journal article·2017-10

Quantification of physicochemical properties, activation energy, and temperature susceptibility of foamed asphalt binders

Mohd Rosli Mohd Hasan, Zhanping You, Xu Yang, Particia A. Heiden

Publisher page

Abstract

Abstract Applications of foamed binder have been spurred by the increased focus on sustainable construction approach and stringent environmental laws. This study was initiated to evaluate the performance of foamed asphalt binder produced using a combination of physical and chemical foaming agents, known as ethanol and sodium bicarbonate (NaHCO 3 ), respectively. This paper presents the properties of foamed asphalt binder assessed using Fourier transform infra-red (FTIR) spectroscopy, asphalt binder cracking device (ABCD), and activation energy analysis. The FTIR test was conducted to evaluate the possibility of any chemical reaction taken place, as well as to characterize the effects of oxidation on the chemical functional groups present in foamed asphalt binders. The ABCD test was carried out to evaluate the thermal cracking temperatures of prepared binders. The activation energy of each binder type was analyzed based on the viscosity test results and Arrhenius equation to estimate the energy required to overcome the intermolecular forces between the molecules in the asphalt binder to initiate flow. The FTIR results reveal that ethanol alone is unreactive with the binder, where most of the functional groups have shown comparable change ratios. This indicates that there are no chemical reactions that occurred in the foamed asphalt binders, either with the addition of ethanol or various combinations of ethanol and NaHCO 3 . The application of foaming agents definitely lowers the activation energy to overcome the intermolecular forces between the molecules in the asphalt binder to allow flow to occur. The foamed binders were found to have a comparable or better low temperature characteristic as compared to the control binder. A higher dosage of foaming agents proportionally increased the resistance to thermal cracking of asphalt binders. Overall, the use of foaming technique and newly proposed foaming agents has shown great potential to produce eco-friendly pavement material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Enhanced Oil Recovery Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Cooling down the mix: NAPA explores new “Warm Mix Asphalt” technologies developed in Europe
2. A. Ventura, et al., Environmental comparison at industrial scale of hot and half-warm mix asphalt manufacturing processes. Transportation Research Board 88th Annual Meeting, 2009. Transportation Research Board, pp. 12.
3. Low-energy asphalt with performance of hot-mix asphalt10.1177/0361198106196200112 ↗
4. Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate10.3141/2126-14 ↗
5. B. Vuong, et al., Review of overseas trials of warm mix asphalt pavements and current usage by Austroads members, 2012.
6. A. Kvasnak, et al., Evaluation of Gencor Green Machine Ultrafoam GX. NCAT Report 10-03. National Center for Asphalt Technology, 2010.
7. MAXAM. Aquablack Warm Mix Asphalt. MAXAM Inc. [Cited March 2014: http://maxamequipment.com/AQUABlackWMA.htm] 2014.
8. Astec. Double Barrel Green System. [Cited at March 2014: http://www.astecinc.com] 2014.
9. Stansteel. Accu-Shear. [Cited at March 2014: http://www.stansteel.com/accushear.asp] 2014.
10. Csanyi, L.H., Mortar theory for use of ungraded aggregates in bituminous mixes, in Highway Research Board Bulletin, 1956, pp. 1–49.
11. L.H. Csanyi, Foamed Asphalt, in American Road Builders Association (ARBA) Technical Bulletin, 1959, pp. 3–14.
12. K. Hansen, D. Newcomb, Asphalt Pavement Mix Production Survey on Reclaimed Asphalt Pavement, Reclaimed Asphalt Shingles, and Warm-mix Asphalt Usage: 2009-2010. National Asphalt Pavement Association, 2011.
13. K.R. Hansen, A. Copeland, 2nd Annual Asphalt Pavement Industry Survey on Reclaimed Asphalt Pavement, Reclaimed Asphalt Shingles, and Warm-Mix Asphalt Usage: 2009–2011, 2013.
14. Effect of rheology on the bitumen foamability and mechanical properties of foam bitumen stabilised mixes10.1080/10298430601149650 ↗
15. Sensitivity of Nozzle-Based Foamed Asphalt Binder Characteristics to Foaming Parameters10.3141/2444-14 ↗
16. Investigation of moisture dissipation in foam-based warm mix asphalt using synchrotron-based X-ray microtomography10.1061/(ASCE)MT.1943-5533.0000433 ↗
17. Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods10.1016/j.conbuildmat.2013.02.081 ↗
18. T. Gandhi, Effects of warm asphalt additives on asphalt binder and mixture properties, Clemson University, 2008.
19. Asphalt Binders Blended with a High Percentage of Biobinders: Aging Mechanism Using FTIR and Rheology
20. Attenuated total reflection (ATR) fourier transform infrared (FT-IR) spectroscopy of oxidized polymer-modified bitumens10.1366/10-06217 ↗
21. Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: application to road bitumens10.1016/S0016-2361(00)00121-6 ↗
