Magnesium phosphate cements formulated with low grade magnesium oxide incorporating phase change materials for thermal energy storage
Source abstract
Abstract
Magnesium Phosphate Cement (MPC) has become an essential reference for investigators seeking alternatives to the use of Ordinary Portland Cement (OPC) in building sector because of its high environmental impact. The research group developed a MPC formulated with low-grade MgO (LG-MgO) by-product, which could be considered as a sustainable MPC (sust-MPC). This research focuses on the incorporation of different percentages of Microencapsulated Phase Change Materials (MPCM) into sust-MPC, due to their ability to reduce energy consumption of heating, ventilating, and air conditioning (HVAC) systems. The study consists of an exhaustive characterization of thermal sustainable MPC (TS-MPC) dosages which incorporate air-entraining additive (AEA) and MPCM to improve their thermal behaviour. Thus, TS-MPC would reduce the use of HVAC systems contributing to the decrease of CO2 emissions and increasing energy efficiency in buildings. Moreover, properties such as bulk density, porosity, thermal conductivity, modulus of elasticity, compressive strength, and flexural strength are analysed to evaluate the potential use of these cements as a part of a passive conditioning system. Results show the proper behaviour of these cements to reduce thermal oscillation in buildings. Experimental results demonstrated the relation between the amount of the MPCM and the AEA percentage as well as the thermal and mechanical properties of the TS-MPC due to their contribution to increase the porosity. Furthermore, it should be noted the increase of porosity and the reduction of thermal conductivity of the optimal formulation, which are 60% higher and 50% lower than the sust-MPC obtained without MPCM and additive, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Aerogels and thermal insulation · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. The trend in current and near future energy consumption from a statistical perspective10.1016/S0306-2619(00)00033-7 ↗
2. The material basis of the global economy. Worldwide patterns of natural resource extraction and their implications for sustainable resource use policies10.1016/j.ecolecon.2007.02.034 ↗
3. A review on buildings energy consumption information10.1016/j.enbuild.2007.03.007 ↗
4. Life cycle assessment of building materials: comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential10.1016/j.buildenv.2010.12.002 ↗
5. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
6. Synthesis of Portland cement and calcium sulfoaluminate-belite
7. Novel magnesium phosphate cements with high early strength and antibacterial properties10.1016/j.actbio.2010.12.008 ↗
8. Stabilization of rocky flats Pu-contaminated ash within chemically bonded phosphate ceramics10.1016/S0022-3115(98)00650-3 ↗
9. Advances in encapsulation technologies for the management of mercury-contaminated hazardous wastes10.1016/j.jhazmat.2004.08.010 ↗
10. Leaching behaviour of magnesium phosphate cements containing high quantities of heavy metals10.1016/j.jhazmat.2009.10.077 ↗
11. Factors influencing properties of phosphate cement-based binder for rapid repair of concrete10.1016/S0008-8846(98)00230-0 ↗
12. Property evaluation of magnesium phosphate cement mortar as patch repair material10.1016/j.conbuildmat.2009.10.039 ↗
13. Effect of the combination of fly ash and silica fume on water resistance of magnesium – potassium phosphate cement10.1016/j.conbuildmat.2015.12.085 ↗
14. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
15. A.S. Wagh, Chemically Bonded Phosphate Ceramic Matrix Composites, Chem. Bond. Phosphate Ceram. (2004) 157–176. doi:10.1016/B978-008044505-2/50018-1.10.1016/B978-008044505-2/50018-1 ↗
16. J. Formosa, M.A. Aranda, J.M. Chimenos, J.R. Rosell, A.I. Fernández, O. Ginés, Cerámica y Vidrio Cementos químicos formulados con subproductos de óxido de magnesio, 297 (2008) 293–297.10.3989/cyv.2008.v47.i5.169 ↗
17. Magnesium phosphate cements formulated with a low-grade MgO by-product: physico-mechanical and durability aspects10.1016/j.conbuildmat.2015.05.071 ↗
18. Magnesium phosphate cement formulated with low grade magnesium oxide with controlled porosity and low thermal conductivity as a function of admixture10.1016/j.ceramint.2016.06.159 ↗
19. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials10.1016/S0196-8904(03)00131-6 ↗
20. Use of microencapsulated PCM in concrete walls for energy savings10.1016/j.enbuild.2006.03.030 ↗
21. PCM thermal storage in buildings: a state of art10.1016/j.rser.2005.10.002 ↗
22. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
23. Use of phase change materials for thermal energy storage in concrete: an overview10.1016/j.conbuildmat.2013.04.031 ↗
24. D. ASTM, 5930--01. Standard test method for thermal conductivity of plastics by means of a transient line-source technique, Am. Soc. Test. Mater., 2002.
25. A.E. de Normalización y Certificación, UNE-EN 12504-4: ensayos de hormigón en estructuras. Determinación de la velocidad de los impulsos ultrasónicos, 2006. Available from: .
26. A.E. de Normalización y Certificación, UNE-EN 196-1: métodos de ensayo de cementos. Parte 1, Determinación de resistencias mecánicas, AENOR, 2005. Available from: .
27. Preparation and characterization of microencapsulated phase change materials for use in building applications
28. Vargaftik · 1993
29. Temperature-dependent thermal properties of solid/liquid phase change even-numbered n-alkanes: N-Hexadecane, n-octadecane and n-eicosane10.1016/j.apenergy.2015.01.054 ↗
30. Thermal properties of n-pentadecane, n-heptadecane and n-nonadecane in the solid/liquid phase change region10.1016/j.ijthermalsci.2015.03.001 ↗
31. The behavior of self-compacting concrete containing micro-encapsulated phase change materials10.1016/j.cemconcomp.2009.08.002 ↗
32. Experimental research on the use of micro-encapsulated phase change materials to store solar energy in concrete floors and to save energy in Dutch houses10.1016/j.solener.2011.02.017 ↗
33. G. Sant, N. Neithalath, Compositions comprising phase change material and concrete and uses thereof, US20150007752 A1, 2013. Available from: .
34. Evolution of microstructure and performance in magnesium potassium phosphate ceramics: role of sintering temperature of MgO powder10.1016/j.ceramint.2016.07.182 ↗
35. Investigation of magnesium phosphate cement hydration in diluted suspension and its retardation by boric acid10.1016/j.cemconres.2016.04.010 ↗
36. Mechanisms of k-struvite formation in magnesium phosphate cements10.1016/j.cemconres.2016.11.008 ↗
37. A.E. de Normalización y Certificación, UNE-EN 12467:2013 placas planas de fibrocemento : especificaciones del producto y métodos de ensayo, AENOR, 2013. Available from: .
38. Brandt · 2009
39. N.P. Cheremisinoff, Handbook of ceramics and composites. Vol. 2, Mechanical Properties and Specialty Applications, Marcel Dekker, New York, 1992.