on photocatalytic reactivity and transport of carbon nanoparticle aggregates in water10.1016/j.watres.2012.05.018 ↗
32. Antibiofilm properties of chemically synthesized silver nanoparticles found against Pseudomonas aeruginosa10.1186/1477-3155-12-2 ↗
33. Use of nanomaterials in the European construction industry and some occupational health aspects thereof10.1007/s11051-010-0195-9 ↗
34. Potential environmental and human health impacts of nanomaterials used in the construction industry
35. Peer reviewed: design through the 12 principles of green engineering10.1021/es032373g ↗
36. Antimicrobial susceptibility testing: a review of general principles and contemporary practices10.1086/647952 ↗
37. Stability of metal oxide nanoparticles in aqueous solutions10.2166/wst.2010.787 ↗
38. Three strategies to stabilise nearly monodispersed silver nanoparticles in aqueous solution10.1186/1556-276X-7-151 ↗
39. Characterization of biologically available wood combustion particles in cell culture medium10.14573/altex.2012.2.183 ↗
40. Conjugation of curcumin with PVP capped gold nanoparticles for improving bioavailability10.1016/j.msec.2012.07.022 ↗
41. Stability and aggregation of metal oxide nanoparticles in natural aqueous matrices10.1021/es902987d ↗
42. PVP-coated silver nanoparticles showing antifungal improved activity against dermatophytes10.1007/s11051-014-2726-2 ↗
43. Antibacterial properties of nanoparticles10.1016/j.tibtech.2012.06.004 ↗
44. Antibacterial effect of silver nanoparticles and the modeling of bacterial growth kinetics using a modified Gompertz model10.1016/j.bbagen.2014.10.022 ↗
45. Enhanced antibacterial and anti-biofilm activities of silver nanoparticles against gram-negative and gram-positive bacteria10.1186/1556-276X-9-373 ↗
46. Interaction and nanotoxic effect of ZnO and Ag nanoparticles on mesophilic and halophilic bacterial cells10.1016/j.biortech.2010.07.117 ↗
47. Mechanisms of antibiotic resistance in bacterial biofilms10.1078/1438-4221-00196 ↗
48. Selective toxicity of ZnO nanoparticles toward Gram-positive bacteria and cancer cells by apoptosis through lipid peroxidation10.1016/j.nano.2010.10.001 ↗
49. Adaptation of a neutrophilic dairy-associated Bacillus cereus isolate to alkaline pH10.1046/j.1365-2672.2002.01504.x ↗
50. Sensitivity of Escherichia coli O157:H7 to commercially available alkaline cleaners and subsequent resistance to heat and sanitizers10.1128/AEM.70.3.1795-1803.2004 ↗
51. Container to characterization: Impacts of metal oxide handling, preparation, and solution chemistry on particle stability10.1016/j.colsurfa.2010.07.019 ↗
52. Activity of amine oxide against biofilms of Streptococcus mutans: a potential biocide for oral care formulations10.1093/jac/dki325 ↗
53. Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)10.1007/s11051-006-9150-1 ↗
54. Influence of particle size on the antibacterial activity of zinc oxide10.1016/S1466-6049(01)00197-0 ↗
55. Effects of water chemistry on the dissolution of ZnO nanoparticles and their toxicity to Escherichia coli10.1016/j.envpol.2012.10.026 ↗
56. Aggregation and dissolution of 4 nm ZnO nanoparticles in aqueous environments: influence of ph, ionic strength, size, and adsorption of humic acid10.1021/la200570n ↗
57. Population dynamics of antibiotic treatment: a mathematical model and hypotheses for time-kill and continuous-culture experiments10.1128/AAC.00381-10 ↗
58. Antifungal effects of cement mortars with two types of organic antifungal agents10.1016/j.cemconres.2004.06.021 ↗
59. Characterization of corrosive bacterial consortia isolated from petroleum-product-transporting pipelines10.1007/s00253-009-2289-9 ↗
60. Mechanisms of bacterial resistance to biocides10.1016/0964-8305(95)00056-9 ↗
61. Nanomaterials and nanoparticles: Sources and toxicity10.1116/1.2815690 ↗
62. Antibacterial activity of silver-nanoparticles against Staphylococcus aureus and Escherichia coli
63. Zn2+ release from zinc and zinc oxide particles in simulated uterine solution10.1016/j.colsurfb.2005.12.007 ↗