Comparison of rheological properties and hot storage characteristics of asphalt binders modified with devulcanized ground tire rubber and other modifiers
Source abstract
Abstract
Abstract The ground tire rubber (GTR) modified binder has been affirmed to improve resistance to rutting, moisture susceptibility, low temperature cracking and durability of asphalt pavement. However, the liable phase separation of GTR modified asphalt binders results in a big issue at construction site. Therefore, an alternative crumb rubber, devulcanized ground tire rubber (DGTR), is manufactured with devulcanization process and as an additive to substitute for GTR or styrene-butadiene-styrene (SBS) in PG76 binders preparation process. The objective of this study was to compare the rheological properties and hot storage characteristics of PG76 asphalt binders produced with DGTR and two alternative polymers for future applications. The Brookfield Rotational Viscometer, Dynamic Shear Rheometer, and hot storage test were performed with all modified asphalt binders. The results indicated that PG76 binders modified with DGTR had approaching apparent viscosity values compared to GTR or SBS modified binders. In addition, the application of DGTR could reach the similar modification effect on the High PG critical temperature as well as GTR modified binders with same concentration. While those binders modified with DGTR exhibited remarkable lower tendency of phase separation than other modified binders regardless of base binder source. Moreover, similar trends were observed from the characteristics of creep and creep recovery, and Multiple Stress Creep and Recovery (MSCR) of all modified binders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Resource recovery from used rubber tires10.1016/S0301-4207(99)00025-2 ↗
2. Rubber modified concrete improved by chemically active coating and silane coupling agent10.1016/j.conbuildmat.2013.06.072 ↗
3. A two-staged surface treatment to improve properties of rubber modified cement composites10.1016/j.conbuildmat.2012.11.014 ↗
4. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review10.1016/S2095-7564(15)30087-8 ↗
5. Recycling of waste tire rubber in asphalt and portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
6. Effect of weathering on rubberized porous European mixture10.1061/(ASCE)MT.1943-5533.0001551 ↗
7. Ten-year performance evaluation of asphalt-rubber surface mixes
8. G. Way, OGFC meets CRM, where the rubber meets the rubber, 12years of durable success, AR2000[R], Portugal, 2000.
9. High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers10.1016/j.conbuildmat.2016.02.069 ↗
10. Effects of GTR and treated GTR on asphalt binder and high-rap mixtures10.1061/(ASCE)MT.1943-5533.0000858 ↗
11. Effect of crumb rubber modifiers (CRM) on performance related properties of asphalt binders
12. Particle size effect of crumb rubber on rheology and morphology of asphalt binders with long-term aging10.1080/14680629.2008.9690108 ↗
13. The effect of crumb rubber modifier on the performance properties of rubberized binders in HMA pavements10.1016/j.conbuildmat.2007.04.010 ↗
14. Quantitative analysis of functional polymer in recycled tyre rubber used in modified asphalt binders
15. Rheological studies of asphalt with ground tire rubber
16. Surface modified ground rubber tire by grafting acrylic acid for paving applications10.1016/j.conbuildmat.2012.02.040 ↗
17. Laboratory investigation of different standards of phase separation in crumb rubber modified asphalt binders10.1061/(ASCE)MT.1943-5533.0000751 ↗
18. Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens10.1016/j.fuel.2004.04.003 ↗
19. Effect of cross-linking agent on the properties of asphalt rubber10.1016/j.conbuildmat.2014.03.039 ↗
20. Development of rubber and asphalt binders by depolymerization and devulcanization of scrap tires in asphalt10.1177/0361198196153000107 ↗
21. Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers10.1007/s10853-012-6564-2 ↗
22. Recent developments in the application of chemical approaches to rubberized asphalt10.1016/j.conbuildmat.2016.11.077 ↗
23. AASHTO T316 · 2004
24. Factors controlling the effect of crumb rubber on critical properties of asphalt binders
25. AASHTO T315, Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR), Washington: AASHTO, 2016.
26. Carl · 2010
27. Rheology investigation of combined binders from various polymers with GTR under a short term aging process10.1016/j.conbuildmat.2015.05.051 ↗
28. ASTMD7405-10a, Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer, American Society of Testing Materials, 2010.
29. SP-1, Superpave series No. 1, Asphalt Institute, 2003.