22. Foaming effects on binder chemistry and aggregate coatability using foamed bitumen10.1080/14680629.2011.9713896 ↗
23. Direct and continuous methodological approach to study the ageing of fossil organic material by infrared microspectrometry imaging10.1016/S0003-2670(01)01235-1 ↗
24. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
25. Evaluation of Rediset for use in warm-mix asphalt: a review of the literatures
26. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives10.1016/j.conbuildmat.2012.07.074 ↗
27. S.W. Haider, et al. Characterizing temperature susceptibility of asphalt binders using activation energy flow, in: Transportation and Development Institute Congress 2011: Integrated Transportation and Development for a Better Tomorrow. 2011. Chicago, Illinois.10.1061/41167(398)48 ↗
28. Ranking asphalt binders by activation energy for flow
29. D. Salomon, H. Zhai. Asphalt binder flow activation energy and its significance for compaction effort, in: Proceedings of the 3rd Eurasphalt and Eurobitume Congress, Vienna, Austria, 2004.
30. Evaluation of the rheological properties and activation energy of virgin and recovered asphalt binder blends
31. S.-S. Kim, Asphalt binder cracking device to reduce low temperature asphalt pavement cracking, 2010.
32. Kim · 2007
33. Comparative study on the properties of WMA mixture using foamed admixture and free water system10.1016/j.conbuildmat.2013.06.028 ↗
34. Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis10.1016/j.conbuildmat.2015.05.029 ↗
35. Laboratory moisture susceptibility evaluation of WMA under possible field conditions10.1016/j.conbuildmat.2015.10.004 ↗
36. Performances evaluation of Cecabase® RT in warm mix asphalt technology10.1016/j.sbspro.2013.08.311 ↗
37. Laboratory performance based cost assessment of warm-mix asphalt concrete technologies
38. M.R. Mohd. Hasan, et al., Evaluations of Plant-Produced Foamed Warm Mixture Asphalt, in Geo-China, 2016, pp. 205–212.10.1061/9780784480052.025 ↗
39. Evaluation of warm mix asphalt produced at various temperatures through dynamic modulus testing and four point beam fatigue testing
40. Moisture damage and fatigue cracking of foamed warm mix asphalt using a simple laboratory setup
41. Mechanical properties of porous asphalt pavement materials with warm mix asphalt and RAP10.1061/(ASCE)TE.1943-5436.0000307 ↗
42. Laboratory evaluation of warm mix asphalt: a preliminary study
43. Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and bioasphalt10.1061/(ASCE)MT.1943-5533.0000295 ↗
44. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
45. Direct measurement of asphalt binder thermal cracking10.1061/(ASCE)0899-1561(2005)17:6(632) ↗
46. Low-temperature thermal cracking of asphalt binder by asphalt binder cracking device10.1177/0361198106196200104 ↗
47. DRIFT study of the oxidation and the ammoxidation of toluene over a TiO 2 (B)-supported vanadia catalyst10.1016/0304-5102(93)80022-M ↗
48. Study on combustion mechanism of asphalt binder by using TG–FTIR technique10.1016/j.fuel.2010.01.012 ↗
49. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS-and SBS/sulfur-modified asphalts10.1016/j.conbuildmat.2010.06.048 ↗
50. Improving the aging resistance of asphalt by addition of Zinc dialkyldithiophosphate10.1016/j.fuel.2005.08.023 ↗
51. Studies on the aging behavior of the Arabian asphalts10.1016/S0016-2361(99)00018-6 ↗
52. Asphalt aging in Texas roads and test sections
53. Swelling process of rubber in asphalt and its effect on the structure and properties of rubber and asphalt10.1016/j.conbuildmat.2011.10.021 ↗
54. Effects of physio-chemical factors on asphalt aging behavior10.1061/(ASCE)MT.1943-5533.0000786 ↗
55. Inhibitory action of flame retardant on the dynamic evolution of asphalt pyrolysis volatiles10.1016/j.fuel.2012.10.029 ↗
56. T. Lakhanisky, Sodium Bicarbonate: SIDS inital assessment report for SIAM 15, Boston, USA, 2002.
57. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology10.1016/j.jtte.2016.03.001 ↗
58. B.W. Hailesilassie, et al., Evolution of bubble size distribution during foam bitumen formation and decay, in: 12th International Conference on Asphalt Pavements, ISAP 2014; Raleigh, NC; United States; 1 June 2014 through 5 June 2014. 2014. CRC Press-Taylor & Francis Group.
59. M. Tia, B.E. Ruth. Basic Rheology and Theological Concepts Established by HE Schweyer. in Asphalt Rheology: Relationship to Mixture: a Symposium Sponsored by ASTM Committee D-4 on Road and Paving Materials, Nashville, TN, 11 Dec. 1985, ASTM International, 1987.10.1520/STP18525S ↗
60. Relationship between the rheological properties of asphalt and the rheological properties of mixtures and pavements10.1520/STP18521S ↗
61. R. Roque, M. Tia, B.E. Ruth, Asphalt rheology to define the properties of asphalt concrete mixtures and the performance of pavement. Asphalt rheology; relationship 10 mixture, ASTM STP 941. O. E. Briscoe, cd., ASTM, Philadelphia, Pa., 1987, 3–27.10.1520/STP18520S ↗